Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: jani.nikula@linux.intel.com, imre.deak@intel.com,
	Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Subject: [PATCH 14/16] drm/i915/dp: Add helpers for joiner candidate loops
Date: Wed, 28 Jan 2026 19:36:34 +0530	[thread overview]
Message-ID: <20260128140636.3527799-15-ankit.k.nautiyal@intel.com> (raw)
In-Reply-To: <20260128140636.3527799-1-ankit.k.nautiyal@intel.com>

Introduce for_each_joiner_candidate(), intel_dp_pick_joiner_candidate() and
intel_dp_joiner_candidate_valid() to remove duplicated joiner enumeration
and validity checks across DP SST and MST paths.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c     | 37 ++++++++-------------
 drivers/gpu/drm/i915/display/intel_dp.h     | 31 +++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 37 ++++++++-------------
 3 files changed, 59 insertions(+), 46 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index c1ff92367808..9eba8f90bc90 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1529,23 +1529,19 @@ intel_dp_mode_valid(struct drm_connector *_connector,
 	 * Because of this dependency cycle, the only correct approach is to iterate
 	 * over candidate pipe counts and evaluate each combination.
 	 */
-	for (num_pipes = 0; num_pipes < I915_MAX_PIPES; num_pipes++) {
+	for_each_joiner_candidate(num_pipes) {
 		int dsc_slice_count = 0;
 
 		status = MODE_CLOCK_HIGH;
 
-		if (num_pipes == 0) {
-			if (!connector->force_joined_pipes)
-				continue;
-			num_joined_pipes = connector->force_joined_pipes;
-		} else {
-			num_joined_pipes = num_pipes;
-		}
-
-		if (!intel_dp_can_join(display, num_joined_pipes))
+		if (!intel_dp_pick_joiner_candidate(num_pipes,
+						    connector->force_joined_pipes,
+						    &num_joined_pipes))
 			continue;
 
-		if (mode->hdisplay > num_joined_pipes * intel_dp_max_hdisplay_per_pipe(display))
+		if (!intel_dp_joiner_candidate_valid(display,
+						     mode->hdisplay,
+						     num_joined_pipes))
 			continue;
 
 		status = intel_pfit_mode_valid(display, mode, output_format, num_joined_pipes);
@@ -2938,20 +2934,15 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
 	    !intel_dp_supports_fec(intel_dp, connector, crtc_state))
 		return -EINVAL;
 
-	for (num_pipes = 0; num_pipes < I915_MAX_PIPES; num_pipes++) {
-		if (num_pipes == 0) {
-			if (!connector->force_joined_pipes)
-				continue;
-			num_joined_pipes = connector->force_joined_pipes;
-		} else {
-			num_joined_pipes = num_pipes;
-		}
-
-		if (!intel_dp_can_join(display, num_joined_pipes))
+	for_each_joiner_candidate(num_pipes) {
+		if (!intel_dp_pick_joiner_candidate(num_pipes,
+						    connector->force_joined_pipes,
+						    &num_joined_pipes))
 			continue;
 
-		if (adjusted_mode->hdisplay >
-		    num_joined_pipes * intel_dp_max_hdisplay_per_pipe(display))
+		if (!intel_dp_joiner_candidate_valid(display,
+						     adjusted_mode->hdisplay,
+						     num_joined_pipes))
 			continue;
 
 		/*
diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
index beef480b7672..111a5d4b3992 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.h
+++ b/drivers/gpu/drm/i915/display/intel_dp.h
@@ -234,4 +234,35 @@ bool intel_dp_dotclk_valid(struct intel_display *display,
 			   int dsc_slice_count,
 			   int num_joined_pipes);
 
+#define for_each_joiner_candidate(__num_pipes) \
+	for ((__num_pipes) = 0; (__num_pipes) < (I915_MAX_PIPES); (__num_pipes)++)
+
+static inline bool intel_dp_pick_joiner_candidate(int num_pipes,
+						  int force_joined_pipes,
+						  int *num_joined_pipes)
+{
+	if (num_pipes == 0) {
+		if (!force_joined_pipes)
+			return false;
+		*num_joined_pipes = force_joined_pipes;
+	} else {
+		*num_joined_pipes = num_pipes;
+	}
+
+	return true;
+}
+
+static inline bool intel_dp_joiner_candidate_valid(struct intel_display *display,
+						   int hdisplay,
+						   int num_joined_pipes)
+{
+	if (!intel_dp_can_join(display, num_joined_pipes))
+		return false;
+
+	if (hdisplay > num_joined_pipes * intel_dp_max_hdisplay_per_pipe(display))
+		return false;
+
+	return true;
+}
+
 #endif /* __INTEL_DP_H__ */
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index bdf2f09fa03e..005efcb5d2bf 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -701,24 +701,19 @@ static int mst_stream_compute_config(struct intel_encoder *encoder,
 	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	pipe_config->has_pch_encoder = false;
 
-	for (num_pipes = 0; num_pipes < I915_MAX_PIPES; num_pipes++) {
+	for_each_joiner_candidate(num_pipes) {
 		int dsc_slice_count = 0;
 
 		ret = -EINVAL;
 
-		if (num_pipes == 0) {
-			if (!connector->force_joined_pipes)
-				continue;
-			num_joined_pipes = connector->force_joined_pipes;
-		} else {
-			num_joined_pipes = num_pipes;
-		}
-
-		if (!intel_dp_can_join(display, num_joined_pipes))
+		if (!intel_dp_pick_joiner_candidate(num_pipes,
+						    connector->force_joined_pipes,
+						    &num_joined_pipes))
 			continue;
 
-		if (adjusted_mode->hdisplay >
-		    num_joined_pipes * intel_dp_max_hdisplay_per_pipe(display))
+		if (!intel_dp_joiner_candidate_valid(display,
+						     adjusted_mode->hdisplay,
+						     num_joined_pipes))
 			continue;
 
 		if (num_joined_pipes > 1)
@@ -1535,23 +1530,19 @@ mst_connector_mode_valid_ctx(struct drm_connector *_connector,
 		return 0;
 	}
 
-	for (num_pipes = 0; num_pipes < I915_MAX_PIPES; num_pipes++) {
+	for_each_joiner_candidate(num_pipes) {
 		int dsc_slice_count = 0;
 
 		*status = MODE_CLOCK_HIGH;
 
-		if (num_pipes == 0) {
-			if (!connector->force_joined_pipes)
-				continue;
-			num_joined_pipes = connector->force_joined_pipes;
-		} else {
-			num_joined_pipes = num_pipes;
-		}
-
-		if (!intel_dp_can_join(display, num_joined_pipes))
+		if (!intel_dp_pick_joiner_candidate(num_pipes,
+						    connector->force_joined_pipes,
+						    &num_joined_pipes))
 			continue;
 
-		if (mode->hdisplay > num_joined_pipes * intel_dp_max_hdisplay_per_pipe(display))
+		if (!intel_dp_joiner_candidate_valid(display,
+						     mode->hdisplay,
+						     num_joined_pipes))
 			continue;
 
 		if (intel_dp_has_dsc(connector) &&
-- 
2.45.2


  parent reply	other threads:[~2026-01-28 14:23 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-28 14:06 [PATCH 00/16] Account for DSC bubble overhead for horizontal slices Ankit Nautiyal
2026-01-28 14:06 ` [PATCH 01/16] drm/i915/dp: Early reject bad hdisplay in intel_dp_mode_valid Ankit Nautiyal
2026-01-28 14:06 ` [PATCH 02/16] drm/i915/dp: Move num_joined_pipes and related checks together Ankit Nautiyal
2026-01-28 14:06 ` [PATCH 03/16] drm/i915/dp: Extract helper to get the hdisplay limit Ankit Nautiyal
2026-01-28 14:06 ` [PATCH 04/16] drm/i915/dp: Rework pipe joiner logic in mode_valid Ankit Nautiyal
2026-01-28 16:46   ` Imre Deak
2026-01-29  5:21     ` Nautiyal, Ankit K
2026-01-29  5:48       ` Nautiyal, Ankit K
2026-01-29  9:24         ` Imre Deak
2026-01-29 10:01           ` Nautiyal, Ankit K
2026-01-28 14:06 ` [PATCH 05/16] drm/i915/dp: Rework pipe joiner logic in compute_config Ankit Nautiyal
2026-01-28 17:03   ` Imre Deak
2026-01-28 14:06 ` [PATCH 06/16] drm/i915/dp_mst: Move the check for dotclock at the end Ankit Nautiyal
2026-01-28 17:07   ` Imre Deak
2026-01-28 14:06 ` [PATCH 07/16] drm/i915/dp_mst: Move the joiner dependent code together Ankit Nautiyal
2026-01-28 14:06 ` [PATCH 08/16] drm/i915/dp_mst: Rework pipe joiner logic in mode_valid Ankit Nautiyal
2026-01-28 21:21   ` Imre Deak
2026-01-28 14:06 ` [PATCH 09/16] drm/i915/dp_mst: Extract helper to compute link for given joiner config Ankit Nautiyal
2026-01-28 14:06 ` [PATCH 10/16] drm/i915/dp_mst: Rework pipe joiner logic in compute_config Ankit Nautiyal
2026-01-28 22:06   ` Imre Deak
2026-01-28 22:11     ` Imre Deak
2026-01-28 14:06 ` [PATCH 11/16] drm/i915/dp: Introduce helper to check pixel rate against dotclock limits Ankit Nautiyal
2026-01-28 22:17   ` Imre Deak
2026-01-29  3:57   ` kernel test robot
2026-01-28 14:06 ` [PATCH 12/16] drm/i915/dp: Refactor dsc_slice_count handling in intel_dp_mode_valid() Ankit Nautiyal
2026-01-28 22:19   ` Imre Deak
2026-01-28 14:06 ` [PATCH 13/16] drm/i915/dp: Account for DSC slice overhead Ankit Nautiyal
2026-01-28 22:35   ` Imre Deak
2026-01-28 14:06 ` Ankit Nautiyal [this message]
2026-01-28 23:00   ` [PATCH 14/16] drm/i915/dp: Add helpers for joiner candidate loops Imre Deak
2026-01-28 14:06 ` [PATCH 15/16] drm/i915/display: Add upper limit check for pixel clock Ankit Nautiyal
2026-01-28 20:49   ` Imre Deak
2026-01-28 14:06 ` [PATCH 16/16] drm/i915/display: Extend the max dotclock limit to WCL and pre PTL platforms Ankit Nautiyal
2026-01-28 20:53   ` Imre Deak
2026-01-28 19:02 ` ✗ CI.checkpatch: warning for Account for DSC bubble overhead for horizontal slices (rev4) Patchwork
2026-01-28 19:03 ` ✓ CI.KUnit: success " Patchwork
2026-01-28 19:19 ` ✗ CI.checksparse: warning " Patchwork
2026-01-28 19:38 ` ✓ Xe.CI.BAT: success " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260128140636.3527799-15-ankit.k.nautiyal@intel.com \
    --to=ankit.k.nautiyal@intel.com \
    --cc=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox