Intel-Wired-Lan Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH S44 07/14] ice: Refactor Rx checksum checks
Date: Fri, 15 May 2020 17:42:19 -0700	[thread overview]
Message-ID: <20200516004226.4795-7-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20200516004226.4795-1-anthony.l.nguyen@intel.com>

From: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>

We don't need both rx_status and rx_error parameters, as the latter is
a subset of the former. Remove rx_error completely and check the right bit
in rx_status.

Rename rx_status to rx_status0, and rx_status_err1 to
rx_status1. This naming more closely reflects the specification.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_txrx_lib.c | 27 ++++++++-----------
 1 file changed, 11 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_txrx_lib.c b/drivers/net/ethernet/intel/ice/ice_txrx_lib.c
index 1ba97172d8d0..ab2031b1c635 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx_lib.c
@@ -84,17 +84,12 @@ ice_rx_csum(struct ice_ring *ring, struct sk_buff *skb,
 	    union ice_32b_rx_flex_desc *rx_desc, u8 ptype)
 {
 	struct ice_rx_ptype_decoded decoded;
-	u16 rx_error, rx_status;
-	u16 rx_stat_err1;
+	u16 rx_status0, rx_status1;
 	bool ipv4, ipv6;
 
-	rx_status = le16_to_cpu(rx_desc->wb.status_error0);
-	rx_error = rx_status & (BIT(ICE_RX_FLEX_DESC_STATUS0_XSUM_IPE_S) |
-				BIT(ICE_RX_FLEX_DESC_STATUS0_XSUM_L4E_S) |
-				BIT(ICE_RX_FLEX_DESC_STATUS0_XSUM_EIPE_S) |
-				BIT(ICE_RX_FLEX_DESC_STATUS0_XSUM_EUDPE_S));
+	rx_status0 = le16_to_cpu(rx_desc->wb.status_error0);
+	rx_status1 = le16_to_cpu(rx_desc->wb.status_error1);
 
-	rx_stat_err1 = le16_to_cpu(rx_desc->wb.status_error1);
 	decoded = ice_decode_rx_desc_ptype(ptype);
 
 	/* Start with CHECKSUM_NONE and by default csum_level = 0 */
@@ -106,7 +101,7 @@ ice_rx_csum(struct ice_ring *ring, struct sk_buff *skb,
 		return;
 
 	/* check if HW has decoded the packet and checksum */
-	if (!(rx_status & BIT(ICE_RX_FLEX_DESC_STATUS0_L3L4P_S)))
+	if (!(rx_status0 & BIT(ICE_RX_FLEX_DESC_STATUS0_L3L4P_S)))
 		return;
 
 	if (!(decoded.known && decoded.outer_ip))
@@ -117,22 +112,22 @@ ice_rx_csum(struct ice_ring *ring, struct sk_buff *skb,
 	ipv6 = (decoded.outer_ip == ICE_RX_PTYPE_OUTER_IP) &&
 	       (decoded.outer_ip_ver == ICE_RX_PTYPE_OUTER_IPV6);
 
-	if (ipv4 && (rx_error & (BIT(ICE_RX_FLEX_DESC_STATUS0_XSUM_IPE_S) |
-				 BIT(ICE_RX_FLEX_DESC_STATUS0_XSUM_EIPE_S))))
+	if (ipv4 && (rx_status0 & (BIT(ICE_RX_FLEX_DESC_STATUS0_XSUM_IPE_S) |
+				   BIT(ICE_RX_FLEX_DESC_STATUS0_XSUM_EIPE_S))))
 		goto checksum_fail;
-	else if (ipv6 && (rx_status &
-		 (BIT(ICE_RX_FLEX_DESC_STATUS0_IPV6EXADD_S))))
+
+	if (ipv6 && (rx_status0 & (BIT(ICE_RX_FLEX_DESC_STATUS0_IPV6EXADD_S))))
 		goto checksum_fail;
 
 	/* check for L4 errors and handle packets that were not able to be
 	 * checksummed due to arrival speed
 	 */
-	if (rx_error & BIT(ICE_RX_FLEX_DESC_STATUS0_XSUM_L4E_S))
+	if (rx_status0 & BIT(ICE_RX_FLEX_DESC_STATUS0_XSUM_L4E_S))
 		goto checksum_fail;
 
 	/* check for outer UDP checksum error in tunneled packets */
-	if ((rx_stat_err1 & BIT(ICE_RX_FLEX_DESC_STATUS1_NAT_S)) &&
-	    (rx_error & BIT(ICE_RX_FLEX_DESC_STATUS0_XSUM_EUDPE_S)))
+	if ((rx_status1 & BIT(ICE_RX_FLEX_DESC_STATUS1_NAT_S)) &&
+	    (rx_status0 & BIT(ICE_RX_FLEX_DESC_STATUS0_XSUM_EUDPE_S)))
 		goto checksum_fail;
 
 	/* If there is an outer header present that might contain a checksum
-- 
2.20.1


  parent reply	other threads:[~2020-05-16  0:42 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-16  0:42 [Intel-wired-lan] [PATCH S44 01/14] ice: Don't allow VLAN stripping change when pvid set Tony Nguyen
2020-05-16  0:42 ` [Intel-wired-lan] [PATCH S44 02/14] ice: Handle critical FW error during admin queue initialization Tony Nguyen
2020-05-26 20:22   ` Bowers, AndrewX
2020-05-16  0:42 ` [Intel-wired-lan] [PATCH S44 03/14] ice: Change number of XDP TxQ to 0 when destroying rings Tony Nguyen
2020-05-26 20:23   ` Bowers, AndrewX
2020-05-16  0:42 ` [Intel-wired-lan] [PATCH S44 04/14] ice: Add XDP Tx to VSI ring stats Tony Nguyen
2020-05-26 20:23   ` Bowers, AndrewX
2020-05-16  0:42 ` [Intel-wired-lan] [PATCH S44 05/14] ice: Change number of XDP Tx queues to match number of Rx queues Tony Nguyen
2020-05-26 20:24   ` Bowers, AndrewX
2020-05-16  0:42 ` [Intel-wired-lan] [PATCH S44 06/14] ice: avoid undefined behavior Tony Nguyen
2020-05-26 20:24   ` Bowers, AndrewX
2020-05-16  0:42 ` Tony Nguyen [this message]
2020-05-26 20:24   ` [Intel-wired-lan] [PATCH S44 07/14] ice: Refactor Rx checksum checks Bowers, AndrewX
2020-05-16  0:42 ` [Intel-wired-lan] [PATCH S44 08/14] ice: Check UMEM FQ size when allocating bufs Tony Nguyen
2020-05-26 20:25   ` Bowers, AndrewX
2020-05-16  0:42 ` [Intel-wired-lan] [PATCH S44 09/14] ice: Refactor ice_setup_rx_ctx Tony Nguyen
2020-05-26 20:25   ` Bowers, AndrewX
2020-05-16  0:42 ` [Intel-wired-lan] [PATCH S44 10/14] ice: Poll for reset completion when DDP load fails Tony Nguyen
2020-05-26 20:25   ` Bowers, AndrewX
2020-05-16  0:42 ` [Intel-wired-lan] [PATCH S44 11/14] ice: cleanup VSI context initialization Tony Nguyen
2020-05-26 20:26   ` Bowers, AndrewX
2020-05-16  0:42 ` [Intel-wired-lan] [PATCH S44 12/14] ice: fix potential double free in probe unrolling Tony Nguyen
2020-05-26 20:26   ` Bowers, AndrewX
2020-05-16  0:42 ` [Intel-wired-lan] [PATCH S44 13/14] ice: fix kernel BUG if register_netdev fails Tony Nguyen
2020-05-26 20:26   ` Bowers, AndrewX
2020-05-16  0:42 ` [Intel-wired-lan] [PATCH S44 14/14] ice: Declare functions static Tony Nguyen
2020-05-26 20:26   ` Bowers, AndrewX
2020-05-26 20:22 ` [Intel-wired-lan] [PATCH S44 01/14] ice: Don't allow VLAN stripping change when pvid set Bowers, AndrewX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200516004226.4795-7-anthony.l.nguyen@intel.com \
    --to=anthony.l.nguyen@intel.com \
    --cc=intel-wired-lan@osuosl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox