Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Hogander, Jouni" <jouni.hogander@intel.com>
To: "intel-xe@lists.freedesktop.org" <intel-xe@lists.freedesktop.org>,
	"Manna,  Animesh" <animesh.manna@intel.com>,
	"intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>
Cc: "Murthy, Arun R" <arun.r.murthy@intel.com>,
	"Nikula, Jani" <jani.nikula@intel.com>
Subject: Re: [PATCH v4] drm/i915/display: Panel Replay BW optimization for DP2.0 tunneling
Date: Mon, 2 Mar 2026 07:09:41 +0000	[thread overview]
Message-ID: <9c59cb73d9c9733ebc33ede88146b3655aefabc0.camel@intel.com> (raw)
In-Reply-To: <20260227093923.3170382-1-animesh.manna@intel.com>

On Fri, 2026-02-27 at 15:09 +0530, Animesh Manna wrote:
> Unused bandwidth can be used by external display agents for Panel
> Replay
> enabled DP panel during idleness with link on. Enable source to
> replace
> dummy data from the display with data from another agent by
> programming
> TRANS_DP2_CTL [Panel Replay Tunneling Enable].
> 
> v2:
> - Enable pr bw optimization along with panel replay enable. [Jani]
> 
> v3:
> - Write TRANS_DP2_CTL once for both bw optimization and panel replay
> enable. [Jani]
> 
> v4:
> - Read DPCD once in init() and store in panel_replay_caps. [Jouni]
> 
> Bspec: 68920
> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
> Signed-off-by: Animesh Manna <animesh.manna@intel.com>
> ---
>  .../gpu/drm/i915/display/intel_display_regs.h |  1 +
>  .../drm/i915/display/intel_display_types.h    |  1 +
>  drivers/gpu/drm/i915/display/intel_dp.c       |  1 +
>  drivers/gpu/drm/i915/display/intel_psr.c      | 30
> +++++++++++++++++--
>  4 files changed, 31 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display_regs.h
> b/drivers/gpu/drm/i915/display/intel_display_regs.h
> index 49e2a9e3ee0e..71411b26e918 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_regs.h
> @@ -2265,6 +2265,7 @@
>  #define TRANS_DP2_CTL(trans)			_MMIO_TRANS(trans,
> _TRANS_DP2_CTL_A, _TRANS_DP2_CTL_B)
>  #define  TRANS_DP2_128B132B_CHANNEL_CODING	REG_BIT(31)
>  #define  TRANS_DP2_PANEL_REPLAY_ENABLE		REG_BIT(30)
> +#define  TRANS_DP2_PR_TUNNELING_ENABLE		REG_BIT(26)
>  #define  TRANS_DP2_DEBUG_ENABLE			REG_BIT(23)
>  
>  #define _TRANS_DP2_VFREQHIGH_A			0x600a4
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> b/drivers/gpu/drm/i915/display/intel_display_types.h
> index e8e4af03a6a6..0b30f9085afb 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -576,6 +576,7 @@ struct intel_connector {
>  
>  			bool support;
>  			bool su_support;
> +			bool optimization_support;
>  			enum intel_panel_replay_dsc_support
> dsc_support;
>  
>  			u16 su_w_granularity;
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index 025e906b63a9..f35aafe1e86f 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -6250,6 +6250,7 @@ intel_dp_detect(struct drm_connector
> *_connector,
>  		intel_dp->psr.sink_panel_replay_support = false;
>  		connector->dp.panel_replay_caps.support = false;
>  		connector->dp.panel_replay_caps.su_support = false;
> +		connector->dp.panel_replay_caps.optimization_support
> = false;
>  		connector->dp.panel_replay_caps.dsc_support =
>  			INTEL_DP_PANEL_REPLAY_DSC_NOT_SUPPORTED;
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
> b/drivers/gpu/drm/i915/display/intel_psr.c
> index 5bea2eda744b..dc3e4d8885fa 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.c
> +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> @@ -43,6 +43,7 @@
>  #include "intel_dmc.h"
>  #include "intel_dp.h"
>  #include "intel_dp_aux.h"
> +#include "intel_dp_tunnel.h"
>  #include "intel_dsb.h"
>  #include "intel_frontbuffer.h"
>  #include "intel_hdmi.h"
> @@ -603,6 +604,7 @@ static void _panel_replay_init_dpcd(struct
> intel_dp *intel_dp, struct intel_conn
>  {
>  	struct intel_display *display = to_intel_display(intel_dp);
>  	int ret;
> +	u8 val;
>  
>  	/* TODO: Enable Panel Replay on MST once it's properly
> implemented. */
>  	if (intel_dp->mst_detect == DRM_DP_MST)
> @@ -650,6 +652,10 @@ static void _panel_replay_init_dpcd(struct
> intel_dp *intel_dp, struct intel_conn
>  		    connector->dp.panel_replay_caps.su_support ?
>  		    "selective_update " : "",
>  		    panel_replay_dsc_support_str(connector-
> >dp.panel_replay_caps.dsc_support));
> +

I would add this:

if (intel_dp_is_edp(intel_dp))
    return;

/* Rest is for DP only */

> +	drm_dp_dpcd_readb(&intel_dp->aux, DP_TUNNELING_CAPABILITIES,
> &val);
> +	connector->dp.panel_replay_caps.optimization_support =
> +		(val & DP_PANEL_REPLAY_OPTIMIZATION_SUPPORT) ? true
> : false;
>  }
>  
>  static void _psr_init_dpcd(struct intel_dp *intel_dp, struct
> intel_connector *connector)
> @@ -1022,11 +1028,29 @@ static u8 frames_before_su_entry(struct
> intel_dp *intel_dp)
>  	return frames_before_su_entry;
>  }
>  
> +static bool intel_psr_allow_pr_bw_optimization(struct intel_dp
> *intel_dp)
> +{
> +	struct intel_display *display = to_intel_display(intel_dp);
> +	struct intel_connector *connector = intel_dp-
> >attached_connector;
> +
> +	if (DISPLAY_VER(display) < 35)
> +		return false;
> +
> +	if (!intel_dp_tunnel_bw_alloc_is_enabled(intel_dp))
> +		return false;
> +
> +	if (!(connector->dp.panel_replay_caps.optimization_support))
> +		return false;
> +
> +	return true;
> +}
> +
>  static void dg2_activate_panel_replay(struct intel_dp *intel_dp)
>  {
>  	struct intel_display *display = to_intel_display(intel_dp);
>  	struct intel_psr *psr = &intel_dp->psr;
>  	enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
> +	u32 dp2_ctl_val = TRANS_DP2_PANEL_REPLAY_ENABLE;
>  
>  	if (intel_dp_is_edp(intel_dp) && psr->sel_update_enabled) {
>  		u32 val = psr->su_region_et_enabled ?
> @@ -1039,12 +1063,14 @@ static void dg2_activate_panel_replay(struct
> intel_dp *intel_dp)
>  			       val);
>  	}
>  
> +	if (!intel_dp_is_edp(intel_dp) &&
> intel_psr_allow_pr_bw_optimization(intel_dp))
> +		dp2_ctl_val |= TRANS_DP2_PR_TUNNELING_ENABLE;
> +
>  	intel_de_rmw(display,
>  		     PSR2_MAN_TRK_CTL(display, intel_dp-
> >psr.transcoder),
>  		     0,
> ADLP_PSR2_MAN_TRK_CTL_SF_CONTINUOS_FULL_FRAME);
>  
> -	intel_de_rmw(display, TRANS_DP2_CTL(intel_dp-
> >psr.transcoder), 0,
> -		     TRANS_DP2_PANEL_REPLAY_ENABLE);
> +	intel_de_rmw(display, TRANS_DP2_CTL(intel_dp-
> >psr.transcoder), 0, dp2_ctl_val);
>  }
>  
>  static void hsw_activate_psr2(struct intel_dp *intel_dp)


  parent reply	other threads:[~2026-03-02  7:09 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-27  9:39 [PATCH v4] drm/i915/display: Panel Replay BW optimization for DP2.0 tunneling Animesh Manna
2026-02-27 10:16 ` ✓ CI.KUnit: success for drm/i915/display: Panel Replay BW optimization for DP2.0 tunneling (rev7) Patchwork
2026-02-27 10:59 ` ✓ Xe.CI.BAT: " Patchwork
2026-02-27 18:21 ` ✗ Xe.CI.FULL: failure " Patchwork
2026-03-02  7:09 ` Hogander, Jouni [this message]
2026-03-02  9:54 ` [PATCH v4] drm/i915/display: Panel Replay BW optimization for DP2.0 tunneling Jani Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9c59cb73d9c9733ebc33ede88146b3655aefabc0.camel@intel.com \
    --to=jouni.hogander@intel.com \
    --cc=animesh.manna@intel.com \
    --cc=arun.r.murthy@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox