From: "Michael J. Ruhl" <michael.j.ruhl@intel.com>
To: intel-xe@lists.freedesktop.org,
platform-driver-x86@vger.kernel.org, david.e.box@linux.intel.com,
pavel.e.popov@intel.com
Cc: michael.j.ruhl@intel.com
Subject: [PATCH v2 5/6] platform/x86/intel/pmt: Add support for PMT base adjust
Date: Thu, 20 Jun 2024 17:20:49 -0400 [thread overview]
Message-ID: <20240620212055.3314064-6-michael.j.ruhl@intel.com> (raw)
In-Reply-To: <20240620212055.3314064-1-michael.j.ruhl@intel.com>
DVSEC offsets are based on the endpoint BAR. If an endpoint is
not avialable allow the offset information to be adjusted by the
parent driver.
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
---
drivers/platform/x86/intel/pmt/class.h | 1 +
drivers/platform/x86/intel/pmt/telemetry.c | 9 +++++++++
drivers/platform/x86/intel/vsec.c | 1 +
include/linux/intel_vsec.h | 2 ++
4 files changed, 13 insertions(+)
diff --git a/drivers/platform/x86/intel/pmt/class.h b/drivers/platform/x86/intel/pmt/class.h
index a267ac964423..984cd40ee814 100644
--- a/drivers/platform/x86/intel/pmt/class.h
+++ b/drivers/platform/x86/intel/pmt/class.h
@@ -46,6 +46,7 @@ struct intel_pmt_entry {
void __iomem *base;
struct pmt_callbacks *cb;
unsigned long base_addr;
+ s32 base_adjust;
size_t size;
u32 guid;
int devid;
diff --git a/drivers/platform/x86/intel/pmt/telemetry.c b/drivers/platform/x86/intel/pmt/telemetry.c
index c9feac859e57..5c44e500e8f6 100644
--- a/drivers/platform/x86/intel/pmt/telemetry.c
+++ b/drivers/platform/x86/intel/pmt/telemetry.c
@@ -78,6 +78,13 @@ static int pmt_telem_header_decode(struct intel_pmt_entry *entry,
header->access_type = TELEM_ACCESS(readl(disc_table));
header->guid = readl(disc_table + TELEM_GUID_OFFSET);
header->base_offset = readl(disc_table + TELEM_BASE_OFFSET);
+ if (entry->base_adjust) {
+ u32 new_base = header->base_offset + entry->base_adjust;
+
+ dev_dbg(dev, "Adjusting baseoffset from 0x%x to 0x%x\n",
+ header->base_offset, new_base);
+ header->base_offset = new_base;
+ }
/* Size is measured in DWORDS, but accessor returns bytes */
header->size = TELEM_SIZE(readl(disc_table));
@@ -302,6 +309,8 @@ static int pmt_telem_probe(struct auxiliary_device *auxdev, const struct auxilia
for (i = 0; i < intel_vsec_dev->num_resources; i++) {
struct intel_pmt_entry *entry = &priv->entry[priv->num_entries];
+ entry->base_adjust = intel_vsec_dev->base_adjust;
+
mutex_lock(&ep_lock);
ret = intel_pmt_dev_create(entry, &pmt_telem_ns, intel_vsec_dev, i);
mutex_unlock(&ep_lock);
diff --git a/drivers/platform/x86/intel/vsec.c b/drivers/platform/x86/intel/vsec.c
index 7b5cc9993974..be079d62a7bc 100644
--- a/drivers/platform/x86/intel/vsec.c
+++ b/drivers/platform/x86/intel/vsec.c
@@ -212,6 +212,7 @@ static int intel_vsec_add_dev(struct pci_dev *pdev, struct intel_vsec_header *he
intel_vsec_dev->num_resources = header->num_entries;
intel_vsec_dev->quirks = info->quirks;
intel_vsec_dev->base_addr = info->base_addr;
+ intel_vsec_dev->base_adjust = info->base_adjust;
intel_vsec_dev->priv_data = info->priv_data;
if (header->id == VSEC_ID_SDSI)
diff --git a/include/linux/intel_vsec.h b/include/linux/intel_vsec.h
index 003301783331..930eab246fa1 100644
--- a/include/linux/intel_vsec.h
+++ b/include/linux/intel_vsec.h
@@ -79,6 +79,7 @@ struct intel_vsec_platform_info {
unsigned long caps;
unsigned long quirks;
u64 base_addr;
+ s32 base_adjust;
};
struct intel_vsec_device {
@@ -92,6 +93,7 @@ struct intel_vsec_device {
size_t priv_data_size;
unsigned long quirks;
u64 base_addr;
+ s32 base_adjust;
};
int intel_vsec_add_aux(struct pci_dev *pdev, struct device *parent,
--
2.44.0
next prev parent reply other threads:[~2024-06-20 21:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-20 21:20 [PATCH v2 0/6] Support PMT features in Xe Michael J. Ruhl
2024-06-20 21:20 ` [PATCH v2 1/6] platform/x86/intel/vsec.h: Move to include/linux Michael J. Ruhl
2024-06-20 21:20 ` [PATCH v2 2/6] platform/x86/intel/vsec: Add PMT read callbacks Michael J. Ruhl
2024-06-20 21:20 ` [PATCH v2 3/6] platform/x86/intel/pmt: Use PMT callbacks Michael J. Ruhl
2024-06-20 21:20 ` [PATCH v2 4/6] drm/xe/vsec: Support BMG devices Michael J. Ruhl
2024-06-20 21:20 ` Michael J. Ruhl [this message]
2024-06-20 21:20 ` [PATCH v2 6/6] drm/xe/vsec: Add support for DG2 Michael J. Ruhl
2024-06-20 21:26 ` ✓ CI.Patch_applied: success for Support PMT features in Xe (rev2) Patchwork
2024-06-20 21:26 ` ✗ CI.checkpatch: warning " Patchwork
2024-06-20 21:27 ` ✓ CI.KUnit: success " Patchwork
2024-06-20 21:40 ` ✓ CI.Build: " Patchwork
2024-06-20 21:43 ` ✗ CI.Hooks: failure " Patchwork
2024-06-20 21:46 ` ✓ CI.checksparse: success " Patchwork
2024-06-20 22:08 ` ✓ CI.BAT: " Patchwork
2024-06-21 0:05 ` ✗ CI.FULL: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240620212055.3314064-6-michael.j.ruhl@intel.com \
--to=michael.j.ruhl@intel.com \
--cc=david.e.box@linux.intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=pavel.e.popov@intel.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox