Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org, ankit.k.nautiyal@intel.com,
	chaitanya.kumar.borah@intel.com
Subject: [PATCH v2 02/11] drm/i915/vrr: compute CMRR fractional timings generically
Date: Tue, 16 Jun 2026 20:12:23 +0530	[thread overview]
Message-ID: <20260616144233.832276-3-mitulkumar.ajitkumar.golani@intel.com> (raw)
In-Reply-To: <20260616144233.832276-1-mitulkumar.ajitkumar.golani@intel.com>

Replace the disabled, eDP-only, fractional-CMRR code
with a generic, transcoder-agnostic computation driven by an
explicit per-CRTC target. Compute CMRR_M and CMRR_N timings
based on video mode reqirement if CMRR is required to be enabled.

Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
---
 .../drm/i915/display/intel_display_types.h    |   2 +
 drivers/gpu/drm/i915/display/intel_vrr.c      | 121 +++++++++---------
 2 files changed, 63 insertions(+), 60 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 897a1ffd7b79..39e11362630c 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1548,6 +1548,8 @@ struct intel_crtc {
 	struct {
 		u32 numerator;
 		u32 denominator;
+		/* Derived during atomic check: 1000/1001 video timing required */
+		bool video_mode;
 	} cmrr;
 
 	int scanline_offset;
diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
index 41118883b845..e36c0cab096a 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr.c
+++ b/drivers/gpu/drm/i915/display/intel_vrr.c
@@ -26,9 +26,6 @@
 #include "skl_prefill.h"
 #include "skl_watermark.h"
 
-#define FIXED_POINT_PRECISION		100
-#define CMRR_PRECISION_TOLERANCE	10
-
 /*
  * Tunable parameters for DC Balance correction.
  * These are captured based on experimentations.
@@ -186,69 +183,69 @@ int intel_vrr_vmax_vblank_start(const struct intel_crtc_state *crtc_state)
 	return intel_vrr_vmax_vtotal(crtc_state) - crtc_state->vrr.guardband;
 }
 
-static bool
-is_cmrr_frac_required(struct intel_crtc_state *crtc_state)
+static void
+intel_vrr_cmrr_compute_config(struct intel_crtc_state *crtc_state)
 {
 	struct intel_display *display = to_intel_display(crtc_state);
-	int calculated_refresh_k, actual_refresh_k, pixel_clock_per_line;
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
-
-	/* Avoid CMRR for now till we have VRR with fixed timings working */
-	if (!HAS_CMRR(display) || true)
-		return false;
-
-	actual_refresh_k =
-		drm_mode_vrefresh(adjusted_mode) * FIXED_POINT_PRECISION;
-	pixel_clock_per_line =
-		adjusted_mode->crtc_clock * 1000 / adjusted_mode->crtc_htotal;
-	calculated_refresh_k =
-		pixel_clock_per_line * FIXED_POINT_PRECISION / adjusted_mode->crtc_vtotal;
-
-	if ((actual_refresh_k - calculated_refresh_k) < CMRR_PRECISION_TOLERANCE)
-		return false;
-
-	return true;
-}
-
-static unsigned int
-cmrr_get_vtotal(struct intel_crtc_state *crtc_state, bool video_mode_required)
-{
-	int multiplier_m = 1, multiplier_n = 1, vtotal, desired_refresh_rate;
 	u64 adjusted_pixel_rate;
-	struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
+	int requested_refresh_rate, current_refresh_rate;
+	int multiplier_m = 1, multiplier_n = 1;
 
-	desired_refresh_rate = drm_mode_vrefresh(adjusted_mode);
+	if (!HAS_CMRR(display))
+		return;
 
-	if (video_mode_required) {
-		multiplier_m = 1001;
-		multiplier_n = 1000;
-	}
+	/* No CMRR ratio configured through debugfs */
+	if (!crtc->cmrr.numerator)
+		return;
 
-	crtc_state->cmrr.cmrr_n = mul_u32_u32(desired_refresh_rate * adjusted_mode->crtc_htotal,
-					      multiplier_n);
-	vtotal = DIV_ROUND_UP_ULL(mul_u32_u32(adjusted_mode->crtc_clock * 1000, multiplier_n),
-				  crtc_state->cmrr.cmrr_n);
-	adjusted_pixel_rate = mul_u32_u32(adjusted_mode->crtc_clock * 1000, multiplier_m);
-	crtc_state->cmrr.cmrr_m = do_div(adjusted_pixel_rate, crtc_state->cmrr.cmrr_n);
+	/*
+	 * The numerator encodes the requested refresh rate in kHz, so the
+	 * requested refresh rate in Hz is numerator / 1000. It must match the
+	 * refresh rate of the current mode.
+	 */
+	requested_refresh_rate = crtc->cmrr.numerator / 1000;
+	current_refresh_rate = drm_mode_vrefresh(adjusted_mode);
+
+	if (requested_refresh_rate != current_refresh_rate) {
+		drm_dbg_kms(display->drm,
+			    "[CRTC:%d:%s] CMRR requested refresh rate %d Hz does not match current mode refresh rate %d Hz\n",
+				crtc->base.base.id, crtc->base.name,
+				requested_refresh_rate, current_refresh_rate);
+		return;
+	}
 
-	return vtotal;
-}
+	/*
+	 * A 1:1 ratio (denominator == 1000) means no video timing is required
+	 * Any other ratio (e.g. 1000/1001) requires the video timing.
+	 */
+	crtc->cmrr.video_mode = crtc->cmrr.denominator != 1000;
+	if (crtc->cmrr.video_mode) {
+		multiplier_m = 1000;
+		multiplier_n = 1001;
+	}
 
-static
-void intel_vrr_compute_cmrr_timings(struct intel_crtc_state *crtc_state)
-{
 	/*
-	 * TODO: Compute precise target refresh rate to determine
-	 * if video_mode_required should be true. Currently set to
-	 * false due to uncertainty about the precise target
-	 * refresh Rate.
+	 * Let pixel_clock_hz = adjusted_mode->crtc_clock * 1000.
+	 *
+	 * cmrr_n = requested_refresh_rate x htotal x multiplier_m
+	 * cmrr_m = (pixel_clock_hz x scale_m) % cmrr_n
+	 *
+	 * where multiplier_m/multiplier_n = 1000/1001 when the
+	 * video timing is required, else 1/1. The integer vtotal
+	 * term is tracked in SW (it is the programmed mode vtotal)
+	 * while the fractional part represented by cmrr_m/cmrr_n
+	 * is tracked in HW.
 	 */
-	crtc_state->vrr.vmax = cmrr_get_vtotal(crtc_state, false);
-	crtc_state->vrr.vmin = crtc_state->vrr.vmax;
-	crtc_state->vrr.flipline = crtc_state->vrr.vmin;
 
-	crtc_state->cmrr.enable = true;
-	crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
+	crtc_state->cmrr.cmrr_n =
+		mul_u32_u32(requested_refresh_rate * adjusted_mode->crtc_htotal,
+			    multiplier_m);
+	adjusted_pixel_rate = mul_u32_u32(adjusted_mode->crtc_clock, 1000) * multiplier_n;
+	crtc_state->cmrr.cmrr_m = do_div(adjusted_pixel_rate, crtc_state->cmrr.cmrr_n);
+
+	return;
 }
 
 static
@@ -424,8 +421,6 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
 	struct intel_display *display = to_intel_display(crtc_state);
 	struct intel_connector *connector =
 		to_intel_connector(conn_state->connector);
-	struct intel_dp *intel_dp = intel_attached_dp(connector);
-	bool is_edp = intel_dp_is_edp(intel_dp);
 	struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
 	int vmin, vmax;
 
@@ -459,13 +454,19 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
 		vmax = vmin;
 	}
 
-	if (crtc_state->uapi.vrr_enabled && vmin < vmax)
+	if (crtc_state->uapi.vrr_enabled && vmin < vmax) {
 		intel_vrr_compute_vrr_timings(crtc_state, vmin, vmax);
-	else if (is_cmrr_frac_required(crtc_state) && is_edp)
-		intel_vrr_compute_cmrr_timings(crtc_state);
-	else
+	} else {
 		intel_vrr_compute_fixed_rr_timings(crtc_state);
 
+		/*
+		 * CMRR is a fixed average Vtotal mode and is only computed on
+		 * the fixed refresh rate path. It is generic across transcoders
+		 * and gated on platform support and a valid debugfs ratio.
+		 */
+		intel_vrr_cmrr_compute_config(crtc_state);
+	}
+
 	if (HAS_AS_SDP(display)) {
 		crtc_state->vrr.vsync_start =
 			(crtc_state->hw.adjusted_mode.crtc_vtotal -
-- 
2.48.1


  parent reply	other threads:[~2026-06-16 14:53 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-16 14:42 [PATCH v2 00/11] Enable CMRR in fixed-RR VRR path Mitul Golani
2026-06-16 14:42 ` [PATCH v2 01/11] drm/i915/vrr: add per-CRTC vrr/cmrr debugfs control Mitul Golani
2026-06-17 11:57   ` Jani Nikula
2026-06-16 14:42 ` Mitul Golani [this message]
2026-06-17 12:00   ` [PATCH v2 02/11] drm/i915/vrr: compute CMRR fractional timings generically Jani Nikula
2026-06-16 14:42 ` [PATCH v2 03/11] drm/i915/vrr: dump CMRR state in the crtc state dump Mitul Golani
2026-06-16 14:42 ` [PATCH v2 04/11] drm/i915/vrr: Move CMRR hw registers to fix refresh rate path Mitul Golani
2026-06-16 14:42 ` [PATCH v2 05/11] drm/i915/vrr: Enable/Disable CMRR based on enable/disable preconditions Mitul Golani
2026-06-16 14:42 ` [PATCH v2 06/11] drm/i915/display: Move CMRR crtc_state members under VRR Mitul Golani
2026-06-17 12:02   ` Jani Nikula
2026-06-16 14:42 ` [PATCH v2 07/11] drm/i915/vrr: Fix the CMRR enabling/disabling sequence Mitul Golani
2026-06-16 14:42 ` [PATCH v2 08/11] drm/i915/vrr: Compare state and HW registers if platform supports CMRR Mitul Golani
2026-06-16 14:42 ` [PATCH v2 09/11] drm/i915/vrr: Remove TODO as CMRR is exclusive to Adaptive mode Mitul Golani
2026-06-16 14:42 ` [PATCH v2 10/11] drm/i915/vrr: Return from CMRR compute config in case of PSR2 enabled Mitul Golani
2026-06-16 14:42 ` [PATCH v2 11/11] drm/i915/vrr: Enable cmrr Mitul Golani
2026-06-16 14:59 ` ✗ CI.checkpatch: warning for Enable CMRR in fixed-RR VRR path Patchwork
2026-06-16 15:00 ` ✓ CI.KUnit: success " Patchwork
2026-06-16 15:39 ` ✓ Xe.CI.BAT: " Patchwork
2026-06-16 18:40 ` ✗ Xe.CI.FULL: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260616144233.832276-3-mitulkumar.ajitkumar.golani@intel.com \
    --to=mitulkumar.ajitkumar.golani@intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=chaitanya.kumar.borah@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox