Intel-Wired-Lan Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Marcin Szycik <marcin.szycik@linux.intel.com>
To: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org,
	Marcin Szycik <marcin.szycik@linux.intel.com>,
	maciej.fijalkowski@intel.com,
	Przemek Kitszel <przemyslaw.kitszel@intel.com>,
	mateusz.polchlopek@intel.com
Subject: [Intel-wired-lan] [PATCH iwl-net v2 1/2] ice: Fix entering Safe Mode
Date: Fri, 20 Sep 2024 18:59:17 +0200	[thread overview]
Message-ID: <20240920165916.9592-3-marcin.szycik@linux.intel.com> (raw)

If DDP package is missing or corrupted, the driver should enter Safe Mode.
Instead, an error is returned and probe fails.

Don't check return value of ice_init_ddp_config() to fix this.

Change ice_init_ddp_config() type to void, as now its return is never
checked.

Repro:
* Remove or rename DDP package (/lib/firmware/intel/ice/ddp/ice.pkg)
* Load ice

Fixes: cc5776fe1832 ("ice: Enable switching default Tx scheduler topology")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
---
v2: Change ice_init_ddp_config() type to void
---
 drivers/net/ethernet/intel/ice/ice_main.c | 15 +++------------
 1 file changed, 3 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 0f5c9d347806..aeebf4ae25ae 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -4548,34 +4548,27 @@ ice_init_tx_topology(struct ice_hw *hw, const struct firmware *firmware)
  *
  * This function loads DDP file from the disk, then initializes Tx
  * topology. At the end DDP package is loaded on the card.
- *
- * Return: zero when init was successful, negative values otherwise.
  */
-static int ice_init_ddp_config(struct ice_hw *hw, struct ice_pf *pf)
+static void ice_init_ddp_config(struct ice_hw *hw, struct ice_pf *pf)
 {
 	struct device *dev = ice_pf_to_dev(pf);
 	const struct firmware *firmware = NULL;
 	int err;
 
 	err = ice_request_fw(pf, &firmware);
-	if (err) {
+	if (err)
 		dev_err(dev, "Fail during requesting FW: %d\n", err);
-		return err;
-	}
 
 	err = ice_init_tx_topology(hw, firmware);
 	if (err) {
 		dev_err(dev, "Fail during initialization of Tx topology: %d\n",
 			err);
 		release_firmware(firmware);
-		return err;
 	}
 
 	/* Download firmware to device */
 	ice_load_pkg(firmware, pf);
 	release_firmware(firmware);
-
-	return 0;
 }
 
 /**
@@ -4748,9 +4741,7 @@ int ice_init_dev(struct ice_pf *pf)
 
 	ice_init_feature_support(pf);
 
-	err = ice_init_ddp_config(hw, pf);
-	if (err)
-		return err;
+	ice_init_ddp_config(hw, pf);
 
 	/* if ice_init_ddp_config fails, ICE_FLAG_ADV_FEATURES bit won't be
 	 * set in pf->state, which will cause ice_is_safe_mode to return
-- 
2.45.0


             reply	other threads:[~2024-09-20 16:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-20 16:59 Marcin Szycik [this message]
2024-09-20 16:59 ` [Intel-wired-lan] [PATCH iwl-net v2 2/2] ice: Fix netif_is_ice() in Safe Mode Marcin Szycik
2024-09-20 17:14 ` [Intel-wired-lan] [PATCH iwl-net v2 1/2] ice: Fix entering " Brett Creeley
2024-09-23 10:13   ` Marcin Szycik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240920165916.9592-3-marcin.szycik@linux.intel.com \
    --to=marcin.szycik@linux.intel.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=maciej.fijalkowski@intel.com \
    --cc=mateusz.polchlopek@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=przemyslaw.kitszel@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox