From: Stuart Summers <stuart.summers@intel.com>
Cc: rodrigo.vivi@intel.com, riana.tauro@intel.com,
anoop.c.vijay@intel.com, matthew.d.roper@intel.com,
fei.yang@intel.com, intel-xe@lists.freedesktop.org,
Stuart Summers <stuart.summers@intel.com>
Subject: [PATCH 04/16] drm/xe: Add enable_media module parameter
Date: Fri, 20 Nov 2026 05:47:15 +0000 [thread overview]
Message-ID: <20261120054712.377573-22-stuart.summers@intel.com> (raw)
In-Reply-To: <20261120054712.377573-18-stuart.summers@intel.com>
The gt_types_allowed configfs attribute is intended for debug only,
so provide a supported way to disable the media GT in production.
The modparam takes precedence over configfs so a single knob is enough
to guarantee the media GT is left alone.
The parameter is tri-state so that -1 can leave the decision to the
driver, which currently enables media wherever it is present.
Both inputs are writable while the driver runs, so latch the result into
xe->info.media_allowed during early probe and read it back through
xe_device_media_allowed(). That keeps the decision fixed for the
lifetime of the device and makes it available outside xe_pci.c.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
---
drivers/gpu/drm/xe/xe_configfs.c | 3 +++
drivers/gpu/drm/xe/xe_defaults.h | 1 +
drivers/gpu/drm/xe/xe_device.c | 14 ++++++++++++++
drivers/gpu/drm/xe/xe_device.h | 1 +
drivers/gpu/drm/xe/xe_device_types.h | 2 ++
drivers/gpu/drm/xe/xe_module.c | 7 +++++++
drivers/gpu/drm/xe/xe_module.h | 1 +
drivers/gpu/drm/xe/xe_pci.c | 21 ++++++++++++++++++---
8 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/xe/xe_configfs.c b/drivers/gpu/drm/xe/xe_configfs.c
index 2ddd707a6dbd..43950f499a89 100644
--- a/drivers/gpu/drm/xe/xe_configfs.c
+++ b/drivers/gpu/drm/xe/xe_configfs.c
@@ -96,6 +96,9 @@
* will always return one GT type per line. "primary" and "media" are the
* GT type names supported by this interface.
*
+ * Note that the ``enable_media=0`` module parameter takes precedence over
+ * this attribute: it disables the media GT even if "media" is listed here.
+ *
* This attribute can only be set before binding to the device.
*
* Examples:
diff --git a/drivers/gpu/drm/xe/xe_defaults.h b/drivers/gpu/drm/xe/xe_defaults.h
index 0884224ef7c7..8d69df72fe4e 100644
--- a/drivers/gpu/drm/xe/xe_defaults.h
+++ b/drivers/gpu/drm/xe/xe_defaults.h
@@ -13,6 +13,7 @@
#define XE_DEFAULT_GUC_LOG_LEVEL 1
#endif
+#define XE_DEFAULT_ENABLE_MEDIA -1
#define XE_DEFAULT_PROBE_DISPLAY IS_ENABLED(CONFIG_DRM_XE_DISPLAY)
#define XE_DEFAULT_VRAM_BAR_SIZE 0
#define XE_DEFAULT_FORCE_PROBE CONFIG_DRM_XE_FORCE_PROBE
diff --git a/drivers/gpu/drm/xe/xe_device.c b/drivers/gpu/drm/xe/xe_device.c
index b053a788d59c..e179d298cbba 100644
--- a/drivers/gpu/drm/xe/xe_device.c
+++ b/drivers/gpu/drm/xe/xe_device.c
@@ -377,6 +377,20 @@ bool xe_device_is_admin_only(const struct xe_device *xe)
}
#endif
+/**
+ * xe_device_media_allowed() - Check whether the media IP may be used.
+ * @xe: the &xe_device to check
+ *
+ * Returns the decision latched during early probe, see
+ * @xe_device.info.media_allowed.
+ *
+ * Return: true if media may be used, false otherwise.
+ */
+bool xe_device_media_allowed(struct xe_device *xe)
+{
+ return xe->info.media_allowed;
+}
+
/* Number of allocated struct xe_device */
static atomic_t xe_device_count;
diff --git a/drivers/gpu/drm/xe/xe_device.h b/drivers/gpu/drm/xe/xe_device.h
index 7a7632e2d56b..b8b24216ee6a 100644
--- a/drivers/gpu/drm/xe/xe_device.h
+++ b/drivers/gpu/drm/xe/xe_device.h
@@ -279,6 +279,7 @@ static inline bool xe_device_is_admin_only(const struct xe_device *xe)
}
#endif
+bool xe_device_media_allowed(struct xe_device *xe);
void xe_device_exit(void);
/*
diff --git a/drivers/gpu/drm/xe/xe_device_types.h b/drivers/gpu/drm/xe/xe_device_types.h
index 8f2a31949073..cfb2639b014e 100644
--- a/drivers/gpu/drm/xe/xe_device_types.h
+++ b/drivers/gpu/drm/xe/xe_device_types.h
@@ -226,6 +226,8 @@ struct xe_device {
u8 has_pt_mirror:1;
/** @info.is_dgfx: is discrete device */
u8 is_dgfx:1;
+ /** @info.media_allowed: Media IP may be used */
+ u8 media_allowed:1;
/** @info.needs_scratch: needs scratch page for oob prefetch to work */
u8 needs_scratch:1;
/**
diff --git a/drivers/gpu/drm/xe/xe_module.c b/drivers/gpu/drm/xe/xe_module.c
index 897724cb5cfb..d6f3dd54613e 100644
--- a/drivers/gpu/drm/xe/xe_module.c
+++ b/drivers/gpu/drm/xe/xe_module.c
@@ -22,6 +22,7 @@
#include "xe_sched_job.h"
struct xe_modparam xe_modparam = {
+ .enable_media = XE_DEFAULT_ENABLE_MEDIA,
.probe_display = XE_DEFAULT_PROBE_DISPLAY,
.guc_log_level = XE_DEFAULT_GUC_LOG_LEVEL,
.force_probe = XE_DEFAULT_FORCE_PROBE,
@@ -38,6 +39,12 @@ module_param_named(svm_notifier_size, xe_modparam.svm_notifier_size, uint, 0600)
MODULE_PARM_DESC(svm_notifier_size, "Set the svm notifier size in MiB, must be power of 2 "
"[default=" __stringify(XE_DEFAULT_SVM_NOTIFIER_SIZE) "]");
+module_param_named(enable_media, xe_modparam.enable_media, int, 0444);
+MODULE_PARM_DESC(enable_media, "Enable the media GT, when present (-1=auto, 0=disable, 1=enable). "
+ "Disabling overrides any media GT selected via the gt_types_allowed "
+ "configfs attribute "
+ "[default=" __stringify(XE_DEFAULT_ENABLE_MEDIA) "])");
+
#if IS_ENABLED(CONFIG_DRM_XE_DISPLAY)
module_param_named(probe_display, xe_modparam.probe_display, bool, 0444);
MODULE_PARM_DESC(probe_display, "Probe display HW, otherwise it's left untouched "
diff --git a/drivers/gpu/drm/xe/xe_module.h b/drivers/gpu/drm/xe/xe_module.h
index 6272d9e41207..ffa5ca462207 100644
--- a/drivers/gpu/drm/xe/xe_module.h
+++ b/drivers/gpu/drm/xe/xe_module.h
@@ -12,6 +12,7 @@ struct work_struct;
/* Module modprobe variables */
struct xe_modparam {
+ int enable_media;
bool probe_display;
int force_vram_bar_size;
int guc_log_level;
diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c
index fb2a5f3311c8..7a5c4939a0ac 100644
--- a/drivers/gpu/drm/xe/xe_pci.c
+++ b/drivers/gpu/drm/xe/xe_pci.c
@@ -641,7 +641,7 @@ static int read_gmdid(struct xe_device *xe, enum xe_gmdid_type type, u32 *ver, u
int err;
/* Don't try to read media ver if media GT is not allowed */
- if (type == GMDID_MEDIA && !xe_configfs_media_gt_allowed(to_pci_dev(xe->drm.dev))) {
+ if (type == GMDID_MEDIA && !xe_device_media_allowed(xe)) {
*ver = *revid = 0;
return 0;
}
@@ -778,6 +778,18 @@ static int xe_probe_info_early(struct xe_device *xe,
return 0;
}
+/*
+ * Whether the user wants media at all. The default (-1) leaves the decision
+ * to the driver.
+ */
+static bool media_wanted(struct xe_device *xe)
+{
+ if (xe_modparam.enable_media < 0)
+ return true;
+
+ return xe_modparam.enable_media;
+}
+
/*
* Initialize device info content that only depends on static driver_data
* passed to the driver at probe time from PCI ID table.
@@ -809,6 +821,9 @@ static int xe_info_init_early(struct xe_device *xe,
xe_wa_process_device_oob(xe);
+ xe->info.media_allowed = media_wanted(xe) &&
+ xe_configfs_media_gt_allowed(to_pci_dev(xe->drm.dev));
+
xe->info.dma_mask_size = desc->dma_mask_size;
xe->info.va_bits = desc->va_bits;
xe->info.vm_max_level = desc->vm_max_level;
@@ -952,8 +967,8 @@ static struct xe_gt *alloc_media_gt(struct xe_tile *tile,
struct xe_device *xe = tile_to_xe(tile);
struct xe_gt *gt;
- if (!xe_configfs_media_gt_allowed(to_pci_dev(xe->drm.dev))) {
- xe_tile_info(tile, "Media GT disabled via configfs\n");
+ if (!xe_device_media_allowed(xe)) {
+ xe_tile_info(tile, "Media GT disabled\n");
return NULL;
}
--
2.43.0
next prev parent reply other threads:[~2026-11-20 5:47 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 5:47 [PATCH 00/16] Work around media 52-bit limitation on CRI Stuart Summers
2026-11-20 5:47 ` [PATCH 01/16] drm/xe/sysctrl: Use preallocated mailbox staging buffers Stuart Summers
2026-11-20 5:52 ` sashiko-bot
2026-11-20 5:47 ` [PATCH 02/16] drm/xe: Process device OOB workarounds during early info init Stuart Summers
2026-11-20 5:47 ` [PATCH 03/16] drm/xe/sysctrl: Restore the SoC remapper on every runtime resume Stuart Summers
2026-11-20 5:47 ` Stuart Summers [this message]
2026-11-20 5:47 ` [PATCH 05/16] drm/xe: Detect each GMD_ID IP in a loop Stuart Summers
2026-11-20 5:47 ` [PATCH 06/16] drm/xe: Tolerate a missing graphics IP in xe_info_init() Stuart Summers
2026-11-20 5:47 ` [PATCH 07/16] drm/xe: Verify IP presence against GU_CNTL Stuart Summers
2026-11-20 5:47 ` [PATCH 08/16] drm/xe: Guard per-tile primary GT accesses Stuart Summers
2026-11-20 5:47 ` [PATCH 09/16] drm/xe: Stop assuming the root tile has a primary GT Stuart Summers
2026-11-20 5:47 ` [PATCH 10/16] drm/xe: Do not claim flat CCS without a graphics IP Stuart Summers
2026-11-20 5:47 ` [PATCH 11/16] drm/xe: Run page table updates on the media GT when there is no primary Stuart Summers
2026-11-20 6:10 ` sashiko-bot
2026-11-20 5:47 ` [PATCH 12/16] drm/xe: Document that gt_types_allowed=media now probes Stuart Summers
2026-11-20 5:47 ` [PATCH 13/16] drm/xe: Fall back to CPU copies when the tile cannot blit Stuart Summers
2026-11-20 6:09 ` sashiko-bot
2026-11-20 5:47 ` [PATCH 14/16] drm/xe: Require a fully visible VRAM BAR without a primary GT Stuart Summers
2026-11-20 5:47 ` [PATCH 15/16] drm/xe: Allow probe " Stuart Summers
2026-11-20 6:13 ` sashiko-bot
2026-11-20 5:47 ` [PATCH 16/16] drm/xe: Work around media 52-bit limitation on CRI Stuart Summers
2026-11-20 6:11 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120054712.377573-22-stuart.summers@intel.com \
--to=stuart.summers@intel.com \
--cc=anoop.c.vijay@intel.com \
--cc=fei.yang@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=matthew.d.roper@intel.com \
--cc=riana.tauro@intel.com \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox