public inbox for intel-xe@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Purkait, Soham" <soham.purkait@intel.com>
To: Riana Tauro <riana.tauro@intel.com>, <intel-xe@lists.freedesktop.org>
Cc: <anshuman.gupta@intel.com>, <rodrigo.vivi@intel.com>,
	<aravind.iddamsetty@linux.intel.com>, <badal.nilawar@intel.com>,
	<raag.jadav@intel.com>, <ravi.kishore.koppuravuri@intel.com>,
	<mallesh.koujalagi@intel.com>
Subject: Re: [v2,08/11] drm/xe/xe_ras: Add support for Uncorrectable Core-Compute errors
Date: Fri, 6 Mar 2026 09:20:16 +0530	[thread overview]
Message-ID: <6392e82e-371a-4474-b456-0a0affa29db5@intel.com> (raw)
In-Reply-To: <20260302102155.4074630-21-riana.tauro@intel.com>

Hi Riana,

On 02-03-2026 15:52, Riana Tauro wrote:
> Uncorrectable Core-Compute errors are classified into Global and Local
> errors.
>
> Global error is an error that affects the entire device requiring a
> reset. This type of error is not isolated. When an AER is reported and
> error_detected is invoked return PCI_ERS_RESULT_NEED_RESET.
>
> A Local error is confined to a specific component or context like a
> engine. These errors can be contained and recovered by resetting
> only the affected part without distrupting the rest of the device.
>
> Upon detection of an Uncorrectable Local Core-Compute error, an AER is
> generated and GuC is notified of the error. The KMD then sets
> the context as non-runnable and initiates an engine reset.
> (TODO: GuC <->KMD communication for the error).
> Since the error is contained and recovered, PCI error handling
> callback returns PCI_ERS_RESULT_RECOVERED.
>
> Signed-off-by: Riana Tauro <riana.tauro@intel.com>
> ---
> v2: add newline and fix log
>      add bounds check (Mallesh)
>      add ras specific enum (Raag)
>      helper for sysctrl prepare command
>      process all errors before deciding recovery action
> ---
>   drivers/gpu/drm/xe/xe_ras.c       | 139 ++++++++++++++++++++++++++++++
>   drivers/gpu/drm/xe/xe_ras.h       |   3 +
>   drivers/gpu/drm/xe/xe_ras_types.h |  16 ++++
>   3 files changed, 158 insertions(+)
>
> diff --git a/drivers/gpu/drm/xe/xe_ras.c b/drivers/gpu/drm/xe/xe_ras.c
> index 3bef589082d7..61c01a4bfadb 100644
> --- a/drivers/gpu/drm/xe/xe_ras.c
> +++ b/drivers/gpu/drm/xe/xe_ras.c
> @@ -4,7 +4,14 @@
>    */
>   
>   #include "xe_device_types.h"
> +#include "xe_printk.h"
>   #include "xe_ras.h"
> +#include "xe_ras_types.h"
> +#include "xe_sysctrl_mailbox.h"
> +#include "xe_sysctrl_mailbox_types.h"
> +
> +#define COMPUTE_ERROR_SEVERITY_MASK		GENMASK(26, 25)
> +#define GLOBAL_UNCORR_ERROR			2
>   
>   /* Severity classification of detected errors */
>   enum xe_ras_severity {
> @@ -62,6 +69,138 @@ static inline const char *comp_to_str(struct xe_device *xe, u32 comp)
>   	return xe_ras_components[comp];
>   }
>   
> +static void log_ras_error(struct xe_device *xe, struct xe_ras_error_class *error_class)
> +{
> +	struct xe_ras_error_common common_info = error_class->common;
> +	struct xe_ras_error_product product_info = error_class->product;
> +	u8 tile = product_info.unit.tile;
> +	u32 instance = product_info.unit.instance;
> +	u32 cause = product_info.error_cause.cause;
> +
> +	xe_err(xe, "[RAS]: Tile%u, Instance %u, %s %s Error detected Cause: 0x%x\n",
> +	       tile, instance, severity_to_str(xe, common_info.severity),
> +	       comp_to_str(xe, common_info.component), cause);
> +}
> +
> +static enum xe_ras_recovery_action handle_compute_errors(struct xe_device *xe,
> +							 struct xe_ras_error_array *arr)
> +{
> +	struct xe_ras_compute_error *error_info = (struct xe_ras_compute_error *)arr->error_details;
> +	u8 uncorr_type;
> +
> +	uncorr_type = FIELD_GET(COMPUTE_ERROR_SEVERITY_MASK, error_info->error_log_header);
> +	log_ras_error(xe, &arr->error_class);
> +
> +	xe_err(xe, "[RAS]: Core Compute Error: timestamp %llu Uncorrected error type %u\n",
> +	       arr->timestamp, uncorr_type);
> +
> +	/* Request a RESET if error is global */
> +	if (uncorr_type == GLOBAL_UNCORR_ERROR)
> +		return XE_RAS_RECOVERY_ACTION_RESET;
> +
> +	/* Local errors are recovered using a engine reset */
> +	return XE_RAS_RECOVERY_ACTION_RECOVERED;
> +}
> +
> +static void xe_ras_prepare_sysctrl_command(struct xe_sysctrl_mailbox_command *command,

You can drop prefix for static functions.

Thanks,
Soham

> +					   u32 cmd_mask, void *request, size_t request_len,
> +					   void *response, size_t response_len)
> +{
> +	struct xe_sysctrl_mailbox_app_msg_hdr hdr = {0};
> +	u32 req_hdr;
> +
> +	req_hdr = FIELD_PREP(APP_HDR_GROUP_ID_MASK, XE_SYSCTRL_GROUP_GFSP) |
> +		  FIELD_PREP(APP_HDR_COMMAND_MASK, cmd_mask);
> +
> +	hdr.data = req_hdr;
> +	command->header = hdr;
> +	command->data_in = request;
> +	command->data_in_len = request_len;
> +	command->data_out = response;
> +	command->data_out_len = response_len;
> +}
> +
> +/**
> + * xe_ras_process_errors - Process and contain hardware errors
> + * @xe: xe device instance
> + *
> + * Get error details from system controller and return recovery
> + * method. Called only from PCI error handling.
> + *
> + * Returns: recovery action to be taken
> + */
> +enum xe_ras_recovery_action xe_ras_process_errors(struct xe_device *xe)
> +{
> +	struct xe_sysctrl_mailbox_command command = {0};
> +	struct xe_ras_get_error_response response;
> +	enum xe_ras_recovery_action final_action;
> +	size_t rlen;
> +	int ret;
> +
> +	/* Default action */
> +	final_action = XE_RAS_RECOVERY_ACTION_RECOVERED;
> +
> +	if (!xe->info.has_sysctrl)
> +		return XE_RAS_RECOVERY_ACTION_RESET;
> +
> +	xe_ras_prepare_sysctrl_command(&command, XE_SYSCTRL_CMD_GET_SOC_ERROR, NULL, 0,
> +				       &response, sizeof(response));
> +
> +	do {
> +		memset(&response, 0, sizeof(response));
> +		rlen = 0;
> +
> +		ret = xe_sysctrl_send_command(xe, &command, &rlen);
> +		if (ret || !rlen) {
> +			xe_err(xe, "[RAS]: Sysctrl error ret %d\n", ret);
> +			goto err;
> +		}
> +
> +		if (rlen != sizeof(response)) {
> +			xe_err(xe, "[RAS]: Sysctrl response does not match len!!\n");
> +			goto err;
> +		}
> +
> +		if (response.num_errors > XE_RAS_NUM_ERROR_ARR) {
> +			xe_err(xe, "[RAS]: Number of errors out of bound (%d)\n",
> +			       XE_RAS_NUM_ERROR_ARR);
> +			goto err;
> +		}
> +
> +		for (int i = 0; i < response.num_errors; i++) {
> +			struct xe_ras_error_array arr = response.error_arr[i];
> +			enum xe_ras_recovery_action action;
> +			struct xe_ras_error_class error_class;
> +			u8 component;
> +
> +			error_class = arr.error_class;
> +			component = error_class.common.component;
> +
> +			switch (component) {
> +			case XE_RAS_COMPONENT_CORE_COMPUTE:
> +				action = handle_compute_errors(xe, &arr);
> +				break;
> +			default:
> +				xe_err(xe, "[RAS]: Unknown error component %u\n", component);
> +				break;
> +			}
> +
> +			/*
> +			 * Retain the highest severity action. Process and log all errors
> +			 * and then take appropriate recovery action
> +			 */
> +			if (action > final_action)
> +				final_action = action;
> +		}
> +
> +	} while (response.additional_errors);
> +
> +	return final_action;
> +
> +err:
> +	return XE_RAS_RECOVERY_ACTION_RESET;
> +}
> +
>   #ifdef CONFIG_PCIEAER
>   static void aer_unmask_and_downgrade_internal_error(struct xe_device *xe)
>   {
> diff --git a/drivers/gpu/drm/xe/xe_ras.h b/drivers/gpu/drm/xe/xe_ras.h
> index 14cb973603e7..e191ab80080c 100644
> --- a/drivers/gpu/drm/xe/xe_ras.h
> +++ b/drivers/gpu/drm/xe/xe_ras.h
> @@ -6,8 +6,11 @@
>   #ifndef _XE_RAS_H_
>   #define _XE_RAS_H_
>   
> +#include "xe_ras_types.h"
> +
>   struct xe_device;
>   
>   void xe_ras_init(struct xe_device *xe);
> +enum xe_ras_recovery_action  xe_ras_process_errors(struct xe_device *xe);
>   
>   #endif
> diff --git a/drivers/gpu/drm/xe/xe_ras_types.h b/drivers/gpu/drm/xe/xe_ras_types.h
> index 676755732ef6..221d07efd84c 100644
> --- a/drivers/gpu/drm/xe/xe_ras_types.h
> +++ b/drivers/gpu/drm/xe/xe_ras_types.h
> @@ -11,6 +11,22 @@
>   #define XE_RAS_NUM_ERROR_ARR		3
>   #define XE_RAS_MAX_ERROR_DETAILS	16
>   
> +/**
> + * enum xe_ras_recovery_action - RAS recovery actions
> + *
> + * @XE_RAS_RECOVERY_ACTION_RECOVERED: Error recovered
> + * @XE_RAS_RECOVERY_ACTION_RESET: Requires reset
> + * @XE_RAS_RECOVERY_ACTION_DISCONNECT: Requires disconnect
> + *
> + * This enum defines the possible recovery actions that can be taken in response
> + * to RAS errors.
> + */
> +enum xe_ras_recovery_action {
> +	XE_RAS_RECOVERY_ACTION_RECOVERED = 0,
> +	XE_RAS_RECOVERY_ACTION_RESET,
> +	XE_RAS_RECOVERY_ACTION_DISCONNECT
> +};
> +
>   /**
>    * struct xe_ras_error_common - Common RAS error class
>    *

  parent reply	other threads:[~2026-03-06  3:50 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-02 10:21 [PATCH v2 00/11] Introduce Xe Uncorrectable Error Handling Riana Tauro
2026-03-02 10:21 ` [PATCH v2 01/11] drm/xe/xe_sysctrl: Add System controller patch Riana Tauro
2026-03-02 10:21 ` [PATCH v2 02/11] drm/xe/xe_survivability: Decouple survivability info from boot survivability Riana Tauro
2026-03-02 17:00   ` Raag Jadav
2026-03-03  8:18     ` Mallesh, Koujalagi
2026-03-30 12:56       ` Tauro, Riana
2026-03-30 13:00     ` Tauro, Riana
2026-03-02 10:21 ` [PATCH v2 03/11] drm/xe/xe_pci_error: Implement PCI error recovery callbacks Riana Tauro
2026-03-02 17:37   ` Raag Jadav
2026-03-03  5:09     ` Riana Tauro
2026-03-04 10:38   ` Mallesh, Koujalagi
2026-03-31  5:18     ` Tauro, Riana
2026-03-02 10:21 ` [PATCH v2 04/11] drm/xe/xe_pci_error: Group all devres to release them on PCIe slot reset Riana Tauro
2026-03-02 10:22 ` [PATCH v2 05/11] drm/xe: Skip device access during PCI error recovery Riana Tauro
2026-03-04 10:59   ` Mallesh, Koujalagi
2026-03-02 10:22 ` [PATCH v2 06/11] drm/xe/xe_ras: Initialize Uncorrectable AER Registers Riana Tauro
2026-03-02 10:22 ` [PATCH v2 07/11] drm/xe/xe_ras: Add structures and commands for Uncorrectable Core Compute Errors Riana Tauro
2026-03-04 16:32   ` Raag Jadav
2026-03-31 16:14     ` Tauro, Riana
2026-04-01  6:25       ` Raag Jadav
2026-04-01  6:39         ` Tauro, Riana
2026-03-02 10:22 ` [PATCH v2 08/11] drm/xe/xe_ras: Add support for Uncorrectable Core-Compute errors Riana Tauro
2026-03-04 16:52   ` Raag Jadav
2026-03-06 18:37     ` Raag Jadav
2026-03-31 16:24     ` Tauro, Riana
2026-04-01  6:34       ` Raag Jadav
2026-04-01  6:47         ` Tauro, Riana
2026-03-06  3:50   ` Purkait, Soham [this message]
2026-03-31 16:16     ` [v2,08/11] " Tauro, Riana
2026-03-02 10:22 ` [PATCH v2 09/11] drm/xe/xe_ras: Add structures for SoC Internal errors Riana Tauro
2026-03-10 13:02   ` Mallesh, Koujalagi
2026-03-11 14:51     ` Riana Tauro
2026-03-02 10:22 ` [PATCH v2 10/11] drm/xe/xe_ras: Handle Uncorrectable " Riana Tauro
2026-03-10 13:29   ` Mallesh, Koujalagi
2026-03-11 14:55     ` Riana Tauro
2026-03-02 10:22 ` [PATCH v2 11/11] drm/xe/xe_pci_error: Process errors in mmio_enabled Riana Tauro
2026-03-11  7:10   ` Mallesh, Koujalagi
2026-03-11 14:39     ` Riana Tauro
2026-03-12  8:08       ` Mallesh, Koujalagi
2026-03-02 16:10 ` ✗ CI.checkpatch: warning for Introduce Xe Uncorrectable Error Handling (rev2) Patchwork
2026-03-02 16:11 ` ✓ CI.KUnit: success " Patchwork
2026-03-02 16:48 ` ✓ Xe.CI.BAT: " Patchwork
2026-03-02 18:29 ` ✗ Xe.CI.FULL: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6392e82e-371a-4474-b456-0a0affa29db5@intel.com \
    --to=soham.purkait@intel.com \
    --cc=anshuman.gupta@intel.com \
    --cc=aravind.iddamsetty@linux.intel.com \
    --cc=badal.nilawar@intel.com \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=mallesh.koujalagi@intel.com \
    --cc=raag.jadav@intel.com \
    --cc=ravi.kishore.koppuravuri@intel.com \
    --cc=riana.tauro@intel.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox