From: Varun Gupta <varun.gupta@intel.com>
To: intel-xe@lists.freedesktop.org
Cc: stuart.summers@intel.com, matthew.d.roper@intel.com,
daniele.ceraolospurio@intel.com, himal.prasad.ghimiray@intel.com
Subject: [PATCH v2] drm/xe/guc: Skip access counter queue init for unsupported platforms
Date: Wed, 25 Feb 2026 22:17:48 +0530 [thread overview]
Message-ID: <20260225164748.2302380-1-varun.gupta@intel.com> (raw)
From: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Add a has_access_counter feature flag to the graphics IP descriptor
and skip writing parameters for the access counter queue in
guc_um_init_params(), leaving queue_params[2] zero-initialized
to signal unavailability to the GuC.
The queue_params[] array layout is fixed by firmware ABI, so we
maintain the structure with queues 0 and 1 (page fault request/response)
always configured, and queue 2 conditionally skipped based on the
has_access_counter flag.
Bspec: 59323
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Varun Gupta <varun.gupta1@intel.com>
---
v2:
- Replace platform check with has_access_counter feature flag in
graphics IP descriptor (Matt Roper)
- Add Bspec trailer (Matt Roper)
- Make commit message generic instead of CRI-specific
---
drivers/gpu/drm/xe/xe_device_types.h | 2 ++
drivers/gpu/drm/xe/xe_guc_ads.c | 11 +++++++++++
drivers/gpu/drm/xe/xe_pci.c | 4 ++++
drivers/gpu/drm/xe/xe_pci_types.h | 1 +
4 files changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/xe/xe_device_types.h b/drivers/gpu/drm/xe/xe_device_types.h
index 8f3ef836541e..78ecfd7414e8 100644
--- a/drivers/gpu/drm/xe/xe_device_types.h
+++ b/drivers/gpu/drm/xe/xe_device_types.h
@@ -151,6 +151,8 @@ struct xe_device {
/** @info.force_execlist: Forced execlist submission */
u8 force_execlist:1;
+ /** @info.has_access_counter: Device supports access counter */
+ u8 has_access_counter:1;
/** @info.has_asid: Has address space ID */
u8 has_asid:1;
/** @info.has_atomic_enable_pte_bit: Device has atomic enable PTE bit */
diff --git a/drivers/gpu/drm/xe/xe_guc_ads.c b/drivers/gpu/drm/xe/xe_guc_ads.c
index f4cbc030f4c8..81b5f01b1f65 100644
--- a/drivers/gpu/drm/xe/xe_guc_ads.c
+++ b/drivers/gpu/drm/xe/xe_guc_ads.c
@@ -819,6 +819,7 @@ static void guc_um_init_params(struct xe_guc_ads *ads)
{
u32 um_queue_offset = guc_ads_um_queues_offset(ads);
struct xe_guc *guc = ads_to_guc(ads);
+ struct xe_device *xe = ads_to_xe(ads);
u64 base_dpa;
u32 base_ggtt;
bool with_dpa;
@@ -830,6 +831,16 @@ static void guc_um_init_params(struct xe_guc_ads *ads)
base_dpa = xe_bo_main_addr(ads->bo, PAGE_SIZE) + um_queue_offset;
for (i = 0; i < GUC_UM_HW_QUEUE_MAX; ++i) {
+ /*
+ * Some platforms support USM but not access counters.
+ * Skip ACCESS_COUNTER queue initialization for such
+ * platforms, leaving queue_params[2] zero-initialized
+ * to signal unavailability to the GuC.
+ */
+ if (i == GUC_UM_HW_QUEUE_ACCESS_COUNTER &&
+ !xe->info.has_access_counter)
+ continue;
+
ads_blob_write(ads, um_init_params.queue_params[i].base_dpa,
with_dpa ? (base_dpa + (i * GUC_UM_QUEUE_SIZE)) : 0);
ads_blob_write(ads, um_init_params.queue_params[i].base_ggtt_address,
diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c
index 56a768f2cfca..3a16d89fc044 100644
--- a/drivers/gpu/drm/xe/xe_pci.c
+++ b/drivers/gpu/drm/xe/xe_pci.c
@@ -81,6 +81,7 @@ static const struct xe_graphics_desc graphics_xehpc = {
XE_HP_FEATURES,
+ .has_access_counter = 1,
.has_asid = 1,
.has_atomic_enable_pte_bit = 1,
.has_usm = 1,
@@ -98,6 +99,7 @@ static const struct xe_graphics_desc graphics_xelpg = {
};
#define XE2_GFX_FEATURES \
+ .has_access_counter = 1, \
.has_asid = 1, \
.has_atomic_enable_pte_bit = 1, \
.has_range_tlb_inval = 1, \
@@ -123,6 +125,7 @@ static const struct xe_graphics_desc graphics_xe3p_lpg = {
static const struct xe_graphics_desc graphics_xe3p_xpc = {
XE2_GFX_FEATURES,
+ .has_access_counter = 0,
.has_indirect_ring_state = 1,
.hw_engine_mask =
GENMASK(XE_HW_ENGINE_BCS8, XE_HW_ENGINE_BCS1) |
@@ -923,6 +926,7 @@ static int xe_info_init(struct xe_device *xe,
media_desc = NULL;
}
+ xe->info.has_access_counter = graphics_desc->has_access_counter;
xe->info.has_asid = graphics_desc->has_asid;
xe->info.has_atomic_enable_pte_bit = graphics_desc->has_atomic_enable_pte_bit;
if (xe->info.platform != XE_PVC)
diff --git a/drivers/gpu/drm/xe/xe_pci_types.h b/drivers/gpu/drm/xe/xe_pci_types.h
index 470d31a1f0d6..658cb30de50d 100644
--- a/drivers/gpu/drm/xe/xe_pci_types.h
+++ b/drivers/gpu/drm/xe/xe_pci_types.h
@@ -69,6 +69,7 @@ struct xe_graphics_desc {
u8 num_geometry_xecore_fuse_regs;
u8 num_compute_xecore_fuse_regs;
+ u8 has_access_counter:1;
u8 has_asid:1;
u8 has_atomic_enable_pte_bit:1;
u8 has_indirect_ring_state:1;
--
2.43.0
next reply other threads:[~2026-02-25 16:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-25 16:47 Varun Gupta [this message]
2026-02-25 18:19 ` ✓ CI.KUnit: success for drm/xe/guc: Skip access counter queue init for unsupported platforms Patchwork
2026-02-25 18:56 ` ✗ Xe.CI.BAT: failure " Patchwork
2026-03-02 5:40 ` Gupta, Varun
2026-02-25 21:34 ` ✗ Xe.CI.FULL: " Patchwork
2026-03-02 5:39 ` Gupta, Varun
2026-02-27 18:31 ` [PATCH v2] " Matt Roper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260225164748.2302380-1-varun.gupta@intel.com \
--to=varun.gupta@intel.com \
--cc=daniele.ceraolospurio@intel.com \
--cc=himal.prasad.ghimiray@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=matthew.d.roper@intel.com \
--cc=stuart.summers@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox