From: Brett Creeley <brett.creeley@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH] ice: Fix failure to re-add LAN/RDMA Tx queues
Date: Mon, 28 Jun 2021 10:53:45 -0700 [thread overview]
Message-ID: <20210628175345.50764-1-brett.creeley@intel.com> (raw)
Currently if the VSI is rebuilt/removed and the RDMA PF driver is active
the RDMA Tx queue scheduler node configuration will not be cleaned up.
This will cause the rebuild/re-add of the VSI to fail due to the
software structures not being correctly cleaned up for the VSI index.
Fix this by always calling ice_rm_vsi_rdma_cfg() for all VSI. If there
are no RDMA scheduler nodes created, then there is no harm in calling
ice_rm_vsi_rdma_cfg(). This change applies to all VSI types, so if
RDMA support is added for other VSI types they will also get this
change.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
---
drivers/net/ethernet/intel/ice/ice_lib.c | 9 +++++++++
drivers/net/ethernet/intel/ice/ice_sched.c | 13 +++++++++++++
drivers/net/ethernet/intel/ice/ice_sched.h | 1 +
3 files changed, 23 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index dde9802c6c72..7bacc0af60d3 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -2842,6 +2842,7 @@ void ice_napi_del(struct ice_vsi *vsi)
int ice_vsi_release(struct ice_vsi *vsi)
{
struct ice_pf *pf;
+ int err;
if (!vsi->back)
return -ENODEV;
@@ -2912,6 +2913,10 @@ int ice_vsi_release(struct ice_vsi *vsi)
ice_fltr_remove_all(vsi);
ice_rm_vsi_lan_cfg(vsi->port_info, vsi->idx);
+ err = ice_rm_vsi_rdma_cfg(vsi->port_info, vsi->idx);
+ if (err)
+ dev_err(ice_pf_to_dev(vsi->back), "Failed to remove RDMA scheduler config for VSI %u, err %d\n",
+ vsi->vsi_num, err);
ice_vsi_delete(vsi);
ice_vsi_free_q_vectors(vsi);
@@ -3092,6 +3097,10 @@ int ice_vsi_rebuild(struct ice_vsi *vsi, bool init_vsi)
prev_num_q_vectors = ice_vsi_rebuild_get_coalesce(vsi, coalesce);
ice_rm_vsi_lan_cfg(vsi->port_info, vsi->idx);
+ ret = ice_rm_vsi_rdma_cfg(vsi->port_info, vsi->idx);
+ if (ret)
+ dev_err(ice_pf_to_dev(vsi->back), "Failed to remove RDMA scheduler config for VSI %u, err %d\n",
+ vsi->vsi_num, ret);
ice_vsi_free_q_vectors(vsi);
/* SR-IOV determines needed MSIX resources all at once instead of per
diff --git a/drivers/net/ethernet/intel/ice/ice_sched.c b/drivers/net/ethernet/intel/ice/ice_sched.c
index a17e24e54cf3..aa19c470edce 100644
--- a/drivers/net/ethernet/intel/ice/ice_sched.c
+++ b/drivers/net/ethernet/intel/ice/ice_sched.c
@@ -2070,6 +2070,19 @@ enum ice_status ice_rm_vsi_lan_cfg(struct ice_port_info *pi, u16 vsi_handle)
return ice_sched_rm_vsi_cfg(pi, vsi_handle, ICE_SCHED_NODE_OWNER_LAN);
}
+/**
+ * ice_rm_vsi_rdma_cfg - remove VSI and its RDMA children nodes
+ * @pi: port information structure
+ * @vsi_handle: software VSI handle
+ *
+ * This function clears the VSI and its RDMA children nodes from scheduler tree
+ * for all TCs.
+ */
+enum ice_status ice_rm_vsi_rdma_cfg(struct ice_port_info *pi, u16 vsi_handle)
+{
+ return ice_sched_rm_vsi_cfg(pi, vsi_handle, ICE_SCHED_NODE_OWNER_RDMA);
+}
+
/**
* ice_get_agg_info - get the aggregator ID
* @hw: pointer to the hardware structure
diff --git a/drivers/net/ethernet/intel/ice/ice_sched.h b/drivers/net/ethernet/intel/ice/ice_sched.h
index 9beef8f0ec76..fdf7a5882f07 100644
--- a/drivers/net/ethernet/intel/ice/ice_sched.h
+++ b/drivers/net/ethernet/intel/ice/ice_sched.h
@@ -89,6 +89,7 @@ enum ice_status
ice_sched_cfg_vsi(struct ice_port_info *pi, u16 vsi_handle, u8 tc, u16 maxqs,
u8 owner, bool enable);
enum ice_status ice_rm_vsi_lan_cfg(struct ice_port_info *pi, u16 vsi_handle);
+enum ice_status ice_rm_vsi_rdma_cfg(struct ice_port_info *pi, u16 vsi_handle);
/* Tx scheduler rate limiter functions */
enum ice_status
--
2.26.3
next reply other threads:[~2021-06-28 17:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-28 17:53 Brett Creeley [this message]
2021-09-29 21:22 ` [Intel-wired-lan] [PATCH] ice: Fix failure to re-add LAN/RDMA Tx queues Jurkowski, Jerzy Wiktor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210628175345.50764-1-brett.creeley@intel.com \
--to=brett.creeley@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox