[PATCH] drm/i915/dp_mst: Fix encoder HW state readout for UHBR MST

[Imre Deak <imre.deak@intel.com>]

The encoder HW/SW state verification should use a SW state which stays
unchanged while the encoder/output is active. The intel_dp::is_mst flag
used during state computation to choose between the DP SST/MST modes can
change while the output is active, if the sink gets disconnected or the
MST topology is removed for another reason. A subsequent state
verification using intel_dp::is_mst leads then to a mismatch if the
output is disabled/re-enabled without recomputing its state.

Use the encoder's active MST link count instead, which will be always
non-zero for an active MST output and will be zero for SST.

Fixes: 35d2e4b75649 ("drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout")
Fixes: 40d489fac0e8 ("drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()")
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 7937f4de66cb4..8c8b53414da67 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -890,7 +890,7 @@ static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
 			    encoder->base.base.id, encoder->base.name);
 
 	if (!mst_pipe_mask && dp128b132b_pipe_mask) {
-		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+		struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
 
 		/*
 		 * If we don't have 8b/10b MST, but have more than one
@@ -902,7 +902,8 @@ static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
 		 * we don't expect MST to have been enabled at that point, and
 		 * can assume it's SST.
 		 */
-		if (hweight8(dp128b132b_pipe_mask) > 1 || intel_dp->is_mst)
+		if (hweight8(dp128b132b_pipe_mask) > 1 ||
+		    intel_dp_mst_encoder_active_links(dig_port))
 			mst_pipe_mask = dp128b132b_pipe_mask;
 	}
 
@@ -4131,13 +4132,13 @@ static void intel_ddi_read_func_ctl(struct intel_encoder *encoder,
 	} else if (ddi_mode == TRANS_DDI_MODE_SELECT_DP_MST) {
 		intel_ddi_read_func_ctl_dp_mst(encoder, pipe_config, ddi_func_ctl);
 	} else if (ddi_mode == TRANS_DDI_MODE_SELECT_FDI_OR_128B132B && HAS_DP20(display)) {
-		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+		struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
 
 		/*
 		 * If this is true, we know we're being called from mst stream
 		 * encoder's ->get_config().
 		 */
-		if (intel_dp->is_mst)
+		if (intel_dp_mst_encoder_active_links(dig_port))
 			intel_ddi_read_func_ctl_dp_mst(encoder, pipe_config, ddi_func_ctl);
 		else
 			intel_ddi_read_func_ctl_dp_sst(encoder, pipe_config, ddi_func_ctl);
-- 
2.44.2