From: Jani Nikula <jani.nikula@intel.com>
To: "Michał Grzelak" <michal.grzelak@intel.com>,
intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: "Suraj Kandpal" <suraj.kandpal@intel.com>,
"Michał Grzelak" <michal.grzelak@intel.com>
Subject: Re: [PATCH v10 7/8] drm/i915: override Combo's VS/PE when requested
Date: Tue, 11 Aug 2026 18:51:22 +0300 [thread overview]
Message-ID: <7fa2b7fd70bdc17eba3f6a9dcac6be42cb692f8c@intel.com> (raw)
In-Reply-To: <20260702185839.4042397-8-michal.grzelak@intel.com>
On Thu, 02 Jul 2026, Michał Grzelak <michal.grzelak@intel.com> wrote:
> Add accessor function for Combo to read requested table from VBT #57.
> Parse the requested table and transform data into port's buffer.
>
> For EHL, in cases when eDP encoder uses low vswing, choose 3rd table if
> encoder supports HBR3. Otherwise use 2nd table for eDP using low vswing.
>
> In cases when eDP encoder does not use low vswing, choose 2nd table if
> encoder supports mode higher or including HBR2. Otherwise use 3rd table
> for eDP not using low vswing.
>
> For external DP use 2nd table if encoder supports modes higher than or
> including HBR2. Use 1st table if external DP encoder supports modes
> lower than HBR2.
>
> For JSL, always use 1st table for external DP. For eDPs not using low
> vswing use 1st table as well.
>
> In cases when eDP encoder uses low vswing, choose 1st table if encoder
> supports HBR3. When encoder supports HBR2 choose 3rd table. When
> encoder supports modes lower than HBR2 choose 2nd table.
>
> There are no changes to intel_ddi_dp_level() since selection of correct
> row of intel_ddi_buf_trans_entry is same as when no override request has
> been done.
>
> Looking from other OSes, in case when encoder does not support DP we
> could theoretically use 1st table. However, as of now, use default
> tables.
>
> v9->v10
> - call dedicated VS/PE-O vfunc
> - drop deconstifying default tables (Suraj, Jani)
> - cache `entries` into const field after data is overwritten (Jani)
>
> v8->v9
> - deconstify intel_ddi_buf_trans_entry
>
> v6->v7
> - handle VS/PE-O's VBT details in intel_bios_* functions (Jani)
> - remove vspeo's cast to (void *) (Jani)
> - call encoder->get_buf_trans() once (Jani)
> - return NULL from intel_bios_get_* when using default (Jani)
> - validate VS/PE-O in intel_bios.c (Jani)
> - check devdata->vspeo if VS/PE-O was requested
> - inline {jsl,ehl}_combo_get_vspeo_buf_trans()
> - remove temporarily LT
>
> v4->v5
> - blend index computation with table parsing
> - remove enums entirely
> - add spaces around operators (Suraj)
> - remove spaces after type casting (Suraj)
> - remove INTEL_DISPLAY_STATE_WARN (Suraj)
>
> Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_bios.c | 104 ++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_bios.h | 6 +
> .../drm/i915/display/intel_ddi_buf_trans.c | 41 ++++++-
> 3 files changed, 148 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
> index f897ac067585..b84552527050 100644
> --- a/drivers/gpu/drm/i915/display/intel_bios.c
> +++ b/drivers/gpu/drm/i915/display/intel_bios.c
> @@ -3985,6 +3985,110 @@ intel_bios_get_c10_vspeo(const struct intel_bios_encoder_data *devdata,
> return vspeo;
> }
>
> +const struct intel_ddi_buf_trans *
> +intel_bios_get_ehl_combo_vspeo(const struct intel_bios_encoder_data *devdata,
> + bool has_dp, int port_clock, bool has_edp)
> +{
> + struct intel_display *display;
> + union intel_ddi_buf_trans_entry *entries;
> + int num_columns, num_rows, level, idx;
> + struct intel_ddi_buf_trans *vspeo;
> + const u32 *tables;
> + size_t offset = 0;
> +
> + if (!validate_vspeo(devdata, has_dp))
> + return NULL;
> +
> + display = devdata->display;
> + vspeo = devdata->vspeo;
> + entries = devdata->entries;
> + tables = display->vbt.vspeo.tables;
> + num_columns = display->vbt.vspeo.num_columns;
> + num_rows = display->vbt.vspeo.num_rows;
Same thing about initialization as in the preceding patch.
> +
> + idx = port_clock > 270000 ? 1 : 0;
> + if (has_edp)
> + idx = port_clock > 540000 ? 2 : 1;
Init once, not twice for has_edp.
> +
> + offset += idx * num_rows * num_columns;
> +
> + for (level = 0; level < num_rows; level++) {
> + u32 dw2_swing_sel = tables[offset];
> + u32 dw7_n_scalar = tables[offset + 1];
> + u32 dw4_cursor_coeff = tables[offset + 2];
> + u32 dw4_post_cursor_2 = tables[offset + 3];
> + u32 dw4_post_cursor_1 = tables[offset + 4];
> +
> + entries[level].icl.dw2_swing_sel = dw2_swing_sel;
> + entries[level].icl.dw7_n_scalar = dw7_n_scalar;
> + entries[level].icl.dw4_cursor_coeff = dw4_cursor_coeff;
> + entries[level].icl.dw4_post_cursor_2 = dw4_post_cursor_2;
> + entries[level].icl.dw4_post_cursor_1 = dw4_post_cursor_1;
Again, u8 vs. u32.
> +
> + offset += num_columns;
> + }
> +
> + vspeo->entries = entries;
> + vspeo->num_entries = num_rows;
> +
> + return vspeo;
> +}
> +
> +const struct intel_ddi_buf_trans *
> +intel_bios_get_jsl_combo_vspeo(const struct intel_bios_encoder_data *devdata,
> + bool has_dp, int port_clock, bool low_vswing_edp)
> +{
> + struct intel_display *display;
> + union intel_ddi_buf_trans_entry *entries;
> + int num_columns, num_rows, level, idx;
> + struct intel_ddi_buf_trans *vspeo;
> + const u32 *tables;
> + size_t offset = 0;
> +
> + if (!validate_vspeo(devdata, has_dp))
> + return NULL;
> +
> + display = devdata->display;
> + vspeo = devdata->vspeo;
> + entries = devdata->entries;
> + tables = display->vbt.vspeo.tables;
> + num_columns = display->vbt.vspeo.num_columns;
> + num_rows = display->vbt.vspeo.num_rows;
Same.
> +
> + idx = 0;
Again, IMO bad form to do something once, and then override in some
other cases, *unless* you do this kind of "default" init at declaration.
> + if (low_vswing_edp) {
> + if (port_clock > 540000)
> + idx = 0;
> + else if (port_clock > 270000)
> + idx = 1;
> + else
> + idx = 2;
> + }
> +
> + offset += idx * num_rows * num_columns;
> +
> + for (level = 0; level < num_rows; level++) {
> + u32 dw2_swing_sel = tables[offset];
> + u32 dw7_n_scalar = tables[offset + 1];
> + u32 dw4_cursor_coeff = tables[offset + 2];
> + u32 dw4_post_cursor_2 = tables[offset + 3];
> + u32 dw4_post_cursor_1 = tables[offset + 4];
> +
> + entries[level].icl.dw2_swing_sel = dw2_swing_sel;
> + entries[level].icl.dw7_n_scalar = dw7_n_scalar;
> + entries[level].icl.dw4_cursor_coeff = dw4_cursor_coeff;
> + entries[level].icl.dw4_post_cursor_2 = dw4_post_cursor_2;
> + entries[level].icl.dw4_post_cursor_1 = dw4_post_cursor_1;
u32 vs. u8
> +
> + offset += num_columns;
> + }
> +
> + vspeo->entries = entries;
> + vspeo->num_entries = num_rows;
> +
> + return vspeo;
> +}
> +
> bool intel_bios_encoder_is_dedicated_external(const struct intel_bios_encoder_data *devdata)
> {
> return devdata->display->vbt.version >= 264 &&
> diff --git a/drivers/gpu/drm/i915/display/intel_bios.h b/drivers/gpu/drm/i915/display/intel_bios.h
> index 49acf8c405e2..c55765a94594 100644
> --- a/drivers/gpu/drm/i915/display/intel_bios.h
> +++ b/drivers/gpu/drm/i915/display/intel_bios.h
> @@ -79,6 +79,12 @@ intel_bios_get_c20_vspeo(const struct intel_bios_encoder_data *devdata,
> const struct intel_ddi_buf_trans *
> intel_bios_get_c10_vspeo(const struct intel_bios_encoder_data *devdata,
> bool has_dp, int port_clock, bool has_edp);
> +const struct intel_ddi_buf_trans *
> +intel_bios_get_ehl_combo_vspeo(const struct intel_bios_encoder_data *devdata,
> + bool has_dp, int port_clock, bool has_edp);
> +const struct intel_ddi_buf_trans *
> +intel_bios_get_jsl_combo_vspeo(const struct intel_bios_encoder_data *devdata,
> + bool has_dp, int port_clock, bool low_vswing_edp);
>
> bool intel_bios_encoder_requests_vspeo(const struct intel_bios_encoder_data *devdata);
> bool intel_bios_encoder_supports_dvi(const struct intel_bios_encoder_data *devdata);
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> index 92c0d0f933ab..0843b3e2bfa6 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
> @@ -1784,6 +1784,39 @@ xe3plpd_get_lt_buf_trans(struct intel_encoder *encoder,
> return intel_get_buf_trans(&xe3plpd_lt_trans_dp14, n_entries);
> }
>
> +static const struct intel_ddi_buf_trans *
> +jsl_get_combo_buf_trans_override(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state,
> + int *n_entries)
> +{
> + const struct intel_bios_encoder_data *devdata = encoder->devdata;
> + bool has_edp, has_dp;
> + int port_clock;
> +
> + has_edp = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP);
> + has_dp = intel_crtc_has_dp_encoder(crtc_state);
> + port_clock = crtc_state->port_clock;
> +
> + return intel_bios_get_jsl_combo_vspeo(devdata, has_dp, port_clock,
> + has_edp && use_edp_low_vswing(encoder));
> +}
> +
> +static const struct intel_ddi_buf_trans *
> +ehl_get_combo_buf_trans_override(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state,
> + int *n_entries)
> +{
> + const struct intel_bios_encoder_data *devdata = encoder->devdata;
> + bool has_edp, has_dp;
> + int port_clock;
> +
> + has_edp = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP);
> + has_dp = intel_crtc_has_dp_encoder(crtc_state);
> + port_clock = crtc_state->port_clock;
> +
> + return intel_bios_get_ehl_combo_vspeo(devdata, has_dp, port_clock, has_edp);
> +}
> +
> static const struct intel_ddi_buf_trans *
> mtl_get_c10_buf_trans_override(struct intel_encoder *encoder,
> const struct intel_crtc_state *crtc_state,
> @@ -1847,11 +1880,13 @@ void intel_ddi_buf_trans_init(struct intel_encoder *encoder)
> else
> encoder->get_buf_trans = tgl_get_dkl_buf_trans;
> } else if (DISPLAY_VER(display) == 11) {
> - if (display->platform.jasperlake)
> + if (display->platform.jasperlake) {
> encoder->get_buf_trans = jsl_get_combo_buf_trans;
> - else if (display->platform.elkhartlake)
> + encoder->get_buf_trans_override = jsl_get_combo_buf_trans_override;
> + } else if (display->platform.elkhartlake) {
> encoder->get_buf_trans = ehl_get_combo_buf_trans;
> - else if (intel_encoder_is_combo(encoder))
> + encoder->get_buf_trans_override = ehl_get_combo_buf_trans_override;
> + } else if (intel_encoder_is_combo(encoder))
> encoder->get_buf_trans = icl_get_combo_buf_trans;
> else
> encoder->get_buf_trans = icl_get_mg_buf_trans;
--
Jani Nikula, Intel
next prev parent reply other threads:[~2026-08-11 15:51 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-02 18:58 [PATCH v10 0/8] Vswing / Pre-emphasis Override Michał Grzelak
2026-07-02 18:58 ` [PATCH v10 1/8] drm/i915/bios: search for VBT #57 by default Michał Grzelak
2026-07-02 18:58 ` [PATCH v10 2/8] drm/i915/bios: store VBT #57's metadata in intel_vbt_data Michał Grzelak
2026-07-02 18:58 ` [PATCH v10 3/8] drm/i915/bios: print VS/PE-O port info Michał Grzelak
2026-07-02 18:58 ` [PATCH v10 4/8] drm/i915/bios: de/allocate VS/PE-O buffers for each port Michał Grzelak
2026-07-02 18:58 ` [PATCH v10 5/8] drm/i915/buf_trans: add vfunc for VS/PE-O Michał Grzelak
2026-07-06 6:12 ` Kandpal, Suraj
2026-07-02 18:58 ` [PATCH v10 6/8] drm/i915: override Snps's VS/PE when requested Michał Grzelak
2026-08-11 15:48 ` Jani Nikula
2026-08-13 15:52 ` Michał Grzelak
2026-07-02 18:58 ` [PATCH v10 7/8] drm/i915: override Combo's " Michał Grzelak
2026-08-11 15:51 ` Jani Nikula [this message]
2026-07-02 18:58 ` [PATCH v10 8/8] drm/i915/bios: remove VS/PE-O warning Michał Grzelak
2026-07-02 19:06 ` ✗ CI.checkpatch: warning for Vswing / Pre-emphasis Override (rev5) Patchwork
2026-07-02 19:07 ` ✓ CI.KUnit: success " Patchwork
2026-07-02 20:07 ` ✓ Xe.CI.BAT: " Patchwork
2026-07-03 13:55 ` ✓ Xe.CI.FULL: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7fa2b7fd70bdc17eba3f6a9dcac6be42cb692f8c@intel.com \
--to=jani.nikula@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=michal.grzelak@intel.com \
--cc=suraj.kandpal@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox