From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Subject: [PATCH 5/5] drm/i915/crt: Use intel_hpd_suspend/resume() instead of intel_hpd_disable/enable()
Date: Mon, 24 Feb 2025 21:31:15 +0200 [thread overview]
Message-ID: <20250224193115.2058512-6-imre.deak@intel.com> (raw)
In-Reply-To: <20250224193115.2058512-1-imre.deak@intel.com>
intel_hpd_disable/enable() have the same purpose as
intel_hpd_suspend/resume(), except that disable/enable will drop any HPD
IRQs which were triggered while the HPD was disabled, while
suspend/resume will handle such IRQs after the IRQ handling is resumed.
Use intel_hpd_suspend/resume() for crt as well, by adding a helper to
explicitly clear any pending IRQs before resuming.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_crt.c | 7 +--
drivers/gpu/drm/i915/display/intel_hotplug.c | 59 ++++++++++----------
drivers/gpu/drm/i915/display/intel_hotplug.h | 3 +-
3 files changed, 34 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
index 321580b095e7d..67b6731d7cdd2 100644
--- a/drivers/gpu/drm/i915/display/intel_crt.c
+++ b/drivers/gpu/drm/i915/display/intel_crt.c
@@ -531,8 +531,6 @@ static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
{
struct intel_display *display = to_intel_display(connector->dev);
struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector));
- struct drm_i915_private *dev_priv = to_i915(connector->dev);
- bool reenable_hpd;
u32 adpa;
bool ret;
u32 save_adpa;
@@ -549,7 +547,7 @@ static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
*
* Just disable HPD interrupts here to prevent this
*/
- reenable_hpd = intel_hpd_disable(dev_priv, crt->base.hpd_pin);
+ intel_hpd_suspend(&crt->base);
save_adpa = adpa = intel_de_read(display, crt->adpa_reg);
drm_dbg_kms(display->drm,
@@ -576,8 +574,7 @@ static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
drm_dbg_kms(display->drm,
"valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
- if (reenable_hpd)
- intel_hpd_enable(dev_priv, crt->base.hpd_pin);
+ intel_hpd_clear_and_resume(&crt->base);
return ret;
}
diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.c b/drivers/gpu/drm/i915/display/intel_hotplug.c
index 81f2be06bc2a1..501d9ff588355 100644
--- a/drivers/gpu/drm/i915/display/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/display/intel_hotplug.c
@@ -1008,33 +1008,6 @@ void intel_hpd_cancel_work(struct drm_i915_private *dev_priv)
drm_dbg_kms(&dev_priv->drm, "Hotplug detection work still active\n");
}
-bool intel_hpd_disable(struct drm_i915_private *dev_priv, enum hpd_pin pin)
-{
- bool ret = false;
-
- if (pin == HPD_NONE)
- return false;
-
- spin_lock_irq(&dev_priv->irq_lock);
- if (dev_priv->display.hotplug.stats[pin].state == HPD_ENABLED) {
- dev_priv->display.hotplug.stats[pin].state = HPD_DISABLED;
- ret = true;
- }
- spin_unlock_irq(&dev_priv->irq_lock);
-
- return ret;
-}
-
-void intel_hpd_enable(struct drm_i915_private *dev_priv, enum hpd_pin pin)
-{
- if (pin == HPD_NONE)
- return;
-
- spin_lock_irq(&dev_priv->irq_lock);
- dev_priv->display.hotplug.stats[pin].state = HPD_ENABLED;
- spin_unlock_irq(&dev_priv->irq_lock);
-}
-
static void queue_work_for_missed_irqs(struct drm_i915_private *i915)
{
struct intel_display *display = to_intel_display(&i915->drm);
@@ -1088,7 +1061,8 @@ static void queue_work_for_missed_irqs(struct drm_i915_private *i915)
* userspace connector probing, or DRM core's connector polling.
*
* A nested call of this function on the same encoder is not allowed. The call
- * must be followed by calling intel_hpd_resume().
+ * must be followed by calling intel_hpd_resume(), or
+ * intel_hpd_clear_and_resume().
*
* Note that the handling of HPD IRQs for another encoder using the same HPD
* pin as that of @encoder will be also suspended.
@@ -1148,6 +1122,35 @@ void intel_hpd_resume(struct intel_encoder *encoder)
spin_unlock_irq(&i915->irq_lock);
}
+/**
+ * intel_hpd_clear_and_resume - Resume handling of new HPD IRQs on an HPD pin
+ * @encoder: Encoder to resume the HPD handling for
+ *
+ * Resume the handling of HPD IRQs on the HPD pin of @encoder, which was
+ * previously suspended by intel_hpd_suspend(). Any HPD IRQ raised on the
+ * HPD pin while it was suspended will be cleared, handling only new IRQs.
+ */
+void intel_hpd_clear_and_resume(struct intel_encoder *encoder)
+{
+ struct intel_display *display = to_intel_display(encoder);
+ struct drm_i915_private *i915 = to_i915(display->drm);
+ struct intel_hotplug *hotplug = &display->hotplug;
+
+ if (encoder->hpd_pin == HPD_NONE)
+ return;
+
+ spin_lock_irq(&i915->irq_lock);
+
+ hotplug->event_bits &= ~BIT(encoder->hpd_pin);
+ hotplug->retry_bits &= ~BIT(encoder->hpd_pin);
+ hotplug->short_port_mask &= ~BIT(encoder->port);
+ hotplug->long_port_mask &= ~BIT(encoder->port);
+
+ resume_hpd(encoder);
+
+ spin_unlock_irq(&i915->irq_lock);
+}
+
void intel_hpd_enable_detection_work(struct drm_i915_private *i915)
{
spin_lock_irq(&i915->irq_lock);
diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.h b/drivers/gpu/drm/i915/display/intel_hotplug.h
index 5180731def7cc..0a4d1af0e42f1 100644
--- a/drivers/gpu/drm/i915/display/intel_hotplug.h
+++ b/drivers/gpu/drm/i915/display/intel_hotplug.h
@@ -26,10 +26,9 @@ void intel_hpd_init(struct drm_i915_private *dev_priv);
void intel_hpd_init_early(struct drm_i915_private *i915);
void intel_hpd_cancel_work(struct drm_i915_private *dev_priv);
enum hpd_pin intel_hpd_pin_default(enum port port);
-bool intel_hpd_disable(struct drm_i915_private *dev_priv, enum hpd_pin pin);
-void intel_hpd_enable(struct drm_i915_private *dev_priv, enum hpd_pin pin);
void intel_hpd_suspend(struct intel_encoder *encoder);
void intel_hpd_resume(struct intel_encoder *encoder);
+void intel_hpd_clear_and_resume(struct intel_encoder *encoder);
void intel_hpd_debugfs_register(struct drm_i915_private *i915);
void intel_hpd_enable_detection_work(struct drm_i915_private *i915);
--
2.44.2
next prev parent reply other threads:[~2025-02-24 19:30 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-24 19:31 [PATCH 0/5] drm/dp: Fix link training interrupted by HPD pulse Imre Deak
2025-02-24 19:31 ` [PATCH 1/5] drm/i915/hpd: Let an HPD pin be in the disabled state when handling missed IRQs Imre Deak
2025-02-24 19:31 ` [PATCH 2/5] drm/i915/hpd: Add support for suspending the IRQ handling on an HPD pin Imre Deak
2025-02-25 12:15 ` [PATCH v2 " Imre Deak
2025-02-25 16:25 ` Jani Nikula
2025-02-25 17:15 ` Imre Deak
2025-02-24 19:31 ` [PATCH 3/5] drm/i915/dp: Fix link training interrupted by a short HPD pulse Imre Deak
2025-02-24 19:31 ` [PATCH 4/5] drm/i915/dp: Queue a link check after link training is complete Imre Deak
2025-02-24 19:31 ` Imre Deak [this message]
2025-02-25 12:15 ` [PATCH v2 5/5] drm/i915/crt: Use intel_hpd_suspend/resume() instead of intel_hpd_disable/enable() Imre Deak
2025-02-25 1:54 ` ✓ CI.Patch_applied: success for drm/dp: Fix link training interrupted by HPD pulse Patchwork
2025-02-25 1:54 ` ✓ CI.checkpatch: " Patchwork
2025-02-25 1:56 ` ✓ CI.KUnit: " Patchwork
2025-02-25 2:12 ` ✓ CI.Build: " Patchwork
2025-02-25 2:14 ` ✓ CI.Hooks: " Patchwork
2025-02-25 2:16 ` ✗ CI.checksparse: warning " Patchwork
2025-02-25 2:35 ` ✓ Xe.CI.BAT: success " Patchwork
2025-02-25 6:13 ` ✗ Xe.CI.Full: failure " Patchwork
2025-02-25 12:20 ` ✓ CI.Patch_applied: success for drm/dp: Fix link training interrupted by HPD pulse (rev3) Patchwork
2025-02-25 12:20 ` ✓ CI.checkpatch: " Patchwork
2025-02-25 12:21 ` ✓ CI.KUnit: " Patchwork
2025-02-25 12:38 ` ✓ CI.Build: " Patchwork
2025-02-25 12:40 ` ✓ CI.Hooks: " Patchwork
2025-02-25 12:42 ` ✗ CI.checksparse: warning " Patchwork
2025-02-25 12:59 ` ✓ Xe.CI.BAT: success " Patchwork
2025-02-25 19:15 ` ✗ Xe.CI.Full: failure " Patchwork
2025-02-26 12:55 ` [PATCH 0/5] drm/dp: Fix link training interrupted by HPD pulse Jani Nikula
2025-02-26 13:17 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250224193115.2058512-6-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox