From: Mateusz Palczewski <mateusz.palczewski@intel.com>
To: intel-wired-lan@lists.osuosl.org
Cc: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Subject: [Intel-wired-lan] [PATCH net v1] i40e: Fix tunnel checksum offload with fragmented traffic
Date: Wed, 27 Jul 2022 11:19:40 +0200 [thread overview]
Message-ID: <20220727091940.10902-1-mateusz.palczewski@intel.com> (raw)
From: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Fix checksum offload on VXLAN tunnels.
In case, when mpls protocol is not used, set l4 header to transport
header of skb. This fixes case, when user tries to offload checksums
of VXLAN tunneled traffic.
Steps for reproduction (requires link partner with tunnels):
ip l s enp130s0f0 up
ip a f enp130s0f0
ip a a 10.10.110.2/24 dev enp130s0f0
ip l s enp130s0f0 mtu 1600
ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \
enp130s0f0 dstport 4789
ip l s vxlan12_sut up
ip a a 20.10.110.2/24 dev vxlan12_sut
iperf3 -c 20.10.110.1 #should connect
Without this patch, TX descriptor was using wrong data, due to
l4 header pointing wrong address. NIC would then drop those packets
internally, due to incorrect TX descriptor data, which increased
GLV_TEPC register.
Fixes: b4fb2d33514a ("i40e: Add support for MPLS + TSO")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
---
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 7bc1174edf6b..af69ccc6e8d2 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -3204,11 +3204,13 @@ static int i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags,
protocol = vlan_get_protocol(skb);
- if (eth_p_mpls(protocol))
+ if (eth_p_mpls(protocol)) {
ip.hdr = skb_inner_network_header(skb);
- else
+ l4.hdr = skb_checksum_start(skb);
+ } else {
ip.hdr = skb_network_header(skb);
- l4.hdr = skb_checksum_start(skb);
+ l4.hdr = skb_transport_header(skb);
+ }
/* set the tx_flags to indicate the IP protocol type. this is
* required so that checksum header computation below is accurate.
--
2.27.0
_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
next reply other threads:[~2022-07-27 9:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-27 9:19 Mateusz Palczewski [this message]
2022-08-01 12:03 ` [Intel-wired-lan] [PATCH net v1] i40e: Fix tunnel checksum offload with fragmented traffic Szlosek, Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220727091940.10902-1-mateusz.palczewski@intel.com \
--to=mateusz.palczewski@intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=przemyslawx.patynowski@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox