[Intel-wired-lan] [PATCH net-next v7 5/9] idpf: reshuffle idpf_vport struct members to avoid holes

[Pavan Kumar Linga <pavan.kumar.linga@intel.com>]

The previous refactor of moving queue and vector resources out of the
idpf_vport structure, created few holes. Reshuffle the existing members
to avoid holes as much as possible.

Reviewed-by: Anton Nadezhdin <anton.nadezhdin@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
---
 drivers/net/ethernet/intel/idpf/idpf.h | 32 ++++++++++++--------------
 1 file changed, 15 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf.h b/drivers/net/ethernet/intel/idpf/idpf.h
index 8e003aea7656..7696c5495cfc 100644
--- a/drivers/net/ethernet/intel/idpf/idpf.h
+++ b/drivers/net/ethernet/intel/idpf/idpf.h
@@ -333,29 +333,29 @@ struct idpf_q_vec_rsrc {
 /**
  * struct idpf_vport - Handle for netdevices and queue resources
  * @dflt_qv_rsrc: contains default queue and vector resources
- * @num_txq: Number of allocated TX queues
- * @compln_clean_budget: Work budget for completion clean
  * @txqs: Used only in hotpath to get to the right queue very fast
- * @crc_enable: Enable CRC insertion offload
- * @xdpsq_share: whether XDPSQ sharing is enabled
+ * @num_txq: Number of allocated TX queues
  * @num_xdp_txq: number of XDPSQs
  * @xdp_txq_offset: index of the first XDPSQ (== number of regular SQs)
+ * @xdpsq_share: whether XDPSQ sharing is enabled
  * @xdp_prog: installed XDP program
- * @rx_ptype_lkup: Lookup table for ptypes on RX
  * @vdev_info: IDC vport device info pointer
  * @adapter: back pointer to associated adapter
  * @netdev: Associated net_device. Each vport should have one and only one
  *	    associated netdev.
  * @flags: See enum idpf_vport_flags
- * @vport_type: Default SRIOV, SIOV, etc.
+ * @compln_clean_budget: Work budget for completion clean
  * @vport_id: Device given vport identifier
+ * @vport_type: Default SRIOV, SIOV, etc.
  * @idx: Software index in adapter vports struct
- * @default_vport: Use this vport if one isn't specified
  * @max_mtu: device given max possible MTU
  * @default_mac_addr: device will give a default MAC to use
  * @rx_itr_profile: RX profiles for Dynamic Interrupt Moderation
  * @tx_itr_profile: TX profiles for Dynamic Interrupt Moderation
+ * @rx_ptype_lkup: Lookup table for ptypes on RX
  * @port_stats: per port csum, header split, and other offload stats
+ * @default_vport: Use this vport if one isn't specified
+ * @crc_enable: Enable CRC insertion offload
  * @link_up: True if link is up
  * @tx_tstamp_caps: Capabilities negotiated for Tx timestamping
  * @tstamp_config: The Tx tstamp config
@@ -363,34 +363,32 @@ struct idpf_q_vec_rsrc {
  */
 struct idpf_vport {
 	struct idpf_q_vec_rsrc dflt_qv_rsrc;
-	u16 num_txq;
-	u32 compln_clean_budget;
 	struct idpf_tx_queue **txqs;
-	bool crc_enable;
-
-	bool xdpsq_share;
+	u16 num_txq;
 	u16 num_xdp_txq;
 	u16 xdp_txq_offset;
+	bool xdpsq_share;
 	struct bpf_prog *xdp_prog;
 
-	struct libeth_rx_pt *rx_ptype_lkup;
-
 	struct iidc_rdma_vport_dev_info *vdev_info;
 
 	struct idpf_adapter *adapter;
 	struct net_device *netdev;
 	DECLARE_BITMAP(flags, IDPF_VPORT_FLAGS_NBITS);
-	u16 vport_type;
+	u32 compln_clean_budget;
 	u32 vport_id;
+	u16 vport_type;
 	u16 idx;
-	bool default_vport;
 
 	u16 max_mtu;
 	u8 default_mac_addr[ETH_ALEN];
 	u16 rx_itr_profile[IDPF_DIM_PROFILE_SLOTS];
 	u16 tx_itr_profile[IDPF_DIM_PROFILE_SLOTS];
-	struct idpf_port_stats port_stats;
 
+	struct libeth_rx_pt *rx_ptype_lkup;
+	struct idpf_port_stats port_stats;
+	bool default_vport;
+	bool crc_enable;
 	bool link_up;
 
 	struct idpf_ptp_vport_tx_tstamp_caps *tx_tstamp_caps;
-- 
2.43.0