[PATCH 02/14] drm/i915/dp: Move num_joined_pipes and related checks together

[Ankit Nautiyal <ankit.k.nautiyal@intel.com>]

Move the calculation of `num_joined_pipes` and other constraints that
depend on it, into a single block.
This groups all joiner-dependent logic together, preparing the code for a
future loop-based evaluation of multiple joiner configurations.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 32 ++++++++++++-------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 126da297efc5..c0a8ffac6312 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1472,20 +1472,9 @@ intel_dp_mode_valid(struct drm_connector *_connector,
 		target_clock = fixed_mode->clock;
 	}
 
-	num_joined_pipes = intel_dp_num_joined_pipes(intel_dp, connector,
-						     mode->hdisplay, target_clock);
-	max_dotclk *= num_joined_pipes;
-
 	sink_format = intel_dp_sink_format(connector, mode);
 	output_format = intel_dp_output_format(connector, sink_format);
 
-	status = intel_pfit_mode_valid(display, mode, output_format, num_joined_pipes);
-	if (status != MODE_OK)
-		return status;
-
-	if (target_clock > max_dotclk)
-		return MODE_CLOCK_HIGH;
-
 	max_link_clock = intel_dp_max_link_rate(intel_dp);
 	max_lanes = intel_dp_max_lane_count(intel_dp);
 
@@ -1496,6 +1485,17 @@ intel_dp_mode_valid(struct drm_connector *_connector,
 					   target_clock, mode->hdisplay,
 					   link_bpp_x16, 0);
 
+	num_joined_pipes = intel_dp_num_joined_pipes(intel_dp, connector,
+						     mode->hdisplay, target_clock);
+	max_dotclk *= num_joined_pipes;
+
+	if (target_clock > max_dotclk)
+		return MODE_CLOCK_HIGH;
+
+	status = intel_pfit_mode_valid(display, mode, output_format, num_joined_pipes);
+	if (status != MODE_OK)
+		return status;
+
 	if (intel_dp_has_dsc(connector)) {
 		int pipe_bpp;
 
@@ -1538,14 +1538,14 @@ intel_dp_mode_valid(struct drm_connector *_connector,
 	if (intel_dp_joiner_needs_dsc(display, num_joined_pipes) && !dsc)
 		return MODE_CLOCK_HIGH;
 
+	status = intel_mode_valid_max_plane_size(display, mode, num_joined_pipes);
+	if (status != MODE_OK)
+		return status;
+
 	if (mode_rate > max_rate && !dsc)
 		return MODE_CLOCK_HIGH;
 
-	status = intel_dp_mode_valid_downstream(connector, mode, target_clock);
-	if (status != MODE_OK)
-		return status;
-
-	return intel_mode_valid_max_plane_size(display, mode, num_joined_pipes);
+	return intel_dp_mode_valid_downstream(connector, mode, target_clock);
 }
 
 bool intel_dp_source_supports_tps3(struct intel_display *display)
-- 
2.45.2