From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH S39 v2 05/15] ice: Add DCBNL ops required to configure ETS in CEE for SW DCB
Date: Thu, 13 Feb 2020 13:31:19 -0800 [thread overview]
Message-ID: <20200213213129.34023-4-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20200213213129.34023-1-anthony.l.nguyen@intel.com>
From: Avinash JD <avinash.dayanand@intel.com>
Couple of DCBNL ops are required for configuring ETS in SW DCB CEE mode. If
these functions are not added, it'll break the CEE functionality.
Signed-off-by: Avinash JD <avinash.dayanand@intel.com>
---
drivers/net/ethernet/intel/ice/ice_dcb_nl.c | 43 +++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_dcb_nl.c b/drivers/net/ethernet/intel/ice/ice_dcb_nl.c
index c572aa5c28e0..589b820a6b5b 100644
--- a/drivers/net/ethernet/intel/ice/ice_dcb_nl.c
+++ b/drivers/net/ethernet/intel/ice/ice_dcb_nl.c
@@ -540,6 +540,30 @@ ice_dcbnl_get_pg_tc_cfg_rx(struct net_device *netdev, int prio,
*pgid = pi->local_dcbx_cfg.etscfg.prio_table[prio];
}
+/**
+ * ice_dcbnl_set_pg_tc_cfg_rx
+ * @netdev: relevant netdev struct
+ * @prio: corresponding user priority
+ * @prio_type: the traffic priority type
+ * @pgid: the PG ID
+ * @bw_pct: BW percentage for corresponding BWG
+ * @up_map: prio mapped to corresponding TC
+ *
+ * lldpad requires this function pointer to be non-NULL to complete CEE config.
+ */
+static void
+ice_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev,
+ int __always_unused prio,
+ u8 __always_unused prio_type,
+ u8 __always_unused pgid,
+ u8 __always_unused bw_pct,
+ u8 __always_unused up_map)
+{
+ struct ice_pf *pf = ice_netdev_to_pf(netdev);
+
+ dev_dbg(ice_pf_to_dev(pf), "Rx TC PG Config Not Supported.\n");
+}
+
/**
* ice_dcbnl_get_pg_bwg_cfg_rx - Get CEE PG BW Rx config
* @netdev: pointer to netdev struct
@@ -559,6 +583,23 @@ ice_dcbnl_get_pg_bwg_cfg_rx(struct net_device *netdev, int __always_unused pgid,
*bw_pct = 0;
}
+/**
+ * ice_dcbnl_set_pg_bwg_cfg_rx
+ * @netdev: the corresponding netdev
+ * @pgid: corresponding TC
+ * @bw_pct: BW percentage for given TC
+ *
+ * lldpad requires this function pointer to be non-NULL to complete CEE config.
+ */
+static void
+ice_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int __always_unused pgid,
+ u8 __always_unused bw_pct)
+{
+ struct ice_pf *pf = ice_netdev_to_pf(netdev);
+
+ dev_dbg(ice_pf_to_dev(pf), "Rx BWG PG Config Not Supported.\n");
+}
+
/**
* ice_dcbnl_get_cap - Get DCBX capabilities of adapter
* @netdev: pointer to netdev struct
@@ -805,6 +846,8 @@ static const struct dcbnl_rtnl_ops dcbnl_ops = {
.getpermhwaddr = ice_dcbnl_get_perm_hw_addr,
.setpgtccfgtx = ice_dcbnl_set_pg_tc_cfg_tx,
.setpgbwgcfgtx = ice_dcbnl_set_pg_bwg_cfg_tx,
+ .setpgtccfgrx = ice_dcbnl_set_pg_tc_cfg_rx,
+ .setpgbwgcfgrx = ice_dcbnl_set_pg_bwg_cfg_rx,
.getpgtccfgtx = ice_dcbnl_get_pg_tc_cfg_tx,
.getpgbwgcfgtx = ice_dcbnl_get_pg_bwg_cfg_tx,
.getpgtccfgrx = ice_dcbnl_get_pg_tc_cfg_rx,
--
2.20.1
next prev parent reply other threads:[~2020-02-13 21:31 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-13 21:31 [Intel-wired-lan] [PATCH S39 v2 02/15] ice: update malicious driver detection event handling Tony Nguyen
2020-02-13 21:31 ` [Intel-wired-lan] [PATCH S39 v2 03/15] ice: Fix for TCAM entry management Tony Nguyen
2020-02-19 19:38 ` Bowers, AndrewX
2020-02-13 21:31 ` [Intel-wired-lan] [PATCH S39 v2 04/15] ice: Always clear the QRXFLXP_CNTXT register for VF Rx queues Tony Nguyen
2020-02-19 19:39 ` Bowers, AndrewX
2020-02-13 21:31 ` Tony Nguyen [this message]
2020-02-19 19:39 ` [Intel-wired-lan] [PATCH S39 v2 05/15] ice: Add DCBNL ops required to configure ETS in CEE for SW DCB Bowers, AndrewX
2020-02-13 21:31 ` [Intel-wired-lan] [PATCH S39 v2 06/15] ice: Report correct DCB mode Tony Nguyen
2020-02-19 19:40 ` Bowers, AndrewX
2020-02-13 21:31 ` [Intel-wired-lan] [PATCH S39 v2 07/15] ice: SW DCB, report correct max TC value Tony Nguyen
2020-02-19 19:40 ` Bowers, AndrewX
2020-02-13 21:31 ` [Intel-wired-lan] [PATCH S39 v2 08/15] ice: Support XDP UMEM wake up mechanism Tony Nguyen
2020-02-19 19:41 ` Bowers, AndrewX
2020-02-13 21:31 ` [Intel-wired-lan] [PATCH S39 v2 09/15] ice: Don't reject odd values of usecs set by user Tony Nguyen
2020-02-19 19:41 ` Bowers, AndrewX
2020-02-13 21:31 ` [Intel-wired-lan] [PATCH S39 v2 10/15] ice: Don't tell the OS that link is going down Tony Nguyen
2020-02-19 19:42 ` Bowers, AndrewX
2020-02-13 21:31 ` [Intel-wired-lan] [PATCH S39 v2 11/15] ice: increase PF reset wait timeout to 300 milliseconds Tony Nguyen
2020-02-19 19:42 ` Bowers, AndrewX
2020-02-13 21:31 ` [Intel-wired-lan] [PATCH S39 v2 12/15] ice: add backslash-n to strings Tony Nguyen
2020-02-19 19:43 ` Bowers, AndrewX
2020-02-13 21:31 ` [Intel-wired-lan] [PATCH S39 v2 13/15] ice: add additional E810 device id Tony Nguyen
2020-02-19 19:43 ` Bowers, AndrewX
2020-02-13 21:31 ` [Intel-wired-lan] [PATCH S39 v2 14/15] ice: add support for E823 devices Tony Nguyen
2020-02-19 19:45 ` Bowers, AndrewX
2020-02-13 21:31 ` [Intel-wired-lan] [PATCH S39 v2 15/15] ice: fix define for E822 backplane device Tony Nguyen
2020-02-19 19:45 ` Bowers, AndrewX
2020-02-19 19:38 ` [Intel-wired-lan] [PATCH S39 v2 02/15] ice: update malicious driver detection event handling Bowers, AndrewX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200213213129.34023-4-anthony.l.nguyen@intel.com \
--to=anthony.l.nguyen@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox