From: Imre Deak <imre.deak@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <intel-xe@lists.freedesktop.org>
Subject: [PATCH v2 5/7] drm/i915/dp_mst: Track DSC enabled status on the MST link
Date: Wed, 15 Oct 2025 19:19:32 +0300 [thread overview]
Message-ID: <20251015161934.262108-6-imre.deak@intel.com> (raw)
In-Reply-To: <20251015161934.262108-1-imre.deak@intel.com>
Track whether DSC is enabled on any CRTC on a link. On DP-SST (and DSI)
this will always match the CRTC's DSC state, those links having only a
single stream (aka CRTC). For instance, on DP-MST if DSC is enabled for
CRTC#0, but disabled for CRTC#1, the DSC/FEC state for these CRTCs will
be as follows:
CRTC#0:
- compression_enable = true
- compression_enabled_on_link = true
- fec_enable = true for 8b10b, false for 128b132b
CRTC#1:
- compression_enable = false
- compression_enabled_on_link = true
- fec_enable = true for 8b10b, false for 128b132b
This patch only sets compression_enabled_on_link for CRTC#0 above and
enables FEC on CRTC#0 if DSC was enabled on any other CRTC on the 8b10b
MST link. A follow-up change will make sure that the state of all the
CRTCs (CRTC#1 above) on an MST link is recomputed if DSC gets enabled on
any CRTC, setting compression_enabled_on_link and fec_enable for these.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_display_types.h | 2 ++
drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
drivers/gpu/drm/i915/display/intel_vdsc.c | 11 +++++++++++
drivers/gpu/drm/i915/display/intel_vdsc.h | 1 +
4 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 87b7cec35320f..58308146697ff 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1277,6 +1277,8 @@ struct intel_crtc_state {
/* Display Stream compression state */
struct {
+ /* Only used for state computation, not read out from the HW. */
+ bool compression_enabled_on_link;
bool compression_enable;
int num_streams;
/* Compressed Bpp in U6.4 format (first 4 bits for fractional part) */
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 3ffb015004c54..8ba931204cb52 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2387,7 +2387,7 @@ bool intel_dp_needs_8b10b_fec(const struct intel_crtc_state *crtc_state,
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
return false;
- return dsc_enabled_on_crtc;
+ return dsc_enabled_on_crtc || intel_dsc_enabled_on_link(crtc_state);
}
int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
index 64a1e9f0a1893..316753205ac45 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
@@ -374,9 +374,20 @@ int intel_dsc_compute_params(struct intel_crtc_state *pipe_config)
void intel_dsc_enable_on_crtc(struct intel_crtc_state *crtc_state)
{
+ crtc_state->dsc.compression_enabled_on_link = true;
crtc_state->dsc.compression_enable = true;
}
+bool intel_dsc_enabled_on_link(const struct intel_crtc_state *crtc_state)
+{
+ struct intel_display *display = to_intel_display(crtc_state);
+
+ drm_WARN_ON(display->drm, crtc_state->dsc.compression_enable &&
+ !crtc_state->dsc.compression_enabled_on_link);
+
+ return crtc_state->dsc.compression_enabled_on_link;
+}
+
enum intel_display_power_domain
intel_dsc_power_domain(struct intel_crtc *crtc, enum transcoder cpu_transcoder)
{
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.h b/drivers/gpu/drm/i915/display/intel_vdsc.h
index 240bef82d3576..9c52ece0027c3 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.h
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.h
@@ -21,6 +21,7 @@ void intel_dsc_enable(const struct intel_crtc_state *crtc_state);
void intel_dsc_disable(const struct intel_crtc_state *crtc_state);
int intel_dsc_compute_params(struct intel_crtc_state *pipe_config);
void intel_dsc_enable_on_crtc(struct intel_crtc_state *crtc_state);
+bool intel_dsc_enabled_on_link(const struct intel_crtc_state *crtc_state);
void intel_dsc_get_config(struct intel_crtc_state *crtc_state);
enum intel_display_power_domain
intel_dsc_power_domain(struct intel_crtc *crtc, enum transcoder cpu_transcoder);
--
2.49.1
next prev parent reply other threads:[~2025-10-15 16:20 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-15 16:19 [PATCH v2 0/7] drm/i915/dp: Fix panel replay in DSC mode Imre Deak
2025-10-15 16:19 ` [PATCH v2 1/7] drm/i915/dsc: Add helper to enable the DSC configuration for a CRTC Imre Deak
2025-10-16 16:39 ` Hogander, Jouni
2025-10-15 16:19 ` [PATCH v2 2/7] drm/i915/dp: Ensure the FEC state stays disabled for UHBR links Imre Deak
2025-10-16 16:47 ` Hogander, Jouni
2025-10-15 16:19 ` [PATCH v2 3/7] drm/i915/dp: Export helper to determine if FEC on non-UHBR links is required Imre Deak
2025-10-16 16:56 ` Hogander, Jouni
2025-10-16 17:18 ` Imre Deak
2025-10-16 18:23 ` Hogander, Jouni
2025-10-16 20:00 ` Imre Deak
2025-10-17 4:00 ` Hogander, Jouni
2025-10-15 16:19 ` [PATCH v2 4/7] drm/i915/dp_mst: Reuse the DP-SST helper function to compute FEC config Imre Deak
2025-10-16 16:58 ` Hogander, Jouni
2025-10-15 16:19 ` Imre Deak [this message]
2025-10-16 17:01 ` [PATCH v2 5/7] drm/i915/dp_mst: Track DSC enabled status on the MST link Hogander, Jouni
2025-10-15 16:19 ` [PATCH v2 6/7] drm/i915/dp_mst: Recompute all MST link CRTCs if DSC gets enabled on the link Imre Deak
2025-10-16 17:04 ` Hogander, Jouni
2025-10-15 16:19 ` [PATCH v2 7/7] drm/i915/dp: Fix panel replay when DSC is enabled Imre Deak
2025-10-16 7:06 ` Hogander, Jouni
2025-10-16 1:52 ` ✓ CI.KUnit: success for drm/i915/dp: Fix panel replay in DSC mode (rev2) Patchwork
2025-10-16 2:32 ` ✓ Xe.CI.BAT: " Patchwork
2025-10-16 19:42 ` ✓ Xe.CI.Full: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251015161934.262108-6-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox