Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Matthew Brost <matthew.brost@intel.com>
To: "Hajda, Andrzej" <andrzej.hajda@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>,
	<intel-xe@lists.freedesktop.org>,
	Maciej Patelczyk <maciej.patelczyk@intel.com>,
	Jonathan Cavitt <jonathan.cavitt@intel.com>
Subject: Re: [PATCH 12/18] drm/xe/eudebug: implement userptr_vma access
Date: Thu, 24 Oct 2024 16:06:27 +0000	[thread overview]
Message-ID: <Zxpwg6GyMAg35L4+@DUT025-TGLU.fm.intel.com> (raw)
In-Reply-To: <3afce3a1-5ae1-4c87-9bb1-838be1c8d951@intel.com>

On Wed, Oct 23, 2024 at 01:32:53PM +0200, Hajda, Andrzej wrote:
> W dniu 22.10.2024 o 00:34, Matthew Brost pisze:
> > On Mon, Oct 21, 2024 at 11:54:30AM +0200, Hajda, Andrzej wrote:
> > > W dniu 20.10.2024 o 20:16, Matthew Brost pisze:
> > > > On Tue, Oct 01, 2024 at 05:43:00PM +0300, Mika Kuoppala wrote:
> > > > > From: Andrzej Hajda <andrzej.hajda@intel.com>
> > > > > 
> > > > > Debugger needs to read/write program's vmas including
> > > > > userptr_vma. Since hmm_range_fault is used to pin userptr
> > > > > vmas, it is possible to map those vmas from debugger
> > > > > context.
> > > > > 
> > > > > v2: pin pages vs notifier, move to vm.c (Matthew)
> > > > > 
> > > > > Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
> > > > > Signed- off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
> > > > > Signed- off-by: Mika Kuoppala
> > > > > <mika.kuoppala@linux.intel.com> Reviewed- by: Jonathan
> > > > > Cavitt <jonathan.cavitt@intel.com> --- drivers/
> > > > > gpu/drm/xe/xe_eudebug.c |  2 +- drivers/gpu/drm/xe/ xe_vm.c
> > > > > | 47 +++++++++++++++++++++++++++++++++ drivers/
> > > > > gpu/drm/xe/xe_vm.h      |  3 +++ 3 files changed, 51
> > > > > insertions(+), 1 deletion(-)
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/xe/xe_eudebug.c b/drivers/gpu/
> > > > > drm/ xe/xe_eudebug.c index edad6d533d0b..b09d7414cfe3 100644
> > > > > --- a/ drivers/gpu/drm/xe/xe_eudebug.c +++
> > > > > b/drivers/gpu/drm/ xe/ xe_eudebug.c @@ -3023,7 +3023,7 @@
> > > > > static int xe_eudebug_vma_access(struct xe_vma *vma, u64
> > > > > offset, return ret; } -	return -EINVAL; +	return
> > > > > xe_uvma_access(to_userptr_vma(vma), offset, buf, bytes,
> > > > > write); } static int xe_eudebug_vm_access(struct xe_vm *vm,
> > > > > u64 offset, diff --git a/drivers/gpu/drm/xe/xe_vm.c b/
> > > > > drivers/ gpu/drm/xe/xe_vm.c index a836dfc5a86f..5f891e76993b
> > > > > 100644 --- a/drivers/gpu/drm/xe/xe_vm.c +++ b/drivers/gpu/drm/
> > > > > xe/xe_vm.c @@ -3421,3 +3421,50 @@ void
> > > > > xe_vm_snapshot_free(struct xe_vm_snapshot *snap) }
> > > > > kvfree(snap); } + +int xe_uvma_access(struct xe_userptr_vma
> > > > > *uvma, u64 offset, + void *buf, u64 len, bool write) +{
> > > > 
> > > > Maybe dump question but are we overthinking this here?
> > > > 
> > > > Can we just use kthread_use_mm, copy_to_user, copy_from_user?
> > > > 
> > > > If not then my previous comments still apply here.
> > > 
> > > This function is called from debugger process context and
> > > kthread_use_mm is allowed only from kthread. Spawning kthread
> > > just for this is an option but looks odd and suboptimal, could be
> > > kind of last resort, or not?
> > > 
> > > Another options: 1. Keep reference to remote task in xe_userptr and
> > > use access_process_vm(up->task, ...).
> > > 
> > 
> > I think remote refs are generally a bad idea but admittedly don't fully
> > understand what this would look like.
> > 
> > > 2. Pass xe_eudebug.target_task reference down from eudebug framework
> > > to this helper and use access_process_vm. Current call chain is:
> > > __xe_eudebug_vm_access - has access to xe_eudebug.target_task
> > > ->__vm_read_write --->xe_eudebug_vm_access ---->xe_eudebug_vm_access
> > > ----->xe_eudebug_vma_access ------
> > > > xe_vm_userptr_access So to achieve this multiple changes are
> > > required, but maybe it is valid path to go? One potential issue with
> > > 1 and 2 is that multiple UMD tests were failing when
> > > access_process_vm/access_remote_vm were used, they were not
> > > investigated as this approach was dropped due to different reasons.
> > > 
> > > 3. Continue approach from this patch, but with corrected page
> > > iterator of up->sg sg list[1]. This was nacked by you(?) [2] but
> > > I have problem understanding why? I see lot of code in kernel
> > > mapping sg pages: linux$ git grep ' kmap.*sg' | wc -l
> > 
> > I looked here every example I found has mapping and accessing 1
> > page at time not mapping 1 page and accessing many.
> > 
> > > 61 Is it incorrect? Or our case is different?
> > > 
> > 
> > A sglist segments are dma-addresses (virtual address), thus every
> > 4k in the segment can be a different physical page.
> 
> sglist is also list of pages and their lengths (in case of consecutive
> pages, they are glued together), i.e. exactly what we need. And this is
> done in xe_build_sg: it calls sg_alloc_table_from_pages_segment which
> is documented as follows:
> ...
> * Allocate and initialize an sg table from a list of pages. Contiguous
> * ranges of the pages are squashed into a single scatterlist node up to the
> * maximum size specified in @max_segment. A user may provide an offset at a
> * start and a size of valid data in a buffer specified by the page array.
> ...
> So sglist contains the same information as hmm_range->hmm_pfns[i] and little
> more.
> 
> So my concern is if mapping operation can destroy this info, but looking at
> the code this does not seems to be the case. For example iommu_dma_map_sg
> docs explicitly says about "preserve the original offsets and sizes for the
> caller".
> 
> 
> > 
> > i.e., look at this snippet:
> > 
> > +		void *ptr = kmap_local_page(sg_page(cur.sgl)) + cur.start; + +
> > cur_len = min(cur.size, cur.remaining); +		if (write) + memcpy(ptr, buf,
> > cur_len); +		else +			memcpy(buf, ptr, cur_len); + kunmap_local(ptr);
> > 
> > If 'cur.start' > 4k, then you are potentially pointing to an incorrect
> > page and corrupting memory.
> 
> With added possibility to iterate over sgl pages in xe_res_cursor[1] it does
> not seems to be true.
> Why? cur.start is limited by length of the segment (cur.sgl->length), if it
> happens to be more than 4k, it means sg_page(cur.sgl) points to consecutive
> pages and cur.start is correct.
> 

I suppose if the cursor is changed to walk the pages not the dma
address, yea i guess this would work. Still my much prefered way would
just call hmm_range_fault or optionally save off the pages in
xe_vma_userptr_pin_pages given at some point we will ditch SG tables for
userptr in favor of drm gpusvm which will be page based.

Matt

> > 
> > Likewise if 'cur_len' > 4k, then you are potentially pointing to an
> > incorrect page and corrupting memory.
> 
> Again, in case of consecutive pages it should be in range.
> 
> Anyway if there is an issue with consecutive pages, which I am not aware of,
> we can always build sg list with segments pointing to 4K pages by
> modyfing xe_build_sg to call sg_alloc_table_from_pages_segment with 4K max
> segment size.
> 
> [1]: https://lore.kernel.org/intel-xe/20241011-xe_res_cursor_add_page_iterator-v3-1-0f8b8d3ab021@intel.com/
> 
> Regards
> Andrzej
> 
> > 
> > This loop would have to be changed to something like below which kmaps
> > and accesses 1 page at a time...  for (xe_res_first_sg(up-
> > >sg, offset, len, &cur); cur.remaining; xe_res_next(&cur, cur_len))
> > { int segment_len; int remain;
> > 
> > cur_len = min(cur.size, cur.remaining); remain = cur_len;
> > 
> > for (i = 0; i < cur_len; i += segment_len) { phys_addr_t phys =
> > iommu_iova_to_phys(sg_dma_address(cur.sgl) + i + cur.start); struct page
> > *page = phys_to_page(phys); void *ptr = kmap_local_page(page); int
> > ptr_offset = offset & ~PAGE_MASK;
> > 
> > segment_len = min(remain, PAGE_SIZE - ptr_offset);
> > 
> > if (write) memcpy(ptr + ptr_offset, buf + i, segment_len); else
> > memcpy(buf + i, ptr + ptr_offset, segment_len); kunmap_local(ptr);
> > 
> > offset += segment_len; remain -= segment_len; }  buf += cur_len; }
> > 
> > > 4. As you suggested in [3](?), modify xe_hmm_userptr_populate_range
> > > to keep hmm_range.hmm_pfns(or sth similar) in xe_userptr and use it
> > > later (instead of up->sg) to iterate over pages.
> > > 
> > 
> > Or just call hmm_range_fault directly here and operate on returned pages
> > directly.
> > 
> > BTW eventually all the userptr stuff is going to change and be
> > based on GPU SVM [4]. Calling hmm_range_fault directly will always
> > work though and likely the safest option.
> > 
> > Matt
> > 
> > [4] https://patchwork.freedesktop.org/patch/619809/? series=137870&rev=2
> > 
> > > [1]: https://lore.kernel.org/intel-xe/20241011-
> > > xe_res_cursor_add_page_iterator-v3-1-0f8b8d3ab021@intel.com/ [2]:
> > > https://lore.kernel.org/intel-xe/Zw32fauoUmB6Iojk@DUT025-
> > > TGLU.fm.intel.com/ [3]: https://patchwork.freedesktop.org/
> > > patch/617481/?series=136572&rev=2#comment_1126527
> > > 
> > > Regards Andrzej
> > > 
> > > > 
> > > > Matt
> > > > 
> > > > > +	struct xe_vm *vm = xe_vma_vm(&uvma->vma); +	struct
> > > > > xe_userptr *up = &uvma->userptr; +	struct xe_res_cursor cur
> > > > > = {}; +	int cur_len, ret = 0; + +	while (true) { +
> > > > > down_read(&vm-
> > > > > > userptr.notifier_lock); +		if (!
> > > > > xe_vma_userptr_check_repin(uvma)) +			break; + +
> > > > > spin_lock(&vm-
> > > > > > userptr.invalidated_lock); + list_del_init(&uvma-
> > > > > > userptr.invalidate_link); + spin_unlock(&vm-
> > > > > > userptr.invalidated_lock); + +		up_read(&vm-
> > > > > > userptr.notifier_lock); +		ret =
> > > > > xe_vma_userptr_pin_pages(uvma); +		if (ret) +			return ret;
> > > > > +	} + +	if (!up->sg) { +		ret = -EINVAL; +		goto
> > > > > out_unlock_notifier; +	} + +	for (xe_res_first_sg(up->sg,
> > > > > offset, len, &cur); cur.remaining; +	     xe_res_next(&cur,
> > > > > cur_len)) { +		void *ptr = kmap_local_page(sg_page(cur.sgl))
> > > > > + cur.start; + +		cur_len = min(cur.size, cur.remaining); +
> > > > > if (write) +			memcpy(ptr, buf, cur_len); +		else +
> > > > > memcpy(buf, ptr, cur_len); +		kunmap_local(ptr); +		buf +=
> > > > > cur_len; +	} + ret = len; + +out_unlock_notifier: +
> > > > > up_read(&vm-
> > > > > > userptr.notifier_lock); +	return ret; +} diff --git a/
> > > > > > drivers/
> > > > > gpu/drm/xe/xe_vm.h b/drivers/gpu/drm/xe/xe_vm.h index
> > > > > c864dba35e1d..99b9a9b011de 100644 --- a/drivers/gpu/drm/xe/
> > > > > xe_vm.h +++ b/drivers/gpu/drm/xe/xe_vm.h @@ -281,3 +281,6 @@
> > > > > struct xe_vm_snapshot *xe_vm_snapshot_capture(struct xe_vm
> > > > > *vm); void xe_vm_snapshot_capture_delayed(struct
> > > > > xe_vm_snapshot *snap); void xe_vm_snapshot_print(struct
> > > > > xe_vm_snapshot *snap, struct drm_printer *p); void
> > > > > xe_vm_snapshot_free(struct xe_vm_snapshot *snap); + +int
> > > > > xe_uvma_access(struct xe_userptr_vma *uvma, u64 offset, +
> > > > > void *buf, u64 len, bool write); -- 2.34.1
> > > > > 
> > > 
> 

  reply	other threads:[~2024-10-24 16:06 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-01 14:42 [PATCH 00/18] GPU debug support (eudebug) v2 Mika Kuoppala
2024-10-01 14:42 ` [PATCH 01/18] ptrace: export ptrace_may_access Mika Kuoppala
2024-10-01 14:42 ` [PATCH 02/18] drm/xe/eudebug: Introduce eudebug support Mika Kuoppala
2024-10-01 14:42 ` [PATCH 03/18] drm/xe/eudebug: Introduce discovery for resources Mika Kuoppala
2024-10-03  0:41   ` Matthew Brost
2024-10-03  7:27     ` Mika Kuoppala
2024-10-03 16:32       ` Matthew Brost
2024-10-01 14:42 ` [PATCH 04/18] drm/xe/eudebug: Introduce exec_queue events Mika Kuoppala
2024-10-01 14:42 ` [PATCH 05/18] drm/xe/eudebug: hw enablement for eudebug Mika Kuoppala
2024-10-01 14:42 ` [PATCH 06/18] drm/xe: Add EUDEBUG_ENABLE exec queue property Mika Kuoppala
2024-10-01 14:42 ` [PATCH 07/18] drm/xe/eudebug: Introduce per device attention scan worker Mika Kuoppala
2024-10-01 14:42 ` [PATCH 08/18] drm/xe/eudebug: Introduce EU control interface Mika Kuoppala
2024-10-01 14:42 ` [PATCH 09/18] drm/xe/eudebug: Add vm bind and vm bind ops Mika Kuoppala
2024-10-01 14:42 ` [PATCH 10/18] drm/xe/eudebug: Add UFENCE events with acks Mika Kuoppala
2024-10-01 14:42 ` [PATCH 11/18] drm/xe/eudebug: vm open/pread/pwrite Mika Kuoppala
2024-10-01 14:43 ` [PATCH 12/18] drm/xe/eudebug: implement userptr_vma access Mika Kuoppala
2024-10-05  3:48   ` Matthew Brost
2024-10-12  2:39   ` Matthew Brost
2024-10-12  2:55     ` Matthew Brost
2024-10-20 18:16   ` Matthew Brost
2024-10-21  9:54     ` Hajda, Andrzej
2024-10-21 22:34       ` Matthew Brost
2024-10-23 11:32         ` Hajda, Andrzej
2024-10-24 16:06           ` Matthew Brost [this message]
2024-10-25 13:20             ` Hajda, Andrzej
2024-10-25 18:23               ` Matthew Brost
2024-10-28 16:19                 ` [PATCH 1/2] drm/xe: keep list of system pages in xe_userptr Andrzej Hajda
2024-10-28 16:19                 ` [PATCH 2/2] drm/xe/eudebug: implement userptr_vma access Andrzej Hajda
2024-10-28 16:55                   ` Hajda, Andrzej
2024-10-01 14:43 ` [PATCH 13/18] drm/xe: Debug metadata create/destroy ioctls Mika Kuoppala
2024-10-01 16:25   ` Matthew Auld
2024-10-02 13:59     ` Grzegorzek, Dominik
2024-10-01 14:43 ` [PATCH 14/18] drm/xe: Attach debug metadata to vma Mika Kuoppala
2024-10-01 14:43 ` [PATCH 15/18] drm/xe/eudebug: Add debug metadata support for xe_eudebug Mika Kuoppala
2024-10-01 14:43 ` [PATCH 16/18] drm/xe/eudebug: Implement vm_bind_op discovery Mika Kuoppala
2024-10-01 14:43 ` [PATCH 17/18] drm/xe/eudebug: Dynamically toggle debugger functionality Mika Kuoppala
2024-10-01 14:43 ` [PATCH 18/18] drm/xe/eudebug_test: Introduce xe_eudebug wa kunit test Mika Kuoppala
2024-10-01 15:02 ` ✓ CI.Patch_applied: success for GPU debug support (eudebug) (rev2) Patchwork
2024-10-01 15:03 ` ✗ CI.checkpatch: warning " Patchwork
2024-10-01 15:03 ` ✗ CI.KUnit: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Zxpwg6GyMAg35L4+@DUT025-TGLU.fm.intel.com \
    --to=matthew.brost@intel.com \
    --cc=andrzej.hajda@intel.com \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=jonathan.cavitt@intel.com \
    --cc=maciej.patelczyk@intel.com \
    --cc=mika.kuoppala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox