From: Tomasz Lichwala <tomasz.lichwala@linux.intel.com>
To: Aleksandr Loktionov <aleksandr.loktionov@intel.com>,
intel-wired-lan@lists.osuosl.org, anthony.l.nguyen@intel.com
Cc: netdev@vger.kernel.org, Konrad Knitter <konrad.knitter@intel.com>,
Simon Horman <horms@kernel.org>
Subject: Re: [PATCH iwl-net v3 2/3] ice: fix autoneg disable when link partner doesn't support AN
Date: Mon, 21 Sep 2026 13:33:57 +0200 [thread overview]
Message-ID: <e48dad69-8f82-4e50-a016-4dd32b05782c@linux.intel.com> (raw)
In-Reply-To: <20260918133234.4169074-3-aleksandr.loktionov@intel.com>
On 18.09.2026 15:32, Aleksandr Loktionov wrote:
> From: Konrad Knitter <konrad.knitter@intel.com>
>
> Disabling autonegotiation was silently ignored when autoneg had not yet
> completed (ICE_AQ_AN_COMPLETED was not set), leaving the configuration
> unchanged with no error. This could prevent link from forming if the
> link partner requires non-autoneg mode.
>
> Extend the condition to also allow disabling autoneg when the link
> partner reports no AN ability (ICE_AQ_LP_AN_ABILITY clear). Gate the
> ICE_AQ_LP_AN_ABILITY check on the link being up so that stale or
> zeroed an_info when link is down does not produce a false positive.
> Introduce the helper ice_autoneg_disable_allowed() to make the check
> explicit.
>
> Fixes: f1a4a66d2310 ("ice: fix set pause param autoneg check")
> Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
> Reviewed-by: Simon Horman <horms@kernel.org>
> ---
> drivers/net/ethernet/intel/ice/ice_ethtool.c | 26 ++++++++++++++++++--
> 1 file changed, 24 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
> index a257b7d..4ce198f 100644
> --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
> +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
> @@ -2501,6 +2501,28 @@ ice_ksettings_find_adv_link_speed(const struct ethtool_link_ksettings *ks)
> return adv_link_speed;
> }
>
> +/**
> + * ice_autoneg_disable_allowed - check if autoneg can be disabled
> + * @p: port info
> + *
> + * Check if autonegotiation can be disabled based on link state.
> + * ICE_AQ_LP_AN_ABILITY is only valid when the link is up; gate that
> + * check accordingly to avoid false positives from stale link data.
> + *
> + * Return: true if autoneg has completed, or if the link is up and the
> + * link partner does not advertise autonegotiation capability.
> + */
> +static bool ice_autoneg_disable_allowed(struct ice_port_info *p)
> +{
> + u8 an_info = p->phy.link_info.an_info;
> +
> + if (an_info & ICE_AQ_AN_COMPLETED)
> + return true;
> + /* ICE_AQ_LP_AN_ABILITY is only valid when link is up */
> + return (p->phy.link_info.link_info & ICE_AQ_LINK_UP) &&
> + !(an_info & ICE_AQ_LP_AN_ABILITY);
> +}
> +
> /**
> * ice_setup_autoneg
> * @p: port info
> @@ -2539,8 +2561,8 @@ ice_setup_autoneg(struct ice_port_info *p, struct ethtool_link_ksettings *ks,
> }
> }
> } else {
> - /* If autoneg is currently enabled */
> - if (p->phy.link_info.an_info & ICE_AQ_AN_COMPLETED) {
> + /* If autoneg completed or link partner does not support AN */
> + if (ice_autoneg_disable_allowed(p)) {
> /* If autoneg is supported 10GBASE_T is the only PHY
> * that can disable it, so otherwise return error
> */
Reviewed-by: Tomasz Lichwala <tomasz.lichwala@linux.intel.com>
next prev parent reply other threads:[~2026-09-21 11:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-18 13:32 [PATCH iwl-net v3 0/3] ice: fixes for pause reporting, autoneg and RDMA Aleksandr Loktionov
2026-09-18 13:32 ` [PATCH iwl-net v3 1/3] ice: fix asymmetric pause negotiation reporting in ethtool Aleksandr Loktionov
2026-09-18 13:32 ` [PATCH iwl-net v3 2/3] ice: fix autoneg disable when link partner doesn't support AN Aleksandr Loktionov
2026-09-21 11:33 ` Tomasz Lichwala [this message]
2026-09-18 13:32 ` [PATCH iwl-net v3 3/3] ice: support RDMA on 4+-port E830 devices Aleksandr Loktionov
2026-09-21 11:34 ` Tomasz Lichwala
2026-09-21 14:19 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e48dad69-8f82-4e50-a016-4dd32b05782c@linux.intel.com \
--to=tomasz.lichwala@linux.intel.com \
--cc=aleksandr.loktionov@intel.com \
--cc=anthony.l.nguyen@intel.com \
--cc=horms@kernel.org \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=konrad.knitter@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox