From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH S45 04/15] ice: Separate VF VSI initialization/creation from reset flow
Date: Fri, 15 May 2020 17:51:10 -0700 [thread overview]
Message-ID: <20200516005121.4963-4-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20200516005121.4963-1-anthony.l.nguyen@intel.com>
From: Brett Creeley <brett.creeley@intel.com>
Currently the same flow is used for VF VSI initialization/creation and VF
VSI reset. This makes the initialization/creation flow unnecessarily
complicated. Fix this by separating the initialization/creation of the
VF VSI from the reset flow.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
---
.../net/ethernet/intel/ice/ice_virtchnl_pf.c | 110 +++++++++++++++++-
1 file changed, 106 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index 18fe4cfe4443..5b9f01f1f65b 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -1375,6 +1375,99 @@ static void ice_vc_notify_vf_reset(struct ice_vf *vf)
NULL);
}
+/**
+ * ice_init_vf_vsi_res - initialize/setup VF VSI resources
+ * @vf: VF to initialize/setup the VSI for
+ *
+ * This function creates a VSI for the VF, adds a VLAN 0 filter, and sets up the
+ * VF VSI's broadcast filter and is only used during initial VF creation.
+ */
+static int ice_init_vf_vsi_res(struct ice_vf *vf)
+{
+ struct ice_pf *pf = vf->pf;
+ u8 broadcast[ETH_ALEN];
+ enum ice_status status;
+ struct ice_vsi *vsi;
+ struct device *dev;
+ int err;
+
+ vf->first_vector_idx = ice_calc_vf_first_vector_idx(pf, vf);
+
+ dev = ice_pf_to_dev(pf);
+ vsi = ice_vf_vsi_setup(pf, pf->hw.port_info, vf->vf_id);
+ if (!vsi) {
+ dev_err(dev, "Failed to create VF VSI\n");
+ return -ENOMEM;
+ }
+
+ vf->lan_vsi_idx = vsi->idx;
+ vf->lan_vsi_num = vsi->vsi_num;
+
+ err = ice_vsi_add_vlan(vsi, 0, ICE_FWD_TO_VSI);
+ if (err) {
+ dev_warn(dev, "Failed to add VLAN 0 filter for VF %d\n",
+ vf->vf_id);
+ goto release_vsi;
+ }
+
+ eth_broadcast_addr(broadcast);
+ status = ice_fltr_add_mac(vsi, broadcast, ICE_FWD_TO_VSI);
+ if (status) {
+ dev_err(dev, "Failed to add broadcast MAC filter for VF %d, status %s\n",
+ vf->vf_id, ice_stat_str(status));
+ err = ice_status_to_errno(status);
+ goto release_vsi;
+ }
+
+ vf->num_mac = 1;
+
+ return 0;
+
+release_vsi:
+ ice_vsi_release(vsi);
+ return err;
+}
+
+/**
+ * ice_start_vfs - start VFs so they are ready to be used by SR-IOV
+ * @pf: PF the VFs are associated with
+ */
+static int ice_start_vfs(struct ice_pf *pf)
+{
+ struct ice_hw *hw = &pf->hw;
+ int retval, i;
+
+ ice_for_each_vf(pf, i) {
+ struct ice_vf *vf = &pf->vf[i];
+
+ ice_clear_vf_reset_trigger(vf);
+
+ retval = ice_init_vf_vsi_res(vf);
+ if (retval) {
+ dev_err(ice_pf_to_dev(pf), "Failed to initialize VSI resources for VF %d, error %d\n",
+ vf->vf_id, retval);
+ goto teardown;
+ }
+
+ set_bit(ICE_VF_STATE_INIT, vf->vf_states);
+ ice_ena_vf_mappings(vf);
+ wr32(hw, VFGEN_RSTAT(vf->vf_id), VIRTCHNL_VFR_VFACTIVE);
+ }
+
+ ice_flush(hw);
+ return 0;
+
+teardown:
+ for (i = i - 1; i >= 0; i--) {
+ struct ice_vf *vf = &pf->vf[i];
+
+ ice_dis_vf_mappings(vf);
+ ice_vsi_release(pf->vsi[vf->lan_vsi_idx]);
+ }
+
+ return retval;
+}
+
/**
* ice_alloc_vfs - Allocate and set up VFs resources
* @pf: pointer to the PF structure
@@ -1407,6 +1500,13 @@ static int ice_alloc_vfs(struct ice_pf *pf, u16 num_alloc_vfs)
pf->vf = vfs;
pf->num_alloc_vfs = num_alloc_vfs;
+ if (ice_set_per_vf_res(pf)) {
+ dev_err(dev, "Not enough resources for %d VFs, try with fewer number of VFs\n",
+ num_alloc_vfs);
+ ret = -ENOSPC;
+ goto err_unroll_sriov;
+ }
+
/* apply default profile */
ice_for_each_vf(pf, i) {
vfs[i].pf = pf;
@@ -1416,15 +1516,17 @@ static int ice_alloc_vfs(struct ice_pf *pf, u16 num_alloc_vfs)
/* assign default capabilities */
set_bit(ICE_VIRTCHNL_VF_CAP_L2, &vfs[i].vf_caps);
vfs[i].spoofchk = true;
+ vfs[i].num_vf_qs = pf->num_qps_per_vf;
}
- /* VF resources get allocated with initialization */
- if (!ice_config_res_vfs(pf)) {
- ret = -EIO;
+ if (ice_start_vfs(pf)) {
+ dev_err(dev, "Failed to start VF(s)\n");
+ ret = -EAGAIN;
goto err_unroll_sriov;
}
- return ret;
+ clear_bit(__ICE_VF_DIS, pf->state);
+ return 0;
err_unroll_sriov:
pf->vf = NULL;
--
2.20.1
next prev parent reply other threads:[~2020-05-16 0:51 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-16 0:51 [Intel-wired-lan] [PATCH S45 01/15] ice: Refactor ice_ena_vf_mappings to split MSIX and queue mappings Tony Nguyen
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 02/15] ice: Simplify ice_sriov_configure Tony Nguyen
2020-05-28 21:39 ` Bowers, AndrewX
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 03/15] ice: Add helper function for clearing VPGEN_VFRTRIG Tony Nguyen
2020-05-28 21:39 ` Bowers, AndrewX
2020-05-16 0:51 ` Tony Nguyen [this message]
2020-05-28 21:40 ` [Intel-wired-lan] [PATCH S45 04/15] ice: Separate VF VSI initialization/creation from reset flow Bowers, AndrewX
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 05/15] ice: Renaming and simplification in VF init path Tony Nguyen
2020-05-28 21:40 ` Bowers, AndrewX
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 06/15] ice: Add function to set trust mode bit on reset Tony Nguyen
2020-05-28 21:41 ` Bowers, AndrewX
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 07/15] ice: Add functions to rebuild host VLAN/MAC config for a VF Tony Nguyen
2020-05-28 21:41 ` Bowers, AndrewX
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 08/15] ice: remove VM/VF disable command on CORER/GLOBR reset Tony Nguyen
2020-05-28 21:41 ` Bowers, AndrewX
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 09/15] ice: Refactor VF reset Tony Nguyen
2020-05-28 21:42 ` Bowers, AndrewX
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 10/15] ice: Refactor VF VSI release and setup functions Tony Nguyen
2020-05-28 21:42 ` Bowers, AndrewX
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 11/15] ice: allow host to clear administratively set VF MAC Tony Nguyen
2020-05-28 21:43 ` Bowers, AndrewX
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 12/15] ice: support adding 16 unicast/multicast filter on untrusted VF Tony Nguyen
2020-05-28 21:43 ` Bowers, AndrewX
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 13/15] ice: Fix transmit for all software offloaded VLANs Tony Nguyen
2020-05-28 21:44 ` Bowers, AndrewX
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 14/15] ice: Increase timeout after PFR Tony Nguyen
2020-05-28 21:44 ` Bowers, AndrewX
2020-05-16 0:51 ` [Intel-wired-lan] [PATCH S45 15/15] ice: Update ICE_PHY_TYPE_HIGH_MAX_INDEX value Tony Nguyen
2020-05-28 21:44 ` Bowers, AndrewX
2020-05-28 21:38 ` [Intel-wired-lan] [PATCH S45 01/15] ice: Refactor ice_ena_vf_mappings to split MSIX and queue mappings Bowers, AndrewX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200516005121.4963-4-anthony.l.nguyen@intel.com \
--to=anthony.l.nguyen@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox