From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Assmann Date: Mon, 30 Nov 2020 14:12:57 +0100 Subject: [Intel-wired-lan] [PATCH] i40e: acquire VSI pointer only after VF is initialized Message-ID: <20201130131257.28856-1-sassmann@kpanic.de> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: intel-wired-lan@osuosl.org List-ID: This change simplifies the VF initialization check and also minimizes the delay between acquiring the VSI pointer and using it. As known by the commit being fixed, there is a risk of the VSI pointer getting changed. Therefore minimize the delay between getting and using the pointer. Fixes: 9889707b06ac ("i40e: Fix crash caused by stress setting of VF MAC addresses") Signed-off-by: Stefan Assmann --- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 729c4f0d5ac5..bf6034c3a6ea 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -4046,20 +4046,16 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac) goto error_param; vf = &pf->vf[vf_id]; - vsi = pf->vsi[vf->lan_vsi_idx]; /* When the VF is resetting wait until it is done. * It can take up to 200 milliseconds, * but wait for up to 300 milliseconds to be safe. - * If the VF is indeed in reset, the vsi pointer has - * to show on the newly loaded vsi under pf->vsi[id]. + * Acquire the vsi pointer only after the VF has been + * properly initialized. */ for (i = 0; i < 15; i++) { - if (test_bit(I40E_VF_STATE_INIT, &vf->vf_states)) { - if (i > 0) - vsi = pf->vsi[vf->lan_vsi_idx]; + if (test_bit(I40E_VF_STATE_INIT, &vf->vf_states)) break; - } msleep(20); } if (!test_bit(I40E_VF_STATE_INIT, &vf->vf_states)) { @@ -4068,6 +4064,7 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac) ret = -EAGAIN; goto error_param; } + vsi = pf->vsi[vf->lan_vsi_idx]; if (is_multicast_ether_addr(mac)) { dev_err(&pf->pdev->dev, -- 2.28.0