From: Alice Michael <alice.michael@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [next-queue,v3, 00/14]
Date: Mon, 22 Jun 2020 06:20:53 -0700 [thread overview]
Message-ID: <20200622132107.50889-1-alice.michael@intel.com> (raw)
This series introduces both the Intel Ethernet Common Module and the
Intel Data Plane Function. The patches also incorporate extended
features and functionality added in the virtchnl.h file.
The format of the series flow is to add the data set, then introduce
function stubs and finally introduce pieces in large cohesive subjects or
functionality. This is to allow for more in depth understanding and review
of the bigger picture as the series is reviewed.
Currently this is common layer (iecm) is initially only being used by
only the idpf driver (PF driver for SmartNIC). However, the plan is
to eventually switch our iavf driver along with future drivers to use
this common module. The hope is to better enable code sharing going
forward as well as support other developers writing drivers for our
hardware
V3 -- Addresses comments from the original series. This inncludes removing
the iecm_ctlq_err in iecm_ctlq_api.h, the private flags and duplicated
checks, and cleaning up the clamps in iecm_ethtool.c. We also added
the supported_coalesce_params flags in iecm_ethtool.c. Finally, we
got the headers cleaned up and addressed mismatching types from calls
to cpu_to_le to match the types (this fixes C=2 W=1 errors that were
reported).
Alan Brady (1):
idpf: Introduce idpf driver
Alice Michael (14):
virtchnl: Extend AVF ops
iecm: Add framework set of header files
iecm: Add TX/RX header files
iecm: Common module introduction and function stubs
iecm: Add basic netdevice functionality
iecm: Implement mailbox functionality
iecm: Implement virtchnl commands
iecm: Implement vector allocation
iecm: Init and allocate vport
iecm: Deinit vport
iecm: Add splitq TX/RX
iecm: Add singleq TX/RX
iecm: Add ethtool
iecm: Add iecm to the kernel build system
.../networking/device_drivers/intel/idpf.rst | 47 +
.../networking/device_drivers/intel/iecm.rst | 93 +
MAINTAINERS | 3 +
drivers/net/ethernet/intel/Kconfig | 15 +
drivers/net/ethernet/intel/Makefile | 2 +
drivers/net/ethernet/intel/idpf/Makefile | 12 +
drivers/net/ethernet/intel/idpf/idpf_dev.h | 17 +
drivers/net/ethernet/intel/idpf/idpf_devids.h | 10 +
drivers/net/ethernet/intel/idpf/idpf_main.c | 136 +
drivers/net/ethernet/intel/idpf/idpf_reg.c | 152 +
drivers/net/ethernet/intel/iecm/Makefile | 19 +
.../net/ethernet/intel/iecm/iecm_controlq.c | 669 +++
.../ethernet/intel/iecm/iecm_controlq_setup.c | 177 +
.../net/ethernet/intel/iecm/iecm_ethtool.c | 1064 +++++
drivers/net/ethernet/intel/iecm/iecm_lib.c | 1093 +++++
drivers/net/ethernet/intel/iecm/iecm_main.c | 50 +
drivers/net/ethernet/intel/iecm/iecm_osdep.c | 28 +
.../ethernet/intel/iecm/iecm_singleq_txrx.c | 892 ++++
drivers/net/ethernet/intel/iecm/iecm_txrx.c | 3961 +++++++++++++++++
.../net/ethernet/intel/iecm/iecm_virtchnl.c | 2262 ++++++++++
include/linux/net/intel/iecm.h | 433 ++
include/linux/net/intel/iecm_alloc.h | 29 +
include/linux/net/intel/iecm_controlq.h | 95 +
include/linux/net/intel/iecm_controlq_api.h | 188 +
include/linux/net/intel/iecm_lan_pf_regs.h | 120 +
include/linux/net/intel/iecm_lan_txrx.h | 636 +++
include/linux/net/intel/iecm_osdep.h | 24 +
include/linux/net/intel/iecm_txrx.h | 581 +++
include/linux/net/intel/iecm_type.h | 47 +
29 files changed, 12855 insertions(+)
create mode 100644 Documentation/networking/device_drivers/intel/idpf.rst
create mode 100644 Documentation/networking/device_drivers/intel/iecm.rst
create mode 100644 drivers/net/ethernet/intel/idpf/Makefile
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_dev.h
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_devids.h
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_main.c
create mode 100644 drivers/net/ethernet/intel/idpf/idpf_reg.c
create mode 100644 drivers/net/ethernet/intel/iecm/Makefile
create mode 100644 drivers/net/ethernet/intel/iecm/iecm_controlq.c
create mode 100644 drivers/net/ethernet/intel/iecm/iecm_controlq_setup.c
create mode 100644 drivers/net/ethernet/intel/iecm/iecm_ethtool.c
create mode 100644 drivers/net/ethernet/intel/iecm/iecm_lib.c
create mode 100644 drivers/net/ethernet/intel/iecm/iecm_main.c
create mode 100644 drivers/net/ethernet/intel/iecm/iecm_osdep.c
create mode 100644 drivers/net/ethernet/intel/iecm/iecm_singleq_txrx.c
create mode 100644 drivers/net/ethernet/intel/iecm/iecm_txrx.c
create mode 100644 drivers/net/ethernet/intel/iecm/iecm_virtchnl.c
create mode 100644 include/linux/net/intel/iecm.h
create mode 100644 include/linux/net/intel/iecm_alloc.h
create mode 100644 include/linux/net/intel/iecm_controlq.h
create mode 100644 include/linux/net/intel/iecm_controlq_api.h
create mode 100644 include/linux/net/intel/iecm_lan_pf_regs.h
create mode 100644 include/linux/net/intel/iecm_lan_txrx.h
create mode 100644 include/linux/net/intel/iecm_osdep.h
create mode 100644 include/linux/net/intel/iecm_txrx.h
create mode 100644 include/linux/net/intel/iecm_type.h
--
2.21.0
next reply other threads:[~2020-06-22 13:20 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-22 13:20 Alice Michael [this message]
2020-06-22 13:20 ` [Intel-wired-lan] [next-queue, v3, 01/14] iecm: Add framework set of header files Alice Michael
2020-06-22 13:20 ` [Intel-wired-lan] [next-queue, v3, 02/14] iecm: Add TX/RX " Alice Michael
2020-06-22 13:20 ` [Intel-wired-lan] [next-queue, v3, 03/14] iecm: Common module introduction and function stubs Alice Michael
2020-06-22 13:20 ` [Intel-wired-lan] [next-queue, v3, 04/14] iecm: Add basic netdevice functionality Alice Michael
2020-06-22 13:20 ` [Intel-wired-lan] [next-queue, v3, 05/14] iecm: Implement mailbox functionality Alice Michael
2020-06-22 13:20 ` [Intel-wired-lan] [next-queue, v3, 06/14] iecm: Implement virtchnl commands Alice Michael
2020-06-22 13:21 ` [Intel-wired-lan] [next-queue, v3, 07/14] iecm: Implement vector allocation Alice Michael
2020-06-22 13:21 ` [Intel-wired-lan] [next-queue, v3, 08/14] iecm: Init and allocate vport Alice Michael
2020-06-22 13:21 ` [Intel-wired-lan] [next-queue,v3, 09/14] iecm: Deinit vport Alice Michael
2020-06-22 13:21 ` [Intel-wired-lan] [next-queue,v3, 10/14] iecm: Add splitq TX/RX Alice Michael
2020-06-22 13:21 ` [Intel-wired-lan] [next-queue,v3, 11/14] iecm: Add singleq TX/RX Alice Michael
2020-06-22 13:21 ` [Intel-wired-lan] [next-queue,v3, 12/14] iecm: Add ethtool Alice Michael
2020-06-22 13:21 ` [Intel-wired-lan] [next-queue, v3, 13/14] iecm: Add iecm to the kernel build system Alice Michael
2020-06-22 13:21 ` [Intel-wired-lan] [next-queue, v3, 14/14] idpf: Introduce idpf driver Alice Michael
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200622132107.50889-1-alice.michael@intel.com \
--to=alice.michael@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox