From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Maloszewski Date: Fri, 20 May 2022 18:07:03 +0000 Subject: [Intel-wired-lan] [PATCH net v2] i40e: Fix interface init with MSI interrupts (no MSI-X) Message-ID: <20220520180703.680212-1-michal.maloszewski@intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: intel-wired-lan@osuosl.org List-ID: Fix the inability to bring an interface up on a setup with only MSI interrupts enabled (no MSI-X). Solution is to add a default number of QPs = 1. This is enough, since without MSI-X support driver enables only a basic feature set. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Signed-off-by: Dawid Lukwinski Signed-off-by: Michal Maloszewski --- v2: Moving the comment in right place --- drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 8572993972ef..6c41ee966570 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -1835,11 +1835,15 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi, * non-zero req_queue_pairs says that user requested a new * queue count via ethtool's set_channels, so use this * value for queues distribution across traffic classes + * We need at least one queue pair for the interface + * to be usable as we see in else statement. */ if (vsi->req_queue_pairs > 0) vsi->num_queue_pairs = vsi->req_queue_pairs; else if (pf->flags & I40E_FLAG_MSIX_ENABLED) vsi->num_queue_pairs = pf->num_lan_msix; + else + vsi->num_queue_pairs = 1; } /* Number of queues per enabled TC */ -- 2.27.0