Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: [PATCH v2 06/11] drm/i915/ddi: Simplify the port disabling via DDI_BUF_CTL
Date: Fri, 14 Feb 2025 16:19:56 +0200	[thread overview]
Message-ID: <20250214142001.552916-7-imre.deak@intel.com> (raw)
In-Reply-To: <20250214142001.552916-1-imre.deak@intel.com>

A port can be disabled only via a modeset (or during HW state
sanitization) when the port is enabled. Thus it's not required to check
the port's enabled state before disabling it. In any case if the port
happened to be disabled, the following disabling would be just a nop and
waiting for the buffer's idle state should succeed. Simplify the
disabling sequence accordingly.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c | 23 +++++------------------
 1 file changed, 5 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 68c93071720ec..1badbf207e529 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3081,17 +3081,12 @@ static void mtl_disable_ddi_buf(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	enum port port = encoder->port;
-	u32 val;
 
 	/* 3.b Clear DDI_CTL_DE Enable to 0. */
-	val = intel_de_read(dev_priv, DDI_BUF_CTL(port));
-	if (val & DDI_BUF_CTL_ENABLE) {
-		val &= ~DDI_BUF_CTL_ENABLE;
-		intel_de_write(dev_priv, DDI_BUF_CTL(port), val);
+	intel_de_rmw(dev_priv, DDI_BUF_CTL(port), DDI_BUF_CTL_ENABLE, 0);
 
-		/* 3.c Poll for PORT_BUF_CTL Idle Status == 1, timeout after 100us */
-		mtl_wait_ddi_buf_idle(dev_priv, port);
-	}
+	/* 3.c Poll for PORT_BUF_CTL Idle Status == 1, timeout after 100us */
+	mtl_wait_ddi_buf_idle(dev_priv, port);
 
 	/* 3.d Disable D2D Link */
 	mtl_ddi_disable_d2d_link(encoder);
@@ -3108,15 +3103,8 @@ static void disable_ddi_buf(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	enum port port = encoder->port;
-	bool wait = false;
-	u32 val;
 
-	val = intel_de_read(dev_priv, DDI_BUF_CTL(port));
-	if (val & DDI_BUF_CTL_ENABLE) {
-		val &= ~DDI_BUF_CTL_ENABLE;
-		intel_de_write(dev_priv, DDI_BUF_CTL(port), val);
-		wait = true;
-	}
+	intel_de_rmw(dev_priv, DDI_BUF_CTL(port), DDI_BUF_CTL_ENABLE, 0);
 
 	if (intel_crtc_has_dp_encoder(crtc_state))
 		intel_de_rmw(dev_priv, dp_tp_ctl_reg(encoder, crtc_state),
@@ -3124,8 +3112,7 @@ static void disable_ddi_buf(struct intel_encoder *encoder,
 
 	intel_ddi_disable_fec(encoder, crtc_state);
 
-	if (wait)
-		intel_wait_ddi_buf_idle(dev_priv, port);
+	intel_wait_ddi_buf_idle(dev_priv, port);
 }
 
 static void intel_disable_ddi_buf(struct intel_encoder *encoder,
-- 
2.44.2


  parent reply	other threads:[~2025-02-14 14:19 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-14 14:19 [PATCH v2 00/11] drm/i915/ddi: Fix/simplify port enabling/disabling Imre Deak
2025-02-14 14:19 ` [PATCH v2 01/11] drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro Imre Deak
2025-02-14 14:19 ` [PATCH v2 02/11] drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL Imre Deak
2025-02-14 14:19 ` [PATCH v2 03/11] drm/i915/ddi: Make all the PORT_WIDTH macros work the same way Imre Deak
2025-02-14 14:19 ` [PATCH v2 04/11] drm/i915/ddi: Set missing TC DP PHY lane stagger delay in DDI_BUF_CTL Imre Deak
2025-02-14 14:19 ` [PATCH v2 05/11] drm/i915/ddi: Simplify the port enabling via DDI_BUF_CTL Imre Deak
2025-02-14 14:19 ` Imre Deak [this message]
2025-02-14 14:19 ` [PATCH v2 07/11] drm/i915/ddi: Simplify waiting for a port to get active/idle " Imre Deak
2025-02-14 14:19 ` [PATCH v2 08/11] drm/i915/ddi: Move platform checks within mtl_ddi_enable/disable_d2d_link() Imre Deak
2025-02-14 14:19 ` [PATCH v2 09/11] drm/i915/ddi: Unify the platform specific functions disabling a port Imre Deak
2025-02-14 14:20 ` [PATCH v2 10/11] drm/i915/ddi: Add a helper to enable " Imre Deak
2025-02-14 14:20 ` [PATCH v2 11/11] drm/i915/ddi: Sanitize DDI_BUF_CTL register definitions Imre Deak
2025-02-14 15:09 ` ✓ CI.Patch_applied: success for drm/i915/ddi: Fix/simplify port enabling/disabling (rev2) Patchwork
2025-02-14 15:09 ` ✗ CI.checkpatch: warning " Patchwork
2025-02-14 15:10 ` ✓ CI.KUnit: success " Patchwork
2025-02-14 15:27 ` ✓ CI.Build: " Patchwork
2025-02-14 15:29 ` ✓ CI.Hooks: " Patchwork
2025-02-14 15:31 ` ✗ CI.checksparse: warning " Patchwork
2025-02-14 15:37 ` [PATCH v2 00/11] drm/i915/ddi: Fix/simplify port enabling/disabling Jani Nikula
2025-02-14 15:50 ` ✓ Xe.CI.BAT: success for drm/i915/ddi: Fix/simplify port enabling/disabling (rev2) Patchwork
2025-02-15 14:55 ` ✗ Xe.CI.Full: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250214142001.552916-7-imre.deak@intel.com \
    --to=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox