Intel-Wired-Lan Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Corinna Vinschen <vinschen@redhat.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH v2 1/1] igc: Fix BUG: scheduling while atomic
Date: Wed, 9 Mar 2022 09:44:46 +0100	[thread overview]
Message-ID: <Yiho/igPO1golfLA@calimero.vinschen.de> (raw)
In-Reply-To: <20220309061919.3115112-1-sasha.neftin@intel.com>

On Mar  9 08:19, Sasha Neftin wrote:
> Replace usleep_range() method with udelay() method to allow atomic contexts
> in low-level MDIO access functions.
> 
> The following issue can be seen by doing the following:
> $ modprobe -r bonding
> $ modprobe -v bonding max_bonds=1 mode=1 miimon=100 use_carrier=0
> $ ip link set bond0 up
> $ ifenslave bond0 eth0 eth1
> 
> [  982.357308] BUG: scheduling while atomic: kworker/u64:0/9/0x00000002
> [  982.364431] INFO: lockdep is turned off.
> [  982.368824] Modules linked in: bonding sctp ip6_udp_tunnel udp_tunnel mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core nfp tls sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support mxm_wmi dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate intel_uncore pcspkr lpc_ich mei_me ipmi_ssif mei ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci crc32c_intel libata i2c_algo_bit tg3 megaraid_sas igc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: bonding]
> [  982.437941] CPU: 25 PID: 9 Comm: kworker/u64:0 Kdump: loaded Tainted: G        W        --------- -  - 4.18.0-348.el8.x86_64+debug #1
> [  982.451333] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 2.7.0 12/005/2017
> [  982.459791] Workqueue: bond0 bond_mii_monitor [bonding]
> [  982.465622] Call Trace:
> [  982.468355]  dump_stack+0x8e/0xd0
> [  982.472056]  __schedule_bug.cold.60+0x3a/0x60
> [  982.476919]  __schedule+0x147b/0x1bc0
> [  982.481007]  ? firmware_map_remove+0x16b/0x16b
> [  982.485967]  ? hrtimer_fixup_init+0x40/0x40
> [  982.490625]  schedule+0xd9/0x250
> [  982.494227]  schedule_hrtimeout_range_clock+0x10d/0x2c0
> [  982.500058]  ? hrtimer_nanosleep_restart+0x130/0x130
> [  982.505598]  ? hrtimer_init_sleeper_on_stack+0x90/0x90
> [  982.511332]  ? usleep_range+0x88/0x130
> [  982.515514]  ? recalibrate_cpu_khz+0x10/0x10
> [  982.520279]  ? ktime_get+0xab/0x1c0
> [  982.524175]  ? usleep_range+0x88/0x130
> [  982.528355]  usleep_range+0xdd/0x130
> [  982.532344]  ? console_conditional_schedule+0x30/0x30
> [  982.537987]  ? igc_put_hw_semaphore+0x17/0x60 [igc]
> [  982.543432]  igc_read_phy_reg_gpy+0x111/0x2b0 [igc]
> [  982.548887]  igc_phy_has_link+0xfa/0x260 [igc]
> [  982.553847]  ? igc_get_phy_id+0x210/0x210 [igc]
> [  982.558894]  ? lock_acquire+0x34d/0x890
> [  982.563187]  ? lock_downgrade+0x710/0x710
> [  982.567659]  ? rcu_read_unlock+0x50/0x50
> [  982.572039]  igc_check_for_copper_link+0x106/0x210 [igc]
> [  982.577970]  ? igc_config_fc_after_link_up+0x840/0x840 [igc]
> [  982.584286]  ? rcu_read_unlock+0x50/0x50
> [  982.588661]  ? lock_release+0x591/0xb80
> [  982.592939]  ? lock_release+0x591/0xb80
> [  982.597220]  igc_has_link+0x113/0x330 [igc]
> [  982.601887]  ? lock_downgrade+0x710/0x710
> [  982.606362]  igc_ethtool_get_link+0x6d/0x90 [igc]
> [  982.611614]  bond_check_dev_link+0x131/0x2c0 [bonding]
> [  982.617350]  ? bond_time_in_interval+0xd0/0xd0 [bonding]
> [  982.623277]  ? rcu_read_lock_held+0x62/0xc0
> [  982.627944]  ? rcu_read_lock_sched_held+0xe0/0xe0
> [  982.633198]  bond_mii_monitor+0x314/0x2500 [bonding]
> [  982.638738]  ? lock_contended+0x880/0x880
> [  982.643214]  ? bond_miimon_link_change+0xa0/0xa0 [bonding]
> [  982.649336]  ? lock_acquire+0x34d/0x890
> [  982.653615]  ? lock_downgrade+0x710/0x710
> [  982.658089]  ? debug_object_deactivate+0x221/0x340
> [  982.663436]  ? rcu_read_unlock+0x50/0x50
> [  982.667811]  ? debug_print_object+0x2b0/0x2b0
> [  982.672672]  ? __switch_to_asm+0x41/0x70
> [  982.677049]  ? __switch_to_asm+0x35/0x70
> [  982.681426]  ? _raw_spin_unlock_irq+0x24/0x40
> [  982.686288]  ? trace_hardirqs_on+0x20/0x195
> [  982.690956]  ? _raw_spin_unlock_irq+0x24/0x40
> [  982.695818]  process_one_work+0x8f0/0x1770
> [  982.700390]  ? pwq_dec_nr_in_flight+0x320/0x320
> [  982.705443]  ? debug_show_held_locks+0x50/0x50
> [  982.710403]  worker_thread+0x87/0xb40
> [  982.714489]  ? process_one_work+0x1770/0x1770
> [  982.719349]  kthread+0x344/0x410
> [  982.722950]  ? kthread_insert_work_sanity_check+0xd0/0xd0
> [  982.728975]  ret_from_fork+0x3a/0x50
> 
> v2:
> Fixed typo, edited message and added kernel log
> 
> Fixes: 5586838fe9ce ("igc: Add code for PHY support")
> Reported-by: Corinna Vinschen <vinschen@redhat.com>
> Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>

Tested-by: Corinna Vinschen <vinschen@redhat.com>


  reply	other threads:[~2022-03-09  8:44 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-09  6:19 [Intel-wired-lan] [PATCH v2 1/1] igc: Fix BUG: scheduling while atomic Sasha Neftin
2022-03-09  8:44 ` Corinna Vinschen [this message]
2022-04-03 10:24 ` naamax.meir

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Yiho/igPO1golfLA@calimero.vinschen.de \
    --to=vinschen@redhat.com \
    --cc=intel-wired-lan@osuosl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox