From: Tomasz Lis <tomasz.lis@intel.com>
To: intel-xe@lists.freedesktop.org
Cc: "Michał Winiarski" <michal.winiarski@intel.com>,
"Michał Wajdeczko" <michal.wajdeczko@intel.com>
Subject: [PATCH v2 3/4] drm/xe/vf: Start post-migration fixups with provisinoning query
Date: Tue, 24 Sep 2024 22:25:52 +0200 [thread overview]
Message-ID: <20240924202553.1541574-4-tomasz.lis@intel.com> (raw)
In-Reply-To: <20240924202553.1541574-1-tomasz.lis@intel.com>
During post-migration recovery, only MMIO communication to GuC is
allowed. The VF KMD needs to use that channel to ask for the new
provisioning, which includes a new GGTT range assigned to the VF.
v2: query config only instead of handshake; no need to get pm ref as
it's now kept through whole recovery (mwajdeczko)
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
---
drivers/gpu/drm/xe/xe_sriov_vf.c | 39 ++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/drivers/gpu/drm/xe/xe_sriov_vf.c b/drivers/gpu/drm/xe/xe_sriov_vf.c
index d0c5a0b7e170..fe5eefa736c8 100644
--- a/drivers/gpu/drm/xe/xe_sriov_vf.c
+++ b/drivers/gpu/drm/xe/xe_sriov_vf.c
@@ -24,6 +24,34 @@ void xe_sriov_vf_init_early(struct xe_device *xe)
INIT_WORK(&xe->sriov.vf.migration.worker, migration_worker_func);
}
+/**
+ * vf_post_migration_requery_guc - Re-initialize GuC communication.
+ * @xe: the &xe_device struct instance
+ *
+ * After migration, we need to reestablish communication with GuC and
+ * re-query all VF configuration to make sure they match previous
+ * provisioning. Note that most of VF provisioning shall be the same,
+ * except GGTT range, since GGTT is not virtualized per-VF.
+ *
+ * Returns: 0 if the operation completed successfully, or a negative error
+ * code otherwise.
+ */
+static int vf_post_migration_requery_guc(struct xe_device *xe)
+{
+ struct xe_gt *gt;
+ unsigned int id;
+ int err, ret;
+
+ err = 0;
+ for_each_gt(gt, xe, id) {
+ ret = xe_gt_sriov_vf_query_config(gt);
+ if (!err)
+ err = ret;
+ }
+
+ return err;
+}
+
/*
* vf_post_migration_notify_resfix_done - Notify all GuCs about resource fixups apply finished.
* @xe: the &xe_device struct instance
@@ -44,12 +72,23 @@ static void vf_post_migration_notify_resfix_done(struct xe_device *xe)
static void vf_post_migration_recovery(struct xe_device *xe)
{
+ int err;
+
drm_dbg(&xe->drm, "migration recovery in progress\n");
xe_pm_runtime_get(xe);
+ err = vf_post_migration_requery_guc(xe);
+ if (unlikely(err))
+ goto fail;
+
/* FIXME: add the recovery steps */
vf_post_migration_notify_resfix_done(xe);
xe_pm_runtime_put(xe);
drm_notice(&xe->drm, "migration recovery ended\n");
+ return;
+fail:
+ xe_pm_runtime_put(xe);
+ drm_err(&xe->drm, "migration recovery failed (%pe)\n", ERR_PTR(err));
+ xe_device_declare_wedged(xe);
}
static void migration_worker_func(struct work_struct *w)
--
2.25.1
next prev parent reply other threads:[~2024-09-24 20:26 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-24 20:25 [PATCH v2 0/4] drm/xe/vf: Post-migration recovery worker basis Tomasz Lis
2024-09-24 20:25 ` [PATCH v2 1/4] drm/xe/vf: React to MIGRATED interrupt Tomasz Lis
2024-09-26 14:05 ` Michal Wajdeczko
2024-09-26 21:22 ` Lis, Tomasz
2024-09-24 20:25 ` [PATCH v2 2/4] drm/xe/vf: Send RESFIX_DONE message at end of VF restore Tomasz Lis
2024-09-24 20:25 ` Tomasz Lis [this message]
2024-09-26 14:27 ` [PATCH v2 3/4] drm/xe/vf: Start post-migration fixups with provisinoning query Michal Wajdeczko
2024-09-26 21:32 ` Lis, Tomasz
2024-09-24 20:25 ` [PATCH v2 4/4] drm/xe/vf: Defer fixups if migrated twice fast Tomasz Lis
2024-09-26 14:35 ` Michal Wajdeczko
2024-09-26 21:48 ` Lis, Tomasz
2024-09-26 5:16 ` ✓ CI.Patch_applied: success for drm/xe/vf: Post-migration recovery worker basis (rev2) Patchwork
2024-09-26 5:16 ` ✗ CI.checkpatch: warning " Patchwork
2024-09-26 5:18 ` ✓ CI.KUnit: success " Patchwork
2024-09-26 5:23 ` ✗ CI.Build: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240924202553.1541574-4-tomasz.lis@intel.com \
--to=tomasz.lis@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=michal.wajdeczko@intel.com \
--cc=michal.winiarski@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox