From: Bowers, AndrewX <andrewx.bowers@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH S35 15/15] ice: Suppress Coverity warnings for xdp_rxq_info_reg
Date: Wed, 18 Dec 2019 22:34:35 +0000 [thread overview]
Message-ID: <e0b1b810ca2e4efea9e04e80b707ce05@intel.com> (raw)
In-Reply-To: <20191212111307.33566-15-anthony.l.nguyen@intel.com>
> -----Original Message-----
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces at osuosl.org] On
> Behalf Of Tony Nguyen
> Sent: Thursday, December 12, 2019 3:13 AM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S35 15/15] ice: Suppress Coverity warnings
> for xdp_rxq_info_reg
>
> From: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com>
>
> Coverity reports some of the calls to xdp_rxq_info_reg() as potential issues,
> because the driver does not check its return value. However, those calls are
> wrapped with "if (!xdp_rxq_info_is_reg(&ring->xdp_rxq))"
> and this check alone is enough to be sure that the function will never fail.
>
> All possible states of xdp_rxq_info are:
> - NEW,
> - REGISTERED,
> - UNREGISTERED,
> - UNUSED.
>
> The driver won't mark a queue as UNUSED under no circumstance, so the
> return value can be ignored safely.
>
> Add comments for Coverity right above calls to xdp_rxq_info_reg() to
> suppress the warnings.
>
> Signed-off-by: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com>
> ---
> drivers/net/ethernet/intel/ice/ice_base.c | 2 ++
> 1 file changed, 2 insertions(+)
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
next prev parent reply other threads:[~2019-12-18 22:34 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-12 11:12 [Intel-wired-lan] [PATCH S35 01/15] ice: Support UDP segmentation offload Tony Nguyen
2019-12-12 11:12 ` [Intel-wired-lan] [PATCH S35 02/15] ice: Fix VF spoofchk Tony Nguyen
2019-12-18 22:15 ` Bowers, AndrewX
2019-12-12 11:12 ` [Intel-wired-lan] [PATCH S35 03/15] ice: Add code to keep track of current dflt_vsi Tony Nguyen
2019-12-18 22:16 ` Bowers, AndrewX
2019-12-12 11:12 ` [Intel-wired-lan] [PATCH S35 04/15] ice: Add ice_for_each_vf() macro Tony Nguyen
2019-12-18 22:18 ` Bowers, AndrewX
2019-12-12 11:12 ` [Intel-wired-lan] [PATCH S35 05/15] ice: Set default value for ITR in alloc function Tony Nguyen
2019-12-18 22:20 ` Bowers, AndrewX
2019-12-12 11:12 ` [Intel-wired-lan] [PATCH S35 06/15] ice: Restore interrupt throttle settings after VSI rebuild Tony Nguyen
2019-12-18 22:20 ` Bowers, AndrewX
2019-12-12 11:12 ` [Intel-wired-lan] [PATCH S35 07/15] ice: Return error on not supported ethtool -C parameters Tony Nguyen
2019-12-18 22:23 ` Bowers, AndrewX
2019-12-12 11:13 ` [Intel-wired-lan] [PATCH S35 08/15] ice: Remove Rx flex descriptor programming Tony Nguyen
2019-12-18 22:25 ` Bowers, AndrewX
2019-12-12 11:13 ` [Intel-wired-lan] [PATCH S35 09/15] ice: Fix VF link state when it's IFLA_VF_LINK_STATE_AUTO Tony Nguyen
2019-12-18 22:26 ` Bowers, AndrewX
2019-12-12 11:13 ` [Intel-wired-lan] [PATCH S35 10/15] ice: Enable ip link show on the PF to display VF unicast MAC(s) Tony Nguyen
2019-12-18 22:29 ` Bowers, AndrewX
2019-12-12 11:13 ` [Intel-wired-lan] [PATCH S35 11/15] ice: Demote MTU change print to debug Tony Nguyen
2019-12-18 22:31 ` Bowers, AndrewX
2019-12-12 11:13 ` [Intel-wired-lan] [PATCH S35 12/15] ice: suppress checked_return error Tony Nguyen
2019-12-18 22:32 ` Bowers, AndrewX
2019-12-12 11:13 ` [Intel-wired-lan] [PATCH S35 13/15] ice: add extra check for null rx descriptor Tony Nguyen
2019-12-18 22:32 ` Bowers, AndrewX
2019-12-12 11:13 ` [Intel-wired-lan] [PATCH S35 14/15] ice: Add a boundary check in ice_xsk_umem() Tony Nguyen
2019-12-18 22:34 ` Bowers, AndrewX
2019-12-12 11:13 ` [Intel-wired-lan] [PATCH S35 15/15] ice: Suppress Coverity warnings for xdp_rxq_info_reg Tony Nguyen
2019-12-18 22:34 ` Bowers, AndrewX [this message]
2019-12-18 22:11 ` [Intel-wired-lan] [PATCH S35 01/15] ice: Support UDP segmentation offload Bowers, AndrewX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e0b1b810ca2e4efea9e04e80b707ce05@intel.com \
--to=andrewx.bowers@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox