[Intel-wired-lan] [PATCH intel-net] i40e: fix broken XDP support

[Magnus Karlsson <magnus.karlsson@gmail.com>]

From: Magnus Karlsson <magnus.karlsson@intel.com>

Commit 12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c") broke
XDP support in the i40e driver. That commit was fixing a sparse error
in the code by introducing a new variable xdp_res instead of
overloading this into the skb pointer. The problem is that the code
later uses the skb pointer in if statements and these where not
extended to also test for the new xdp_res variable. Fix this by adding
the correct tests for xdp_res in these places.

The skb pointer was used to store the result of the XDP program by
overloading the results in the errror pointer
ERR_PTR(-result). Therefore, the allocation failure test that used to
only test for !skb now need to be extended to also consider !xdp_res.

i40e_cleanup_headers() had a check that based on the skb value being
an error pointer, i.e. a result from the XDP program != XDP_PASS, and
if so start to process a new packet immediately, instead of populating
skb fields and sending the skb to the stack. This check is not needed
anymore, since we have added an explicit test for xdp_res being set
and if so just do continue to pick the next packet from the NIC.

v1 -> v2:

* Improved commit message.

* Restored the xdp_res = 0 initialization to its original place
  outside the per-packet loop. The original reason to move it inside
  the loop was that it was only initialized inside the loop code if
  skb was not set. But as skb can only be non-null if we have packets
  consisting of multiple frames (skb is set for all frames except the
  last one in a packet) and when this is true XDP cannot be active, so
  this does not matter. xdp_res == 0 is the same as I40E_XDP_PASS
  which is the default action if XDP is not active and it is then true
  for every single packet in this case.

Fixes: 12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c")
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 06b4271219b1..70b515049540 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1961,10 +1961,6 @@ static bool i40e_cleanup_headers(struct i40e_ring *rx_ring, struct sk_buff *skb,
 				 union i40e_rx_desc *rx_desc)
 
 {
-	/* XDP packets use error pointer so abort at this point */
-	if (IS_ERR(skb))
-		return true;
-
 	/* ERR_MASK will only have valid bits if EOP set, and
 	 * what we are doing here is actually checking
 	 * I40E_RX_DESC_ERROR_RXE_SHIFT, since it is the zeroth bit in
@@ -2534,7 +2530,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 		}
 
 		/* exit if we failed to retrieve a buffer */
-		if (!skb) {
+		if (!xdp_res && !skb) {
 			rx_ring->rx_stats.alloc_buff_failed++;
 			rx_buffer->pagecnt_bias++;
 			break;
@@ -2547,7 +2543,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 		if (i40e_is_non_eop(rx_ring, rx_desc))
 			continue;
 
-		if (i40e_cleanup_headers(rx_ring, skb, rx_desc)) {
+		if (xdp_res || i40e_cleanup_headers(rx_ring, skb, rx_desc)) {
 			skb = NULL;
 			continue;
 		}

base-commit: bbd6f0a948139970f4a615dff189d9a503681a39
-- 
2.29.0