Intel-Wired-Lan Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Vinicius Costa Gomes <vinicius.gomes@intel.com>
To: Kurt Kanzenbach <kurt@linutronix.de>,
	Tony Nguyen <anthony.l.nguyen@intel.com>,
	Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	"Loktionov, Aleksandr" <aleksandr.loktionov@intel.com>,
	intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
	Kurt Kanzenbach <kurt@linutronix.de>
Subject: Re: [Intel-wired-lan] [PATCH iwl-net v3] igc: Restore default Qbv schedule when changing channels
Date: Mon, 05 Jan 2026 14:39:43 -0800	[thread overview]
Message-ID: <87y0mbwuog.fsf@intel.com> (raw)
In-Reply-To: <20251120-igc_mqprio_channels-v3-1-ce7d6f00720d@linutronix.de>

Kurt Kanzenbach <kurt@linutronix.de> writes:

> The Multi-queue Priority (MQPRIO) and Earliest TxTime First (ETF) offloads
> utilize the Time Sensitive Networking (TSN) Tx mode. This mode is always
> coupled to IEEE 802.1Qbv time aware shaper (Qbv). Therefore, the driver
> sets a default Qbv schedule of all gates opened and a cycle time of
> 1s. This schedule is set during probe.
>
> However, the following sequence of events lead to Tx issues:
>
>  - Boot a dual core system
>    igc_probe():
>      igc_tsn_clear_schedule():
>        -> Default Schedule is set
>        Note: At this point the driver has allocated two Tx/Rx queues, because
>        there are only two CPUs.
>
>  - ethtool -L enp3s0 combined 4
>    igc_ethtool_set_channels():
>      igc_reinit_queues()
>        -> Default schedule is gone, per Tx ring start and end time are zero
>
>   - tc qdisc replace dev enp3s0 handle 100 parent root mqprio \
>       num_tc 4 map 3 3 2 2 0 1 1 1 3 3 3 3 3 3 3 3 \
>       queues 1@0 1@1 1@2 1@3 hw 1
>     igc_tsn_offload_apply():
>       igc_tsn_enable_offload():
>         -> Writes zeros to IGC_STQT(i) and IGC_ENDQT(i), causing Tx to stall/fail
>
> Therefore, restore the default Qbv schedule after changing the number of
> channels.
>
> Furthermore, add a restriction to not allow queue reconfiguration when
> TSN/Qbv is enabled, because it may lead to inconsistent states.
>
> Fixes: c814a2d2d48f ("igc: Use default cycle 'start' and 'end' values for queues")
> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
> ---
> Changes in v3:
> - Adjust commit message and comments (Aleksandr)
> - Link to v2: https://lore.kernel.org/r/20251118-igc_mqprio_channels-v2-1-c32563dede2f@linutronix.de
>
> Changes in v2:
> - Explain abbreviations (Aleksandr)
> - Only clear schedule if no error happened (Aleksandr)
> - Add restriction to avoid inconsistent states (Vinicius)
> - Target net tree (Vinicius)
> - Link to v1: https://lore.kernel.org/r/20251107-igc_mqprio_channels-v1-1-42415562d0f8@linutronix.de
> ---

Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>



Cheers,
-- 
Vinicius

      parent reply	other threads:[~2026-01-05 22:39 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-20  8:18 [Intel-wired-lan] [PATCH iwl-net v3] igc: Restore default Qbv schedule when changing channels Kurt Kanzenbach
2025-11-20  8:47 ` Loktionov, Aleksandr
2025-12-29 14:50 ` Avigail Dahan
2026-01-05 22:39 ` Vinicius Costa Gomes [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87y0mbwuog.fsf@intel.com \
    --to=vinicius.gomes@intel.com \
    --cc=aleksandr.loktionov@intel.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=anthony.l.nguyen@intel.com \
    --cc=bigeasy@linutronix.de \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=kuba@kernel.org \
    --cc=kurt@linutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=przemyslaw.kitszel@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox