Intel-Wired-Lan Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Josef Bacik" <josef@toxicpanda.com>
Cc: intel-wired-lan@lists.osuosl.org, linux-rdma@vger.kernel.org
Subject: Re: [PATCH net-next v2 04/10] net: niu: check for failure when pulling in the RX header
Date: Fri, 09 Oct 2026 21:03:56 +0000	[thread overview]
Message-ID: <sashiko-outbox-166069@kernel.org> (raw)
In-Reply-To: <20261008-b4-pskb-pull-tail-drivers-v2-4-8f2bd9bee138@toxicpanda.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] net: niu: BUG() in eth_type_trans due to insufficient pskb_may_pull length
--

commit 19ab5666684c0028709e6a0efad246e9460b1000
Author: Josef Bacik <josef@toxicpanda.com>

net: niu: check for failure when pulling in the RX header

This commit replaces __pskb_pull_tail() with pskb_may_pull() in
niu_process_rx_pkt() and adds error handling. If pulling the header fails,
the packet is dropped instead of crashing.

> diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
> index c74a97fe54641..d1c0e868004d1 100644
> --- a/drivers/net/ethernet/sun/niu.c
> +++ b/drivers/net/ethernet/sun/niu.c
> @@ -3488,7 +3488,11 @@ static int niu_process_rx_pkt(struct napi_struct *napi, struct niu *np,
>  
>  	len += sizeof(*rh);
>  	len = min_t(int, len, sizeof(*rh) + VLAN_ETH_HLEN);
> -	__pskb_pull_tail(skb, len);
> +	if (unlikely(!pskb_may_pull(skb, len))) {

[Severity: High]
Is it possible for a malformed hardware descriptor to provide a small
RCR_ENTRY_L2_LEN, resulting in a BUG_ON assertion in __skb_pull() later
when eth_type_trans() is called?

If the hardware reports an unusually small RCR_ENTRY_L2_LEN (e.g. 4 bytes),
then len evaluates to 12. pskb_may_pull(skb, 12) would only ensure 12 bytes
in the linear area.

Later in this function, skb_pull(skb, sizeof(*rh)) consumes the 8-byte
hardware header, leaving 4 linear bytes. The packet is then passed to
eth_type_trans(), which attempts to pull ETH_HLEN (14) bytes:

drivers/net/ethernet/sun/niu.c:niu_process_rx_pkt() {
    ...
    skb_pull(skb, sizeof(*rh));
    ...
    skb->protocol = eth_type_trans(skb, np->dev);
    ...
}

If the total skb->len is greater than 14 due to fragments, __skb_pull()
will execute and subtract 14 from skb->len. This could drop skb->len below
skb->data_len and trigger a BUG_ON(skb->len < skb->data_len) in __skb_pull().

Should pskb_may_pull() ensure at least sizeof(*rh) + ETH_HLEN bytes to
protect the downstream eth_type_trans() call?

> +		rp->rx_dropped++;
> +		kfree_skb(skb);
> +		return num_rcr;
> +	}
>  
>  	rh = (struct rx_pkt_hdr1 *) skb->data;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261008-b4-pskb-pull-tail-drivers-v2-0-8f2bd9bee138@toxicpanda.com?part=4

  reply	other threads:[~2026-10-09 21:04 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-08 21:02 [PATCH net-next v2 00/10] net: stop calling __pskb_pull_tail() from drivers Josef Bacik
2026-10-08 21:02 ` [PATCH net-next v2 01/10] net: skbuff: add skb_drop_empty_frags() Josef Bacik
2026-10-09 21:03   ` sashiko-bot
2026-10-08 21:02 ` [PATCH net-next v2 02/10] net: ftmac100: check for failure when pulling in the RX header Josef Bacik
2026-10-09 21:04   ` sashiko-bot
2026-10-08 21:02 ` [PATCH net-next v2 03/10] net/mlx5e: check for failure when pulling the Ethernet header after XDP Josef Bacik
2026-10-09 21:03   ` sashiko-bot
2026-10-13 10:02   ` Tariq Toukan
2026-10-08 21:02 ` [PATCH net-next v2 04/10] net: niu: check for failure when pulling in the RX header Josef Bacik
2026-10-09 21:03   ` sashiko-bot [this message]
2026-10-08 21:02 ` [PATCH net-next v2 05/10] xen/netfront: check for failure when pulling in xennet_fill_frags() Josef Bacik
2026-10-09 21:03   ` sashiko-bot
2026-10-08 21:02 ` [PATCH net-next v2 06/10] e1000: use pskb_may_pull() in the 82544 TSO workaround Josef Bacik
2026-10-09 21:03   ` sashiko-bot
2026-10-08 21:02 ` [PATCH net-next v2 07/10] e1000e: use pskb_may_pull() in the 82571/2/3 " Josef Bacik
2026-10-09 21:04   ` sashiko-bot
2026-10-08 21:02 ` [PATCH net-next v2 08/10] netxen: use pskb_may_pull() to pull excess TX frags into the head Josef Bacik
2026-10-09 21:04   ` sashiko-bot
2026-10-08 21:02 ` [PATCH net-next v2 09/10] qlcnic: " Josef Bacik
2026-10-09 21:04   ` sashiko-bot
2026-10-08 21:02 ` [PATCH net-next v2 10/10] net: skbuff: don't reset truesize in skb_condense() if the pull fails Josef Bacik
2026-10-09 21:04   ` sashiko-bot
2026-10-08 21:11 ` [PATCH net-next v2 00/10] net: stop calling __pskb_pull_tail() from drivers Jakub Kicinski
2026-10-09 13:43   ` Josef Bacik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-166069@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=josef@toxicpanda.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox