From: Bowers, AndrewX <andrewx.bowers@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH S34 v4 1/6] ice: Create and register virtual bus for RDMA
Date: Thu, 5 Mar 2020 22:32:05 +0000 [thread overview]
Message-ID: <900b389785224a86a62d8eb1f1bed42b@intel.com> (raw)
In-Reply-To: <20200302233107.4691-1-anthony.l.nguyen@intel.com>
> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at osuosl.org] On
> Behalf Of Tony Nguyen
> Sent: Monday, March 2, 2020 3:31 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S34 v4 1/6] ice: Create and register virtual
> bus for RDMA
>
> From: Dave Ertman <david.m.ertman@intel.com>
>
> The RDMA block does not have its own PCI function, instead it must utilize
> the ice driver to gain access to the PCI device. Create a virtual bus device so
> the irdma driver can register a virtual bus driver to bind to it and receive
> device data. The device data contains all of the relevant information that the
> irdma peer will need to access this PF's IIDC API callbacks.
>
> Note the header file iidc.h is located under include/linux/net/intel as this is a
> unified header file to be used by all consumers of the IIDC interface.
>
> Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
> ---
> MAINTAINERS | 1 +
> drivers/net/ethernet/intel/Kconfig | 1 +
> drivers/net/ethernet/intel/ice/Makefile | 1 +
> drivers/net/ethernet/intel/ice/ice.h | 13 +
> .../net/ethernet/intel/ice/ice_adminq_cmd.h | 1 +
> drivers/net/ethernet/intel/ice/ice_common.c | 18 +-
> drivers/net/ethernet/intel/ice/ice_dcb_lib.c | 31 ++
> drivers/net/ethernet/intel/ice/ice_dcb_lib.h | 3 +
> .../net/ethernet/intel/ice/ice_hw_autogen.h | 1 +
> drivers/net/ethernet/intel/ice/ice_idc.c | 400 ++++++++++++++++++
> drivers/net/ethernet/intel/ice/ice_idc_int.h | 67 +++
> drivers/net/ethernet/intel/ice/ice_lib.c | 11 +
> drivers/net/ethernet/intel/ice/ice_lib.h | 2 +
> drivers/net/ethernet/intel/ice/ice_main.c | 56 ++-
> drivers/net/ethernet/intel/ice/ice_type.h | 1 +
> include/linux/net/intel/iidc.h | 337 +++++++++++++++
> 16 files changed, 941 insertions(+), 3 deletions(-) create mode 100644
> drivers/net/ethernet/intel/ice/ice_idc.c
> create mode 100644 drivers/net/ethernet/intel/ice/ice_idc_int.h
> create mode 100644 include/linux/net/intel/iidc.h
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
prev parent reply other threads:[~2020-03-05 22:32 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-02 23:31 [Intel-wired-lan] [PATCH S34 v4 1/6] ice: Create and register virtual bus for RDMA Tony Nguyen
2020-03-02 23:31 ` [Intel-wired-lan] [PATCH S34 v4 2/6] ice: Complete RDMA peer registration Tony Nguyen
2020-03-05 22:32 ` Bowers, AndrewX
2020-03-02 23:31 ` [Intel-wired-lan] [PATCH S34 v4 3/6] ice: Support resource allocation requests Tony Nguyen
2020-03-05 22:33 ` Bowers, AndrewX
2020-03-02 23:31 ` [Intel-wired-lan] [PATCH S34 v4 4/6] ice: Enable event notifications Tony Nguyen
2020-03-05 22:33 ` Bowers, AndrewX
2020-03-02 23:31 ` [Intel-wired-lan] [PATCH S34 v4 5/6] ice: Allow reset operations Tony Nguyen
2020-03-05 22:33 ` Bowers, AndrewX
2020-03-02 23:31 ` [Intel-wired-lan] [PATCH S34 v4 6/6] ice: Pass through communications to VF Tony Nguyen
2020-03-05 22:34 ` Bowers, AndrewX
2020-03-05 22:32 ` Bowers, AndrewX [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=900b389785224a86a62d8eb1f1bed42b@intel.com \
--to=andrewx.bowers@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox