From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH S43 15/15] ice: Add more Rx errors to netdev's rx_error counter
Date: Fri, 15 May 2020 17:36:44 -0700 [thread overview]
Message-ID: <20200516003644.4658-15-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20200516003644.4658-1-anthony.l.nguyen@intel.com>
From: Brett Creeley <brett.creeley@intel.com>
Currently we are only including illegal_bytes and rx_crc_errors in the
PF netdev's rx_error counter. There are many more causes of Rx errors
that the device supports and reports via Ethtool. Accumulate all Rx
errors in the PF netdev's rx_error counter.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
---
drivers/net/ethernet/intel/ice/ice_main.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index e451120d6632..589bafb601ae 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -4357,7 +4357,13 @@ void ice_update_vsi_stats(struct ice_vsi *vsi)
if (vsi->type == ICE_VSI_PF) {
cur_ns->rx_crc_errors = pf->stats.crc_errors;
cur_ns->rx_errors = pf->stats.crc_errors +
- pf->stats.illegal_bytes;
+ pf->stats.illegal_bytes +
+ pf->stats.rx_len_errors +
+ pf->stats.rx_undersize +
+ pf->hw_csum_rx_error +
+ pf->stats.rx_jabber +
+ pf->stats.rx_fragments +
+ pf->stats.rx_oversize;
cur_ns->rx_length_errors = pf->stats.rx_len_errors;
/* record drops from the port level */
cur_ns->rx_missed_errors = pf->stats.eth.rx_discards;
--
2.20.1
next prev parent reply other threads:[~2020-05-16 0:36 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-16 0:36 [Intel-wired-lan] [PATCH S43 01/15] ice: Call ice_aq_set_mac_cfg Tony Nguyen
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 02/15] ice: print Rx MDD auto reset message before VF reset Tony Nguyen
2020-05-22 19:27 ` Bowers, AndrewX
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 03/15] ice: Fix Tx timeout when link is toggled on a VF's interface Tony Nguyen
2020-05-22 19:30 ` Bowers, AndrewX
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 04/15] ice: Check if unicast MAC exists before setting VF MAC Tony Nguyen
2020-05-22 19:30 ` Bowers, AndrewX
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 05/15] ice: check for compatibility between DDP package and firmware Tony Nguyen
2020-05-22 19:31 ` Bowers, AndrewX
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 06/15] ice: Fix bad register reads Tony Nguyen
2020-05-22 19:56 ` Bowers, AndrewX
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 07/15] ice: fix usage of incorrect variable Tony Nguyen
2020-05-22 19:58 ` Bowers, AndrewX
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 08/15] ice: cleanup unsigned loops Tony Nguyen
2020-05-22 19:58 ` Bowers, AndrewX
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 09/15] ice: fix signed vs unsigned comparisons Tony Nguyen
2020-05-22 19:58 ` Bowers, AndrewX
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 10/15] ice: remove unused macro Tony Nguyen
2020-05-22 20:06 ` Bowers, AndrewX
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 11/15] ice: set VF default LAN address Tony Nguyen
2020-05-22 20:07 ` Bowers, AndrewX
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 12/15] ice: fix MAC write command Tony Nguyen
2020-05-22 20:07 ` Bowers, AndrewX
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 13/15] ice: Fix memory leak Tony Nguyen
2020-05-22 20:08 ` Bowers, AndrewX
2020-05-16 0:36 ` [Intel-wired-lan] [PATCH S43 14/15] ice: Fix for memory leaks and modify ICE_FREE_CQ_BUFS Tony Nguyen
2020-05-22 20:09 ` Bowers, AndrewX
2020-05-16 0:36 ` Tony Nguyen [this message]
2020-05-22 20:09 ` [Intel-wired-lan] [PATCH S43 15/15] ice: Add more Rx errors to netdev's rx_error counter Bowers, AndrewX
2020-05-22 19:14 ` [Intel-wired-lan] [PATCH S43 01/15] ice: Call ice_aq_set_mac_cfg Bowers, AndrewX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200516003644.4658-15-anthony.l.nguyen@intel.com \
--to=anthony.l.nguyen@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox