From: Sasha Neftin <sasha.neftin@intel.com>
To: intel-wired-lan@lists.osuosl.org
Cc: Sasha Neftin <sasha.neftin@intel.com>
Subject: [Intel-wired-lan] [iwl-next v1 1/1] igc: Add Energy Efficient Ethernet ability
Date: Sat, 13 Jul 2024 22:02:09 +0300 [thread overview]
Message-ID: <20240713190209.3742789-1-sasha.neftin@intel.com> (raw)
According to the IEEE standard report the EEE ability (registers 7.60 and
7.62) and the EEE Link Partner ability (registers 7.61 and 7.63). Use the
kernel's 'ethtool_keee' structure and report EEE link modes.
Example:
ethtool --show-eee <device>
Before:
Advertised EEE link modes: Not reported
Link partner advertised EEE link modes: Not reported
After:
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Link partner advertised EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
---
drivers/net/ethernet/intel/igc/igc_defines.h | 10 +++
drivers/net/ethernet/intel/igc/igc_ethtool.c | 73 +++++++++++++++++++-
drivers/net/ethernet/intel/igc/igc_regs.h | 7 ++
3 files changed, 89 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h
index 58f6631bfdd5..262d0808fed0 100644
--- a/drivers/net/ethernet/intel/igc/igc_defines.h
+++ b/drivers/net/ethernet/intel/igc/igc_defines.h
@@ -646,6 +646,16 @@
#define IGC_MDIC_READY 0x10000000
#define IGC_MDIC_ERROR 0x40000000
+/* EEE Link Ability */
+#define IGC_EEE_2500BT_MASK BIT(0)
+#define IGC_EEE_1000BT_MASK BIT(2)
+#define IGC_EEE_100BT_MASK BIT(1)
+
+/* EEE Link-Partner Ability */
+#define IGC_LP_EEE_2500BT_MASK BIT(0)
+#define IGC_LP_EEE_1000BT_MASK BIT(2)
+#define IGC_LP_EEE_100BT_MASK BIT(1)
+
#define IGC_N0_QUEUE -1
#define IGC_MAX_MAC_HDR_LEN 127
diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index 201588ca61c4..0f9c24483171 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -1631,8 +1631,11 @@ static int igc_ethtool_get_eee(struct net_device *netdev,
{
struct igc_adapter *adapter = netdev_priv(netdev);
struct igc_hw *hw = &adapter->hw;
- u32 eeer;
+ struct igc_phy_info *phy = &hw->phy;
+ u16 eee_advert, eee_lp_advert;
+ u32 eeer, ret_val;
+ /* EEE supported */
linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
edata->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
@@ -1640,6 +1643,74 @@ static int igc_ethtool_get_eee(struct net_device *netdev,
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
edata->supported);
+ /* EEE Advertisement 1 - reg 7.60 */
+ ret_val = phy->ops.read_reg(hw, (STANDARD_AN_REG_MASK <<
+ MMD_DEVADDR_SHIFT) |
+ IGC_ANEG_EEE_AB1,
+ &eee_advert);
+ if (ret_val) {
+ netdev_err(adapter->netdev,
+ "Failed to read IEEE 7.60 register\n");
+ return -EINVAL;
+ }
+
+ if (eee_advert & IGC_EEE_1000BT_MASK)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ edata->advertised);
+
+ if (eee_advert & IGC_EEE_100BT_MASK)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ edata->advertised);
+
+ /* EEE Advertisement 2 - reg 7.62 */
+ ret_val = phy->ops.read_reg(hw, (STANDARD_AN_REG_MASK <<
+ MMD_DEVADDR_SHIFT) |
+ IGC_ANEG_EEE_AB2,
+ &eee_advert);
+ if (ret_val) {
+ netdev_err(adapter->netdev,
+ "Failed to read IEEE 7.62 register\n");
+ return -EINVAL;
+ }
+
+ if (eee_advert & IGC_EEE_2500BT_MASK)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+ edata->advertised);
+
+ /* EEE Link-Partner Ability 1 - reg 7.61 */
+ ret_val = phy->ops.read_reg(hw, (STANDARD_AN_REG_MASK <<
+ MMD_DEVADDR_SHIFT) |
+ IGC_ANEG_EEE_LP_AB1,
+ &eee_lp_advert);
+ if (ret_val) {
+ netdev_err(adapter->netdev,
+ "Failed to read IEEE 7.61 register\n");
+ return -EINVAL;
+ }
+
+ if (eee_lp_advert & IGC_LP_EEE_1000BT_MASK)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ edata->lp_advertised);
+
+ if (eee_lp_advert & IGC_LP_EEE_100BT_MASK)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ edata->lp_advertised);
+
+ /* EEE Link-Partner Ability 2 - reg 7.63 */
+ ret_val = phy->ops.read_reg(hw, (STANDARD_AN_REG_MASK <<
+ MMD_DEVADDR_SHIFT) |
+ IGC_ANEG_EEE_LP_AB2,
+ &eee_lp_advert);
+ if (ret_val) {
+ netdev_err(adapter->netdev,
+ "Failed to read IEEE 7.63 register\n");
+ return -EINVAL;
+ }
+
+ if (eee_lp_advert & IGC_LP_EEE_2500BT_MASK)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+ edata->lp_advertised);
+
eeer = rd32(IGC_EEER);
/* EEE status on negotiated link */
diff --git a/drivers/net/ethernet/intel/igc/igc_regs.h b/drivers/net/ethernet/intel/igc/igc_regs.h
index c83c723f7c7e..bb6f37f5d3a5 100644
--- a/drivers/net/ethernet/intel/igc/igc_regs.h
+++ b/drivers/net/ethernet/intel/igc/igc_regs.h
@@ -310,6 +310,13 @@
#define IGC_IPCNFG 0x0E38 /* Internal PHY Configuration */
#define IGC_EEE_SU 0x0E34 /* EEE Setup */
+/* EEE ANeg Advertisement Register - reg 7.60 and reg 7.62 */
+#define IGC_ANEG_EEE_AB1 0x003c
+#define IGC_ANEG_EEE_AB2 0x003e
+/* EEE ANeg Link-Partner Advertisement Register - reg 7.61 and reg 7.63 */
+#define IGC_ANEG_EEE_LP_AB1 0x003d
+#define IGC_ANEG_EEE_LP_AB2 0x003f
+
/* LTR registers */
#define IGC_LTRC 0x01A0 /* Latency Tolerance Reporting Control */
#define IGC_LTRMINV 0x5BB0 /* LTR Minimum Value */
--
2.34.1
next reply other threads:[~2024-07-13 19:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-13 19:02 Sasha Neftin [this message]
2024-08-22 13:28 ` [Intel-wired-lan] [iwl-next v1 1/1] igc: Add Energy Efficient Ethernet ability Dahan, AvigailX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240713190209.3742789-1-sasha.neftin@intel.com \
--to=sasha.neftin@intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox