From: Neftin, Sasha <sasha.neftin@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH v2] igc: Add PHY power management control
Date: Thu, 26 Dec 2019 10:13:08 +0200 [thread overview]
Message-ID: <4d1d0f7d-96a2-02f0-4acb-96bfaee0ee77@intel.com> (raw)
In-Reply-To: <f46101da-8d48-84a3-3229-653a36e6e1ae@intel.com>
On 12/12/2019 20:00, Neftin, Sasha wrote:
> On 12/12/2019 19:49, Vinicius Costa Gomes wrote:
>>
>> Sasha Neftin <sasha.neftin@intel.com> writes:
>>
>>> PHY power management control should provide a reliable and accurate
>>> indication of PHY reset completion and decrease the delay time
>>> after a PHY reset
>>>
>>> v1 -> v2: add hw_dbg print for a timeout
>>>
>>> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
>>> ---
>>> ? drivers/net/ethernet/intel/igc/igc_defines.h |? 1 +
>>> ? drivers/net/ethernet/intel/igc/igc_phy.c???? | 12 ++++++++++++
>>> ? drivers/net/ethernet/intel/igc/igc_regs.h??? |? 1 +
>>> ? 3 files changed, 14 insertions(+)
>>>
>>> diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h
>>> b/drivers/net/ethernet/intel/igc/igc_defines.h
>>> index 2121fc34e300..71a4b0281c03 100644
>>> --- a/drivers/net/ethernet/intel/igc/igc_defines.h
>>> +++ b/drivers/net/ethernet/intel/igc/igc_defines.h
>>> @@ -460,6 +460,7 @@
>>> ? /* PHY Status Register */
>>> ? #define MII_SR_LINK_STATUS??? 0x0004 /* Link Status 1 = link */
>>> ? #define MII_SR_AUTONEG_COMPLETE??? 0x0020 /* Auto Neg Complete */
>>> +#define IGC_PHY_RST_COMP??? 0x0100 /* Internal PHY reset completion */
>>> ? /* PHY 1000 MII Register/Bit Definitions */
>>> ? /* PHY Registers defined by IEEE */
>>> diff --git a/drivers/net/ethernet/intel/igc/igc_phy.c
>>> b/drivers/net/ethernet/intel/igc/igc_phy.c
>>> index f4b05af0dd2f..a5483368690a 100644
>>> --- a/drivers/net/ethernet/intel/igc/igc_phy.c
>>> +++ b/drivers/net/ethernet/intel/igc/igc_phy.c
>>> @@ -173,6 +173,7 @@ s32 igc_check_downshift(struct igc_hw *hw)
>>> ? s32 igc_phy_hw_reset(struct igc_hw *hw)
>>> ? {
>>> ????? struct igc_phy_info *phy = &hw->phy;
>>> +??? u32 phpm = 0, timeout = 10000;
>>> ????? s32? ret_val;
>>> ????? u32 ctrl;
>>> @@ -186,6 +187,8 @@ s32 igc_phy_hw_reset(struct igc_hw *hw)
>>> ????? if (ret_val)
>>> ????????? goto out;
>>> +??? phpm = rd32(IGC_I225_PHPM);
>>> +
>>> ????? ctrl = rd32(IGC_CTRL);
>>> ????? wr32(IGC_CTRL, ctrl | IGC_CTRL_PHY_RST);
>>> ????? wrfl();
>>> @@ -195,6 +198,15 @@ s32 igc_phy_hw_reset(struct igc_hw *hw)
>>> ????? wr32(IGC_CTRL, ctrl);
>>> ????? wrfl();
>>> +??? do {
>>> +??????? phpm = rd32(IGC_I225_PHPM);
>>> +??????? timeout--;
>>> +??????? udelay(1);
>>> +??? } while (!(phpm & IGC_PHY_RST_COMP) && timeout);
>>> +
>>> +??? if (!timeout)
>>> +??????? hw_dbg("Timeoui is expired after a phy reset\n");
>>
>> nitpick: Timeoui -> Timeout
>>
> thanks - I will send v3 and fix the typo
RST_COMP still not works as properly. Let's disregard this patch.
> _______________________________________________
> Intel-wired-lan mailing list
> Intel-wired-lan at osuosl.org
> https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
prev parent reply other threads:[~2019-12-26 8:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-12 17:36 [Intel-wired-lan] [PATCH v2] igc: Add PHY power management control Sasha Neftin
2019-12-12 17:49 ` Vinicius Costa Gomes
2019-12-12 18:00 ` Neftin, Sasha
2019-12-25 14:17 ` Neftin, Sasha
2019-12-26 8:13 ` Neftin, Sasha [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4d1d0f7d-96a2-02f0-4acb-96bfaee0ee77@intel.com \
--to=sasha.neftin@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox