Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: jani.nikula@linux.intel.com, ville.syrjala@linux.intel.com,
	Jerome Tollet <jerome.tollet@gmail.com>,
	Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Subject: [RESEND] drm/i915/hdmi: Poll for 200 msec for TMDS_Scrambler_Status
Date: Tue, 13 Jan 2026 19:08:45 +0530	[thread overview]
Message-ID: <20260113133845.1636774-1-ankit.k.nautiyal@intel.com> (raw)

From: Jerome Tollet <jerome.tollet@gmail.com>

As per HDMI 2.0 specification, after scrambled video transmission begins,
the source must poll the TMDS_Scrambler_Status bit until it reads 1 or
until a timeout of 200 ms.

Add a polling step after enabling the HDMI port to verify scrambling
status, following the spec requirement.

Without the wait for the scrambling bit to set, some HDMI 2.0 monitors fail
to decode the signal at 4K@60Hz (594 MHz) when SCDC scrambling is not yet
fully configured by the sink.

v2:
 - Instead of the fixed delay, poll for TMDS scramble status for 200 msec
   as per the HDMI spec. (Ankit)

Reported-by: Jerome Tollet <jerome.tollet@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6868
Link: https://lore.kernel.org/dri-devel/20251230091037.5603-1-jerome.tollet@gmail.com/
Signed-off-by: Jerome Tollet <jerome.tollet@gmail.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---

Rebased and resend to intel-gfx and intel-xe so that the patch is picked
up by intel gfx CI.

---
 drivers/gpu/drm/i915/display/intel_ddi.c  |  2 ++
 drivers/gpu/drm/i915/display/intel_hdmi.c | 25 +++++++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_hdmi.h |  2 ++
 3 files changed, 29 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index cb91d07cdaa6..c708b713f0e8 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3506,6 +3506,8 @@ static void intel_ddi_enable_hdmi(struct intel_atomic_state *state,
 	}
 
 	intel_ddi_buf_enable(encoder, buf_ctl);
+
+	intel_hdmi_poll_for_scrambling_enable(crtc_state, connector);
 }
 
 static void intel_ddi_enable(struct intel_atomic_state *state,
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 055e68810d0d..6f7dcd7365a4 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -3363,3 +3363,28 @@ intel_hdmi_dsc_get_bpp(int src_fractional_bpp, int slice_width, int num_slices,
 
 	return 0;
 }
+
+/*
+ * As Per HDMI 2.0 spec: after scrambled video transmission begins,
+ * poll TMDS_Scrambler_Status until it reads 1, for up to 200 ms.
+ */
+void
+intel_hdmi_poll_for_scrambling_enable(const struct intel_crtc_state *crtc_state,
+				      struct drm_connector *_connector)
+{
+	struct intel_connector *connector = to_intel_connector(_connector);
+	struct intel_display *display = to_intel_display(crtc_state);
+	bool scrambling_enabled = false;
+	int ret;
+
+	if (!crtc_state->hdmi_scrambling)
+		return;
+
+	/* Poll for a max of 200 msec as per HDMI spec */
+	ret = poll_timeout_us(scrambling_enabled = drm_scdc_get_scrambling_status(&connector->base),
+			      scrambling_enabled, 1000, 200 * 1000, false);
+	if (ret)
+		drm_dbg_kms(display->drm,
+			    "[CONNECTOR:%d:%s] Timed out waiting for scrambling enable\n",
+			    connector->base.base.id, connector->base.name);
+}
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.h b/drivers/gpu/drm/i915/display/intel_hdmi.h
index be2fad57e4ad..0fa3661568e8 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.h
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.h
@@ -70,5 +70,7 @@ void hsw_read_infoframe(struct intel_encoder *encoder,
 			const struct intel_crtc_state *crtc_state,
 			unsigned int type,
 			void *frame, ssize_t len);
+void intel_hdmi_poll_for_scrambling_enable(const struct intel_crtc_state *crtc_state,
+					   struct drm_connector *_connector);
 
 #endif /* __INTEL_HDMI_H__ */
-- 
2.45.2


             reply	other threads:[~2026-01-13 13:54 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-13 13:38 Ankit Nautiyal [this message]
2026-01-13 14:01 ` ✓ CI.KUnit: success for drm/i915/hdmi: Poll for 200 msec for TMDS_Scrambler_Status Patchwork
2026-01-13 14:48 ` ✓ Xe.CI.BAT: " Patchwork
2026-01-13 21:39 ` [RESEND] " Ville Syrjälä
2026-01-21 12:56   ` Nautiyal, Ankit K
2026-02-19 15:45     ` Jerome Tollet
2026-01-13 22:40 ` ✗ Xe.CI.Full: failure for " Patchwork
     [not found] <CADN_a6Ne4Vr6knCXdKtCnB8=et6OK7PEZ8F5bpyGamwyv1K9GA@mail.gmail.com>
2026-02-07  3:14 ` [RESEND] " Jérôme Tollet
2026-02-14 16:17   ` Jérôme Tollet
2026-02-17  8:14     ` Nautiyal, Ankit K

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260113133845.1636774-1-ankit.k.nautiyal@intel.com \
    --to=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=jerome.tollet@gmail.com \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox