From: Jithu Joseph <jithu.joseph@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH v5 7/9] igc: Replace IGC_TX_FLAGS_XDP flag by an enum
Date: Thu, 25 Feb 2021 16:23:06 -0800 [thread overview]
Message-ID: <20210226002308.2348-8-jithu.joseph@intel.com> (raw)
In-Reply-To: <20210226002308.2348-1-jithu.joseph@intel.com>
From: Andre Guedes <andre.guedes@intel.com>
Up to this point, tx buffers are associated with either a skb or a xdpf,
and the IGC_TX_FLAGS_XDP flag was enough to distinguish between these
two case. However, with upcoming patches that will add AF_XDP zero-copy
support, a third case will be introduced so this flag-based approach
won't fit well.
In preparation to land AF_XDP zero-copy support, replace the
IGC_TX_FLAGS_XDP flag by an enum which will be extended once zero-copy
support is introduced to the driver.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
---
drivers/net/ethernet/intel/igc/igc.h | 8 +++++--
drivers/net/ethernet/intel/igc/igc_main.c | 27 ++++++++++++++++++-----
2 files changed, 28 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index 2472a364874c..f0a8909c0d44 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -390,8 +390,6 @@ enum igc_tx_flags {
/* olinfo flags */
IGC_TX_FLAGS_IPV4 = 0x10,
IGC_TX_FLAGS_CSUM = 0x20,
-
- IGC_TX_FLAGS_XDP = 0x100,
};
enum igc_boards {
@@ -408,12 +406,18 @@ enum igc_boards {
#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IGC_MAX_DATA_PER_TXD)
#define DESC_NEEDED (MAX_SKB_FRAGS + 4)
+enum igc_tx_buffer_type {
+ IGC_TX_BUFFER_TYPE_SKB,
+ IGC_TX_BUFFER_TYPE_XDP,
+};
+
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer
*/
struct igc_tx_buffer {
union igc_adv_tx_desc *next_to_watch;
unsigned long time_stamp;
+ enum igc_tx_buffer_type type;
union {
struct sk_buff *skb;
struct xdp_frame *xdpf;
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 6bd0a5d6328b..395da157d1e8 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -191,10 +191,18 @@ static void igc_clean_tx_ring(struct igc_ring *tx_ring)
while (i != tx_ring->next_to_use) {
union igc_adv_tx_desc *eop_desc, *tx_desc;
- if (tx_buffer->tx_flags & IGC_TX_FLAGS_XDP)
+ switch (tx_buffer->type) {
+ case IGC_TX_BUFFER_TYPE_XDP:
xdp_return_frame(tx_buffer->xdpf);
- else
+ break;
+ case IGC_TX_BUFFER_TYPE_SKB:
dev_kfree_skb_any(tx_buffer->skb);
+ break;
+ default:
+ netdev_warn_once(tx_ring->netdev,
+ "Unknown tx buffer type\n");
+ break;
+ }
igc_unmap_tx_buffer(tx_ring->dev, tx_buffer);
@@ -1361,6 +1369,7 @@ static netdev_tx_t igc_xmit_frame_ring(struct sk_buff *skb,
/* record the location of the first descriptor for this packet */
first = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
+ first->type = IGC_TX_BUFFER_TYPE_SKB;
first->skb = skb;
first->bytecount = skb->len;
first->gso_segs = 1;
@@ -1944,8 +1953,8 @@ static int igc_xdp_init_tx_buffer(struct igc_tx_buffer *buffer,
return -ENOMEM;
}
+ buffer->type = IGC_TX_BUFFER_TYPE_XDP;
buffer->xdpf = xdpf;
- buffer->tx_flags = IGC_TX_FLAGS_XDP;
buffer->protocol = 0;
buffer->bytecount = xdpf->len;
buffer->gso_segs = 1;
@@ -2309,10 +2318,18 @@ static bool igc_clean_tx_irq(struct igc_q_vector *q_vector, int napi_budget)
total_bytes += tx_buffer->bytecount;
total_packets += tx_buffer->gso_segs;
- if (tx_buffer->tx_flags & IGC_TX_FLAGS_XDP)
+ switch (tx_buffer->type) {
+ case IGC_TX_BUFFER_TYPE_XDP:
xdp_return_frame(tx_buffer->xdpf);
- else
+ break;
+ case IGC_TX_BUFFER_TYPE_SKB:
napi_consume_skb(tx_buffer->skb, napi_budget);
+ break;
+ default:
+ netdev_warn_once(tx_ring->netdev,
+ "Unknown tx buffer type\n");
+ break;
+ }
igc_unmap_tx_buffer(tx_ring->dev, tx_buffer);
--
2.17.1
next prev parent reply other threads:[~2021-02-26 0:23 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-26 0:22 [Intel-wired-lan] [PATCH v5 0/9] igc: Add support for AF_XDP zero-copy Jithu Joseph
2021-02-26 0:23 ` [Intel-wired-lan] [PATCH v5 1/9] igc: Move igc_xdp_is_enabled() Jithu Joseph
2021-03-18 10:17 ` Dvora Fuxbrumer
2021-02-26 0:23 ` [Intel-wired-lan] [PATCH v5 2/9] igc: Refactor __igc_xdp_run_prog() Jithu Joseph
2021-04-08 10:08 ` Dvora Fuxbrumer
2021-02-26 0:23 ` [Intel-wired-lan] [PATCH v5 3/9] igc: Refactor igc_clean_rx_ring() Jithu Joseph
2021-04-08 10:09 ` Dvora Fuxbrumer
2021-02-26 0:23 ` [Intel-wired-lan] [PATCH v5 4/9] igc: Refactor XDP rxq info registration Jithu Joseph
2021-04-08 10:10 ` Dvora Fuxbrumer
2021-02-26 0:23 ` [Intel-wired-lan] [PATCH v5 5/9] igc: Introduce TX/RX stats helpers Jithu Joseph
2021-04-08 10:11 ` Dvora Fuxbrumer
2021-02-26 0:23 ` [Intel-wired-lan] [PATCH v5 6/9] igc: Introduce igc_unmap_tx_buffer() helper Jithu Joseph
2021-04-08 10:11 ` Dvora Fuxbrumer
2021-02-26 0:23 ` Jithu Joseph [this message]
2021-04-08 10:12 ` [Intel-wired-lan] [PATCH v5 7/9] igc: Replace IGC_TX_FLAGS_XDP flag by an enum Dvora Fuxbrumer
2021-02-26 0:23 ` [Intel-wired-lan] [PATCH v5 8/9] igc: Enable RX via AF_XDP zero-copy Jithu Joseph
2021-04-08 10:13 ` Dvora Fuxbrumer
2021-02-26 0:23 ` [Intel-wired-lan] [PATCH v5 9/9] igc: Enable TX " Jithu Joseph
2021-04-08 10:13 ` Dvora Fuxbrumer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210226002308.2348-8-jithu.joseph@intel.com \
--to=jithu.joseph@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox