From: Matthew Brost <matthew.brost@intel.com>
To: intel-xe@lists.freedesktop.org
Cc: francois.dugast@intel.com, thomas.hellstrom@linux.intel.com,
michal.mrozek@intel.com
Subject: [PATCH v2 6/7] drm/xe: Add GT stats ktime helpers
Date: Fri, 12 Dec 2025 10:28:46 -0800 [thread overview]
Message-ID: <20251212182847.1683222-7-matthew.brost@intel.com> (raw)
In-Reply-To: <20251212182847.1683222-1-matthew.brost@intel.com>
Normalize GT stats that record execution periods in code paths by
adding helpers to perform the ktime calculation. Use these helpers in
the SVM code.
Suggested-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
---
drivers/gpu/drm/xe/xe_gt_stats.h | 33 +++++++++++++++++++++++++++++++-
drivers/gpu/drm/xe/xe_svm.c | 29 +++++++++-------------------
2 files changed, 41 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/xe/xe_gt_stats.h b/drivers/gpu/drm/xe/xe_gt_stats.h
index e8aea32bc971..456782f23f39 100644
--- a/drivers/gpu/drm/xe/xe_gt_stats.h
+++ b/drivers/gpu/drm/xe/xe_gt_stats.h
@@ -6,6 +6,8 @@
#ifndef _XE_GT_STATS_H_
#define _XE_GT_STATS_H_
+#include <linux/ktime.h>
+
#include "xe_gt_stats_types.h"
struct xe_gt;
@@ -21,6 +23,35 @@ xe_gt_stats_incr(struct xe_gt *gt, const enum xe_gt_stats_id id,
int incr)
{
}
-
#endif
+
+/**
+ * xe_gt_stats_ktime_us_delta() - Get delta in microseconds between now and a
+ * start time
+ * @start: Start time
+ *
+ * Helper for GT stats to get delta in microseconds between now and a start
+ * time, compiles out if GT stats are disabled.
+ *
+ * Return: Delta in microseconds between now and a start time
+ */
+static inline s64 xe_gt_stats_ktime_us_delta(ktime_t start)
+{
+ return IS_ENABLED(CONFIG_DEBUG_FS) ?
+ ktime_us_delta(ktime_get(), start) : 0;
+}
+
+/**
+ * xe_gt_stats_ktime_get() - Get current ktime
+ *
+ * Helper for GT stats to get current ktime, compiles out if GT stats are
+ * disabled.
+ *
+ * Return: Get current ktime
+ */
+static inline ktime_t xe_gt_stats_ktime_get(void)
+{
+ return IS_ENABLED(CONFIG_DEBUG_FS) ? ktime_get() : 0;
+}
+
#endif
diff --git a/drivers/gpu/drm/xe/xe_svm.c b/drivers/gpu/drm/xe/xe_svm.c
index 46977ec1e0de..93550c7c84ac 100644
--- a/drivers/gpu/drm/xe/xe_svm.c
+++ b/drivers/gpu/drm/xe/xe_svm.c
@@ -176,24 +176,13 @@ xe_svm_range_notifier_event_end(struct xe_vm *vm, struct drm_gpusvm_range *r,
mmu_range);
}
-static s64 xe_svm_stats_ktime_us_delta(ktime_t start)
-{
- return IS_ENABLED(CONFIG_DEBUG_FS) ?
- ktime_us_delta(ktime_get(), start) : 0;
-}
-
static void xe_svm_tlb_inval_us_stats_incr(struct xe_gt *gt, ktime_t start)
{
- s64 us_delta = xe_svm_stats_ktime_us_delta(start);
+ s64 us_delta = xe_gt_stats_ktime_us_delta(start);
xe_gt_stats_incr(gt, XE_GT_STATS_ID_SVM_TLB_INVAL_US, us_delta);
}
-static ktime_t xe_svm_stats_ktime_get(void)
-{
- return IS_ENABLED(CONFIG_DEBUG_FS) ? ktime_get() : 0;
-}
-
static void xe_svm_invalidate(struct drm_gpusvm *gpusvm,
struct drm_gpusvm_notifier *notifier,
const struct mmu_notifier_range *mmu_range)
@@ -202,7 +191,7 @@ static void xe_svm_invalidate(struct drm_gpusvm *gpusvm,
struct xe_device *xe = vm->xe;
struct drm_gpusvm_range *r, *first;
struct xe_tile *tile;
- ktime_t start = xe_svm_stats_ktime_get();
+ ktime_t start = xe_gt_stats_ktime_get();
u64 adj_start = mmu_range->start, adj_end = mmu_range->end;
u8 tile_mask = 0, id;
long err;
@@ -442,7 +431,7 @@ static void xe_svm_copy_us_stats_incr(struct xe_gt *gt,
unsigned long npages,
ktime_t start)
{
- s64 us_delta = xe_svm_stats_ktime_us_delta(start);
+ s64 us_delta = xe_gt_stats_ktime_us_delta(start);
if (dir == XE_SVM_COPY_TO_VRAM) {
switch (npages) {
@@ -494,7 +483,7 @@ static int xe_svm_copy(struct page **pages,
u64 vram_addr = XE_VRAM_ADDR_INVALID;
int err = 0, pos = 0;
bool sram = dir == XE_SVM_COPY_TO_SRAM;
- ktime_t start = xe_svm_stats_ktime_get();
+ ktime_t start = xe_gt_stats_ktime_get();
/*
* This flow is complex: it locates physically contiguous device pages,
@@ -986,7 +975,7 @@ static void xe_svm_range_##elem##_us_stats_incr(struct xe_gt *gt, \
struct xe_svm_range *range, \
ktime_t start) \
{ \
- s64 us_delta = xe_svm_stats_ktime_us_delta(start); \
+ s64 us_delta = xe_gt_stats_ktime_us_delta(start); \
\
switch (xe_svm_range_size(range)) { \
case SZ_4K: \
@@ -1031,7 +1020,7 @@ static int __xe_svm_handle_pagefault(struct xe_vm *vm, struct xe_vma *vma,
struct drm_pagemap *dpagemap;
struct xe_tile *tile = gt_to_tile(gt);
int migrate_try_count = ctx.devmem_only ? 3 : 1;
- ktime_t start = xe_svm_stats_ktime_get(), bind_start, get_pages_start;
+ ktime_t start = xe_gt_stats_ktime_get(), bind_start, get_pages_start;
int err;
lockdep_assert_held_write(&vm->lock);
@@ -1070,7 +1059,7 @@ static int __xe_svm_handle_pagefault(struct xe_vm *vm, struct xe_vma *vma,
if (--migrate_try_count >= 0 &&
xe_svm_range_needs_migrate_to_vram(range, vma, !!dpagemap || ctx.devmem_only)) {
- ktime_t migrate_start = xe_svm_stats_ktime_get();
+ ktime_t migrate_start = xe_gt_stats_ktime_get();
/* TODO : For multi-device dpagemap will be used to find the
* remote tile and remote device. Will need to modify
@@ -1107,7 +1096,7 @@ static int __xe_svm_handle_pagefault(struct xe_vm *vm, struct xe_vma *vma,
}
get_pages:
- get_pages_start = xe_svm_stats_ktime_get();
+ get_pages_start = xe_gt_stats_ktime_get();
range_debug(range, "GET PAGES");
err = xe_svm_range_get_pages(vm, range, &ctx);
@@ -1134,7 +1123,7 @@ static int __xe_svm_handle_pagefault(struct xe_vm *vm, struct xe_vma *vma,
xe_svm_range_get_pages_us_stats_incr(gt, range, get_pages_start);
range_debug(range, "PAGE FAULT - BIND");
- bind_start = xe_svm_stats_ktime_get();
+ bind_start = xe_gt_stats_ktime_get();
xe_validation_guard(&vctx, &vm->xe->val, &exec, (struct xe_val_flags) {}, err) {
err = xe_vm_drm_exec_lock(vm, &exec);
drm_exec_retry_on_contention(&exec);
--
2.34.1
next prev parent reply other threads:[~2025-12-12 18:29 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-12 18:28 [PATCH v2 0/7] Fix performance when pagefaults and 3d/display share resources Matthew Brost
2025-12-12 18:28 ` [PATCH v2 1/7] drm/xe: Adjust long-running workload timeslices to reasonable values Matthew Brost
2025-12-15 10:08 ` Thomas Hellström
2025-12-15 21:48 ` Matthew Brost
2025-12-12 18:28 ` [PATCH v2 2/7] drm/xe: Use usleep_range for accurate long-running workload timeslicing Matthew Brost
2025-12-15 10:10 ` Thomas Hellström
2025-12-12 18:28 ` [PATCH v2 3/7] drm/xe: Add debugfs knobs to control long running " Matthew Brost
2025-12-15 10:11 ` Thomas Hellström
2025-12-12 18:28 ` [PATCH v2 4/7] drm/xe: Skip exec queue schedule toggle if queue is idle during suspend Matthew Brost
2025-12-15 12:08 ` Thomas Hellström
2025-12-12 18:28 ` [PATCH v2 5/7] drm/xe: Wait on in-syncs when swicthing to dma-fence mode Matthew Brost
2025-12-15 10:32 ` Thomas Hellström
2025-12-15 21:46 ` Matthew Brost
2025-12-15 21:48 ` Thomas Hellström
2025-12-16 1:12 ` Matthew Brost
2025-12-12 18:28 ` Matthew Brost [this message]
2025-12-15 10:17 ` [PATCH v2 6/7] drm/xe: Add GT stats ktime helpers Thomas Hellström
2025-12-12 18:28 ` [PATCH v2 7/7] drm/xe: Add more GT stats around pagefault mode switch flows Matthew Brost
2025-12-15 11:00 ` Thomas Hellström
2025-12-15 13:05 ` Francois Dugast
2025-12-12 22:37 ` ✗ CI.checkpatch: warning for Fix performance when pagefaults and 3d/display share resources (rev2) Patchwork
2025-12-12 22:38 ` ✓ CI.KUnit: success " Patchwork
2025-12-12 23:33 ` ✓ Xe.CI.BAT: " Patchwork
2025-12-13 19:27 ` ✗ Xe.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251212182847.1683222-7-matthew.brost@intel.com \
--to=matthew.brost@intel.com \
--cc=francois.dugast@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=michal.mrozek@intel.com \
--cc=thomas.hellstrom@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox