From: "Dixit, Ashutosh" <ashutosh.dixit@intel.com>
To: "Cavitt, Jonathan" <jonathan.cavitt@intel.com>
Cc: "intel-xe@lists.freedesktop.org" <intel-xe@lists.freedesktop.org>,
"Brost, Matthew" <matthew.brost@intel.com>,
"Souza, Jose" <jose.souza@intel.com>,
"Landwerlin, Lionel G" <lionel.g.landwerlin@intel.com>,
"Nerlige Ramappa, Umesh" <umesh.nerlige.ramappa@intel.com>
Subject: Re: [PATCH 7/7] drm/xe/oa: Allow only certain property changes from config
Date: Wed, 21 Aug 2024 08:19:56 -0700 [thread overview]
Message-ID: <877cc99a3n.wl-ashutosh.dixit@intel.com> (raw)
In-Reply-To: <CH0PR11MB5444B6260D259FEB4A06E24CE58D2@CH0PR11MB5444.namprd11.prod.outlook.com>
On Tue, 20 Aug 2024 07:15:51 -0700, Cavitt, Jonathan wrote:
>
Hi Jonathan,
> -----Original Message-----
> From: Dixit, Ashutosh <ashutosh.dixit@intel.com>
> Sent: Monday, August 19, 2024 5:58 PM
> To: intel-xe@lists.freedesktop.org
> Cc: Brost, Matthew <matthew.brost@intel.com>; Souza, Jose <jose.souza@intel.com>; Landwerlin, Lionel G <lionel.g.landwerlin@intel.com>; Nerlige Ramappa, Umesh <umesh.nerlige.ramappa@intel.com>; Cavitt, Jonathan <jonathan.cavitt@intel.com>
> Subject: [PATCH 7/7] drm/xe/oa: Allow only certain property changes from config
> >
> > Whereas all properties can be specified during OA stream open, when the OA
> > stream is reconfigured only the config_id and syncs can be specified.
> >
> > v2: Use separate function table for reconfig case (Jonathan)
> > Change bool function args to enum (Matt B)
> >
> > Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
>
>
> Minor nits below, but otherwise LGTM.
> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Thanks!
>
> > ---
> > drivers/gpu/drm/xe/xe_oa.c | 51 ++++++++++++++++++++++++++++++--------
> > 1 file changed, 40 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/xe/xe_oa.c b/drivers/gpu/drm/xe/xe_oa.c
> > index f43767e0a75ec..96420c3ea10fd 100644
> > --- a/drivers/gpu/drm/xe/xe_oa.c
> > +++ b/drivers/gpu/drm/xe/xe_oa.c
> > @@ -47,6 +47,11 @@ enum xe_oa_submit_deps {
> > XE_OA_SUBMIT_ADD_DEPS,
> > };
> >
> > +enum xe_oa_user_extn_from {
> > + XE_OA_USER_EXTN_FROM_OPEN,
> > + XE_OA_USER_EXTN_FROM_CONFIG,
> > +};
> > +
> > struct xe_oa_reg {
> > struct xe_reg addr;
> > u32 value;
> > @@ -1246,6 +1251,12 @@ static int xe_oa_set_prop_syncs_user(struct xe_oa *oa, u64 value,
> > return 0;
> > }
> >
> > +static int xe_oa_set_prop_ret_inval(struct xe_oa *oa, u64 value,
> > + struct xe_oa_open_param *param)
> > +{
> > + return -EINVAL;
> > +}
> > +
> > typedef int (*xe_oa_set_property_fn)(struct xe_oa *oa, u64 value,
> > struct xe_oa_open_param *param);
> > static const xe_oa_set_property_fn xe_oa_set_property_funcs[] = {
>
>
> Perhaps we should consider renaming this to match the later funcs array.
> "xe_oa_set_property_funcs_open" for example?
> Just a suggestion, not blocking.
OK I went ahead and made this change in v3. Increases the patch footprint a
bit but makes it clearer.
>
>
> > @@ -1262,8 +1273,22 @@ static const xe_oa_set_property_fn xe_oa_set_property_funcs[] = {
> > [DRM_XE_OA_PROPERTY_SYNCS] = xe_oa_set_prop_syncs_user,
> > };
> >
> > -static int xe_oa_user_ext_set_property(struct xe_oa *oa, u64 extension,
> > - struct xe_oa_open_param *param)
> > +static const xe_oa_set_property_fn xe_oa_set_property_funcs_config[] = {
> > + [DRM_XE_OA_PROPERTY_OA_UNIT_ID] = xe_oa_set_prop_ret_inval,
> > + [DRM_XE_OA_PROPERTY_SAMPLE_OA] = xe_oa_set_prop_ret_inval,
> > + [DRM_XE_OA_PROPERTY_OA_METRIC_SET] = xe_oa_set_prop_metric_set,
> > + [DRM_XE_OA_PROPERTY_OA_FORMAT] = xe_oa_set_prop_ret_inval,
> > + [DRM_XE_OA_PROPERTY_OA_PERIOD_EXPONENT] = xe_oa_set_prop_ret_inval,
> > + [DRM_XE_OA_PROPERTY_OA_DISABLED] = xe_oa_set_prop_ret_inval,
> > + [DRM_XE_OA_PROPERTY_EXEC_QUEUE_ID] = xe_oa_set_prop_ret_inval,
> > + [DRM_XE_OA_PROPERTY_OA_ENGINE_INSTANCE] = xe_oa_set_prop_ret_inval,
> > + [DRM_XE_OA_PROPERTY_NO_PREEMPT] = xe_oa_set_prop_ret_inval,
> > + [DRM_XE_OA_PROPERTY_NUM_SYNCS] = xe_oa_set_prop_num_syncs,
> > + [DRM_XE_OA_PROPERTY_SYNCS] = xe_oa_set_prop_syncs_user,
> > +};
> > +
> > +static int xe_oa_user_ext_set_property(struct xe_oa *oa, enum xe_oa_user_extn_from from,
> > + u64 extension, struct xe_oa_open_param *param)
> > {
> > u64 __user *address = u64_to_user_ptr(extension);
> > struct drm_xe_ext_set_property ext;
> > @@ -1279,18 +1304,22 @@ static int xe_oa_user_ext_set_property(struct xe_oa *oa, u64 extension,
> > return -EINVAL;
> >
> > idx = array_index_nospec(ext.property, ARRAY_SIZE(xe_oa_set_property_funcs));
> > - return xe_oa_set_property_funcs[idx](oa, ext.value, param);
> > +
> > + if (from == XE_OA_USER_EXTN_FROM_CONFIG)
> > + return xe_oa_set_property_funcs_config[idx](oa, ext.value, param);
> > + else
> > + return xe_oa_set_property_funcs[idx](oa, ext.value, param);
>
>
> If we want to extend this in the future, we might want a map between the
> xe_oa_user_extn_from enum and the xe_oa_set_property_funcs_config.
>
> Something like:
>
> """
> static const xe_oa_set_property_fn xe_oa_set_property_funcs_list[][] {
> [XE_OA_USER_EXTN_FROM_OPEN] = xe_oa_set_property_funcs,
> [XE_OA_USER_EXTN_FROM_CONFIG] = xe_oa_set_property_funcs_config,
> };
> """
>
> Then, here, we'd just need to do something like:
>
> """
> return xe_oa_set_property_funcs_list[from][idx](oa, ext.value, param);
> """
>
> I don't think this is strictly necessary, though.
This one I was tempted to make too, but then I let it be. I don't think we
are expecting more code paths where we expect this to happen. But thanks
for the suggestion, it is a good one.
Thanks.
--
Ashutosh
> > }
> >
> > -typedef int (*xe_oa_user_extension_fn)(struct xe_oa *oa, u64 extension,
> > - struct xe_oa_open_param *param);
> > +typedef int (*xe_oa_user_extension_fn)(struct xe_oa *oa, enum xe_oa_user_extn_from from,
> > + u64 extension, struct xe_oa_open_param *param);
> > static const xe_oa_user_extension_fn xe_oa_user_extension_funcs[] = {
> > [DRM_XE_OA_EXTENSION_SET_PROPERTY] = xe_oa_user_ext_set_property,
> > };
> >
> > #define MAX_USER_EXTENSIONS 16
> > -static int xe_oa_user_extensions(struct xe_oa *oa, u64 extension, int ext_number,
> > - struct xe_oa_open_param *param)
> > +static int xe_oa_user_extensions(struct xe_oa *oa, enum xe_oa_user_extn_from from, u64 extension,
> > + int ext_number, struct xe_oa_open_param *param)
> > {
> > u64 __user *address = u64_to_user_ptr(extension);
> > struct drm_xe_user_extension ext;
> > @@ -1309,12 +1338,12 @@ static int xe_oa_user_extensions(struct xe_oa *oa, u64 extension, int ext_number
> > return -EINVAL;
> >
> > idx = array_index_nospec(ext.name, ARRAY_SIZE(xe_oa_user_extension_funcs));
> > - err = xe_oa_user_extension_funcs[idx](oa, extension, param);
> > + err = xe_oa_user_extension_funcs[idx](oa, from, extension, param);
> > if (XE_IOCTL_DBG(oa->xe, err))
> > return err;
> >
> > if (ext.next_extension)
> > - return xe_oa_user_extensions(oa, ext.next_extension, ++ext_number, param);
> > + return xe_oa_user_extensions(oa, from, ext.next_extension, ++ext_number, param);
> >
> > return 0;
> > }
> > @@ -1460,7 +1489,7 @@ static long xe_oa_config_locked(struct xe_oa_stream *stream, u64 arg)
> > struct xe_oa_config *config;
> > int err;
> >
> > - err = xe_oa_user_extensions(stream->oa, arg, 0, ¶m);
> > + err = xe_oa_user_extensions(stream->oa, XE_OA_USER_EXTN_FROM_CONFIG, arg, 0, ¶m);
> > if (err)
> > return err;
> >
> > @@ -2011,7 +2040,7 @@ int xe_oa_stream_open_ioctl(struct drm_device *dev, u64 data, struct drm_file *f
> > }
> >
> > param.xef = xef;
> > - ret = xe_oa_user_extensions(oa, data, 0, ¶m);
> > + ret = xe_oa_user_extensions(oa, XE_OA_USER_EXTN_FROM_OPEN, data, 0, ¶m);
> > if (ret)
> > return ret;
> >
> > --
> > 2.41.0
> >
> >
next prev parent reply other threads:[~2024-08-21 15:30 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-20 0:58 [PATCH v2 0/7] drm/xe/oa: xe_syncs for OA Ashutosh Dixit
2024-08-20 0:58 ` [PATCH 1/7] drm/xe/oa: Separate batch submission from waiting for completion Ashutosh Dixit
2024-08-20 0:58 ` [PATCH 2/7] drm/xe/oa/uapi: Define and parse OA sync properties Ashutosh Dixit
2024-08-20 0:58 ` [PATCH 3/7] drm/xe/oa: Add input fence dependencies Ashutosh Dixit
2024-08-20 0:58 ` [PATCH 4/7] drm/xe/oa: Signal output fences Ashutosh Dixit
2024-08-20 19:23 ` Matthew Brost
2024-08-21 15:20 ` Dixit, Ashutosh
2024-08-21 16:02 ` Matthew Brost
2024-08-20 0:58 ` [PATCH 5/7] drm/xe/oa: Move functions up so they can be reused for config ioctl Ashutosh Dixit
2024-08-20 0:58 ` [PATCH 6/7] drm/xe/oa: Add syncs support to OA " Ashutosh Dixit
2024-08-20 0:58 ` [PATCH 7/7] drm/xe/oa: Allow only certain property changes from config Ashutosh Dixit
2024-08-20 14:15 ` Cavitt, Jonathan
2024-08-21 15:19 ` Dixit, Ashutosh [this message]
2024-08-20 1:03 ` ✓ CI.Patch_applied: success for drm/xe/oa: xe_syncs for OA (rev2) Patchwork
2024-08-20 1:04 ` ✓ CI.checkpatch: " Patchwork
2024-08-20 1:05 ` ✓ CI.KUnit: " Patchwork
2024-08-20 1:17 ` ✓ CI.Build: " Patchwork
2024-08-20 1:19 ` ✓ CI.Hooks: " Patchwork
2024-08-20 1:20 ` ✓ CI.checksparse: " Patchwork
2024-08-20 1:40 ` ✓ CI.BAT: " Patchwork
2024-08-20 9:37 ` ✗ CI.FULL: failure " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2024-08-21 15:28 [PATCH v3 0/7] drm/xe/oa: xe_syncs for OA Ashutosh Dixit
2024-08-21 15:28 ` [PATCH 7/7] drm/xe/oa: Allow only certain property changes from config Ashutosh Dixit
2024-08-28 1:50 [PATCH v4 0/7] drm/xe/oa: xe_syncs for OA Ashutosh Dixit
2024-08-28 1:50 ` [PATCH 7/7] drm/xe/oa: Allow only certain property changes from config Ashutosh Dixit
2024-08-30 22:16 [PATCH v5 0/7] drm/xe/oa: xe_syncs for OA Ashutosh Dixit
2024-08-30 22:16 ` [PATCH 7/7] drm/xe/oa: Allow only certain property changes from config Ashutosh Dixit
2024-09-18 19:53 [PATCH v6 0/7] drm/xe/oa: xe_syncs for OA Ashutosh Dixit
2024-09-18 19:53 ` [PATCH 7/7] drm/xe/oa: Allow only certain property changes from config Ashutosh Dixit
2024-10-22 20:03 [PATCH v7 0/7] drm/xe/oa: xe_syncs for OA Ashutosh Dixit
2024-10-22 20:03 ` [PATCH 7/7] drm/xe/oa: Allow only certain property changes from config Ashutosh Dixit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877cc99a3n.wl-ashutosh.dixit@intel.com \
--to=ashutosh.dixit@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=jonathan.cavitt@intel.com \
--cc=jose.souza@intel.com \
--cc=lionel.g.landwerlin@intel.com \
--cc=matthew.brost@intel.com \
--cc=umesh.nerlige.ramappa@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox