Re: [Intel-wired-lan] suspend/resume broken of igc driver broken on 6.12

["Lifshits, Vitaly" <vitaly.lifshits@intel.com>]

On 2/6/2025 6:13 AM, Stephen Hemminger wrote:
> On Wed, 5 Feb 2025 12:36:31 +0200
> "Lifshits, Vitaly" <vitaly.lifshits@intel.com> wrote:
> 
>> On 1/31/2025 3:21 AM, Stephen Hemminger wrote:
>>> On Thu, 30 Jan 2025 21:17:30 +0200
>>> "Lifshits, Vitaly" <vitaly.lifshits@intel.com> wrote:
>>>    
>>>> On 1/30/2025 7:11 PM, Stephen Hemminger wrote:
>>>>> I am using:
>>>>>
>>>>> 5a:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-LM (rev 04)
>>>>> 	Subsystem: Intel Corporation Device 0000
>>>>> 	Flags: bus master, fast devsel, latency 0, IRQ 19, IOMMU group 20
>>>>> 	Memory at 6c500000 (32-bit, non-prefetchable) [size=1M]
>>>>> 	Memory at 6c600000 (32-bit, non-prefetchable) [size=16K]
>>>>> 	Capabilities: [40] Power Management version 3
>>>>> 	Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
>>>>> 	Capabilities: [70] MSI-X: Enable+ Count=5 Masked-
>>>>> 	Capabilities: [a0] Express Endpoint, IntMsgNum 0
>>>>> 	Capabilities: [100] Advanced Error Reporting
>>>>> 	Capabilities: [140] Device Serial Number 58-47-ca-ff-ff-7a-98-3d
>>>>> 	Capabilities: [1c0] Latency Tolerance Reporting
>>>>> 	Capabilities: [1f0] Precision Time Measurement
>>>>> 	Capabilities: [1e0] L1 PM Substates
>>>>> 	Kernel driver in use: igc
>>>>> 	Kernel modules: igc
>>>>>
>>>>>
>>>>> Using both Debian testing and my own kernel built from 6.12, the igc
>>>>> driver appears broken after resume.
>>>>
>>>>    From which system state are you resuming?
>>>>   
>>>>>
>>>>> After resuming the device is down and no address present.
>>>>> Attempts to set link up manually fail.
>>>>
>>>> Did you get any errors in the dmesg log?
>>>> What is the firmware version on your device (you can get it by running
>>>> ethtool -i)?
>>>>   
>>>>> If I do rmmod/modprobe of igc it comes back.
>>>>>
>>>>> Doing a bit of bisectting but it is slow going.
>>>>
>>>> Meanwhile, we'll also try to reproduce this issue in our lab.  Could you
>>>> share more details about your system so we can create a similar setup?
>>>
>>> Given that error reported is -ENODEV, might be a generic netdev problem not
>>> just for igc device.
>>>    
>>
>> We weren't able to reproduce this issue on our systems, even though we
>> tried several suspend-resume cycles on different kernels and different
>> systems.
>>
>> However, a few days ago we received a comment in a BZ about an issue
>> similar to yours. In there adding a short delay in igc_resume function
>> https://bugzilla.kernel.org/show_bug.cgi?id=219143
>> https://bugzilla.kernel.org/show_bug.cgi?id=219143#c123
>>
>>
>>
>> Can you try to see if it fixes your issue as well?
> 
> I tried the proposed delay and it had no impact.
> Any idea of other things to instrument?
> 


Has the adapter worked with a different kernel? Can you try to reproduce 
the issue over kernel 6.9?

Is the LAN cable connected to the igc adapter? Does it maintain link 
during suspend?

Also, I saw that on your board you have three more adapters, I assume 
that enp2s0f0np0 and enp2s0f0np1 are i40e adapters. Does this issue also 
happen to enp87s0?