From: Jesse Brandeburg <jesse.brandeburg@intel.com>
To: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Eric Dumazet <edumazet@google.com>,
Tony Nguyen <anthony.l.nguyen@intel.com>,
Alan Brady <alan.brady@intel.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
"David S. Miller" <davem@davemloft.net>
Subject: [Intel-wired-lan] [PATCH iwl-next v1 1/2] igb: simplify pci ops declaration
Date: Sat, 10 Feb 2024 14:01:08 -0800 [thread overview]
Message-ID: <20240210220109.3179408-2-jesse.brandeburg@intel.com> (raw)
In-Reply-To: <20240210220109.3179408-1-jesse.brandeburg@intel.com>
The igb driver was pre-declaring tons of functions just so that it could
have an early declaration of the pci_driver struct.
Delete a bunch of the declarations and move the struct to the bottom of the
file, after all the functions are declared.
Reviewed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
---
e1p v2: add back mistakenly deleted pm ops struct.
---
drivers/net/ethernet/intel/igb/igb_main.c | 51 ++++++++++-------------
1 file changed, 22 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 4df8d4153aa5..fdca4901defa 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -106,8 +106,6 @@ static int igb_setup_all_rx_resources(struct igb_adapter *);
static void igb_free_all_tx_resources(struct igb_adapter *);
static void igb_free_all_rx_resources(struct igb_adapter *);
static void igb_setup_mrqc(struct igb_adapter *);
-static int igb_probe(struct pci_dev *, const struct pci_device_id *);
-static void igb_remove(struct pci_dev *pdev);
static void igb_init_queue_configuration(struct igb_adapter *adapter);
static int igb_sw_init(struct igb_adapter *);
int igb_open(struct net_device *);
@@ -178,20 +176,6 @@ static int igb_vf_configure(struct igb_adapter *adapter, int vf);
static int igb_disable_sriov(struct pci_dev *dev, bool reinit);
#endif
-static int igb_suspend(struct device *);
-static int igb_resume(struct device *);
-static int igb_runtime_suspend(struct device *dev);
-static int igb_runtime_resume(struct device *dev);
-static int igb_runtime_idle(struct device *dev);
-#ifdef CONFIG_PM
-static const struct dev_pm_ops igb_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume)
- SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume,
- igb_runtime_idle)
-};
-#endif
-static void igb_shutdown(struct pci_dev *);
-static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs);
#ifdef CONFIG_IGB_DCA
static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
static struct notifier_block dca_notifier = {
@@ -219,19 +203,6 @@ static const struct pci_error_handlers igb_err_handler = {
static void igb_init_dmac(struct igb_adapter *adapter, u32 pba);
-static struct pci_driver igb_driver = {
- .name = igb_driver_name,
- .id_table = igb_pci_tbl,
- .probe = igb_probe,
- .remove = igb_remove,
-#ifdef CONFIG_PM
- .driver.pm = &igb_pm_ops,
-#endif
- .shutdown = igb_shutdown,
- .sriov_configure = igb_pci_sriov_configure,
- .err_handler = &igb_err_handler
-};
-
MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
MODULE_LICENSE("GPL v2");
@@ -647,6 +618,8 @@ struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
return adapter->netdev;
}
+static struct pci_driver igb_driver;
+
/**
* igb_init_module - Driver Registration Routine
*
@@ -10169,4 +10142,24 @@ static void igb_nfc_filter_restore(struct igb_adapter *adapter)
spin_unlock(&adapter->nfc_lock);
}
+
+#ifdef CONFIG_PM
+static const struct dev_pm_ops igb_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume)
+ SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume,
+ igb_runtime_idle)
+};
+#endif
+
+static struct pci_driver igb_driver = {
+ .name = igb_driver_name,
+ .id_table = igb_pci_tbl,
+ .probe = igb_probe,
+ .remove = igb_remove,
+ .driver.pm = &igb_pm_ops,
+ .shutdown = igb_shutdown,
+ .sriov_configure = igb_pci_sriov_configure,
+ .err_handler = &igb_err_handler
+};
+
/* igb_main.c */
--
2.39.3
next prev parent reply other threads:[~2024-02-10 22:08 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-10 22:01 [Intel-wired-lan] [PATCH iwl-next v1 0/2] net: intel: cleanup power ops Jesse Brandeburg
2024-02-10 22:01 ` Jesse Brandeburg [this message]
2024-02-14 10:32 ` [Intel-wired-lan] [PATCH iwl-next v1 1/2] igb: simplify pci ops declaration Pucha, HimasekharX Reddy
2024-02-19 9:15 ` Simon Horman
2024-02-20 16:48 ` Jesse Brandeburg
2024-02-21 10:35 ` Simon Horman
2024-02-21 11:02 ` Paul Menzel
2024-02-10 22:01 ` [Intel-wired-lan] [PATCH iwl-next v1 2/2] net: intel: implement modern PM ops declarations Jesse Brandeburg
2024-02-14 10:37 ` Pucha, HimasekharX Reddy
2024-02-19 9:22 ` Simon Horman
2024-02-22 13:05 ` Romanowski, Rafal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240210220109.3179408-2-jesse.brandeburg@intel.com \
--to=jesse.brandeburg@intel.com \
--cc=alan.brady@intel.com \
--cc=anthony.l.nguyen@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox