From: Oak Zeng <oak.zeng@intel.com>
To: intel-xe@lists.freedesktop.org
Cc: Thomas.Hellstrom@linux.intel.com, matthew.brost@intel.com,
jonathan.cavitt@intel.com
Subject: [PATCH v7 1/3] drm/xe: Introduced needs_scratch bit in device descriptor
Date: Fri, 28 Feb 2025 10:30:56 -0500 [thread overview]
Message-ID: <20250228153058.1039188-2-oak.zeng@intel.com> (raw)
In-Reply-To: <20250228153058.1039188-1-oak.zeng@intel.com>
On some platform, scratch page is needed for out of bound prefetch
to work. Introduce a bit in device descriptor to specify whether
this device needs scratch page to work.
v2: introduce a needs_scratch bit in device info (Thomas, Jonathan)
v3: drop NEEDS_SCRATCH macro (Matt)
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
---
drivers/gpu/drm/xe/xe_device_types.h | 2 ++
drivers/gpu/drm/xe/xe_pci.c | 5 +++++
2 files changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/xe/xe_device_types.h b/drivers/gpu/drm/xe/xe_device_types.h
index 833c29fed3a3..94cc93314972 100644
--- a/drivers/gpu/drm/xe/xe_device_types.h
+++ b/drivers/gpu/drm/xe/xe_device_types.h
@@ -318,6 +318,8 @@ struct xe_device {
u8 has_usm:1;
/** @info.is_dgfx: is discrete device */
u8 is_dgfx:1;
+ /** @info.needs_scratch: needs scratch page for oob prefetch to work */
+ u8 needs_scratch:1;
/**
* @info.probe_display: Probe display hardware. If set to
* false, the driver will behave as if there is no display
diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c
index 6b5fa067b39b..3e3b1cea9bce 100644
--- a/drivers/gpu/drm/xe/xe_pci.c
+++ b/drivers/gpu/drm/xe/xe_pci.c
@@ -67,6 +67,7 @@ struct xe_device_desc {
u8 has_llc:1;
u8 has_pxp:1;
u8 has_sriov:1;
+ u8 needs_scratch:1;
u8 skip_guc_pc:1;
u8 skip_mtcfg:1;
u8 skip_pcode:1;
@@ -353,6 +354,7 @@ static const struct xe_device_desc lnl_desc = {
.dma_mask_size = 46,
.has_display = true,
.has_pxp = true,
+ .needs_scratch = true,
};
static const struct xe_device_desc bmg_desc = {
@@ -361,6 +363,7 @@ static const struct xe_device_desc bmg_desc = {
.dma_mask_size = 46,
.has_display = true,
.has_heci_cscfi = 1,
+ .needs_scratch = true,
};
static const struct xe_device_desc ptl_desc = {
@@ -369,6 +372,7 @@ static const struct xe_device_desc ptl_desc = {
.has_display = true,
.has_sriov = true,
.require_force_probe = true,
+ .needs_scratch = true,
};
#undef PLATFORM
@@ -644,6 +648,7 @@ static int xe_info_init_early(struct xe_device *xe,
xe->info.skip_guc_pc = desc->skip_guc_pc;
xe->info.skip_mtcfg = desc->skip_mtcfg;
xe->info.skip_pcode = desc->skip_pcode;
+ xe->info.needs_scratch = desc->needs_scratch;
xe->info.probe_display = IS_ENABLED(CONFIG_DRM_XE_DISPLAY) &&
xe_modparam.probe_display &&
--
2.26.3
next prev parent reply other threads:[~2025-02-28 15:15 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-28 15:30 [PATCH v7 0/3] Allow scratch page under fault mode for certain platform Oak Zeng
2025-02-28 15:30 ` Oak Zeng [this message]
2025-02-28 15:30 ` [PATCH v7 2/3] drm/xe: Clear scratch page on vm_bind Oak Zeng
2025-02-28 18:44 ` Matthew Brost
2025-02-28 15:30 ` [PATCH v7 3/3] drm/xe: Allow scratch page under fault mode for certain platform Oak Zeng
2025-03-06 20:16 ` Matthew Brost
2025-03-04 6:00 ` ✓ CI.Patch_applied: success for Allow scratch page under fault mode for certain platform (rev3) Patchwork
2025-03-04 6:01 ` ✗ CI.checkpatch: warning " Patchwork
2025-03-04 6:02 ` ✓ CI.KUnit: success " Patchwork
2025-03-04 6:19 ` ✓ CI.Build: " Patchwork
2025-03-04 6:21 ` ✓ CI.Hooks: " Patchwork
2025-03-04 6:22 ` ✓ CI.checksparse: " Patchwork
2025-03-04 6:40 ` ✓ Xe.CI.BAT: " Patchwork
2025-03-04 7:41 ` ✗ Xe.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250228153058.1039188-2-oak.zeng@intel.com \
--to=oak.zeng@intel.com \
--cc=Thomas.Hellstrom@linux.intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=jonathan.cavitt@intel.com \
--cc=matthew.brost@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox