From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: "Jouni Högander" <jouni.hogander@intel.com>
Cc: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Subject: Re: [PATCH] drm/i915/display: Take into account AS SDP in intel_dp_sdp_min_guardband
Date: Wed, 22 Oct 2025 18:37:16 +0300 [thread overview]
Message-ID: <aPj6LCMluIBg5J1W@intel.com> (raw)
In-Reply-To: <20251022122552.890090-1-jouni.hogander@intel.com>
On Wed, Oct 22, 2025 at 03:25:52PM +0300, Jouni Högander wrote:
> We started seeing "[drm] *ERROR* Timed out waiting PSR idle state" after
> taking optimized guardband into use. These are seen because VSC SDPs are
> sent on same line as AS SDPs when AS SDP is enabled. AS SDP is sent on line
> configured in EMP_AS_SDP_TL register. We are configuring
> crtc_state->vrr.vsync_start into that register.
>
> Fix this by ensuring AS SDP is sent on line which is within
> guardband. From the bspec:
>
> EMP_AS_SDP_TL < SCL + Guardband
>
> Bspec: 71197
>
> Fixes: 52ecd48b8d3f ("drm/i915/dp: Add helper to get min sdp guardband")
> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index b0aeb6c2de86c..54b5e060be82a 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -7026,7 +7026,7 @@ int intel_dp_compute_config_late(struct intel_encoder *encoder,
> }
>
> static
> -int intel_dp_get_lines_for_sdp(u32 type)
> +int intel_dp_get_lines_for_sdp(const struct intel_crtc_state *crtc_state, u32 type)
> {
> switch (type) {
> case DP_SDP_VSC_EXT_VESA:
> @@ -7036,6 +7036,8 @@ int intel_dp_get_lines_for_sdp(u32 type)
> return 8;
> case DP_SDP_PPS:
> return 7;
> + case DP_SDP_ADAPTIVE_SYNC:
> + return crtc_state->vrr.vsync_start + 1;
Is the +1 actually needed? I get the impression the bspec page isn't
being very accurate with the '<' usage.
Hmm, there is an extra note in the EMP_AS_SDP_TL register:
"For DP/eDP, if there is a set context latency (SCL) window, then it
cannot be the first line of SCL
For DP/eDP, if there is no SCL window, then it cannot be the first line
of the Delayed V. Blank"
So I guess there might be a real reason for that extra line.
Though I'm pretty sure no one has even confirmed that we don't have any
off by one errors in EMP_AS_SDP_TL/etc. Should do that at some point...
> default:
> break;
> }
> @@ -7052,11 +7054,18 @@ int intel_dp_sdp_min_guardband(const struct intel_crtc_state *crtc_state,
> crtc_state->infoframes.enable &
> intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA))
> sdp_guardband = max(sdp_guardband,
> - intel_dp_get_lines_for_sdp(HDMI_PACKET_TYPE_GAMUT_METADATA));
> + intel_dp_get_lines_for_sdp(crtc_state,
> + HDMI_PACKET_TYPE_GAMUT_METADATA));
>
> if (assume_all_enabled ||
> crtc_state->dsc.compression_enable)
> - sdp_guardband = max(sdp_guardband, intel_dp_get_lines_for_sdp(DP_SDP_PPS));
> + sdp_guardband = max(sdp_guardband,
> + intel_dp_get_lines_for_sdp(crtc_state, DP_SDP_PPS));
> +
> + if (assume_all_enabled ||
assume_all_enable && HAS_AS_SDP() ?
> + crtc_state->infoframes.enable & intel_hdmi_infoframe_enable(DP_SDP_ADAPTIVE_SYNC))
> + sdp_guardband = max(sdp_guardband,
> + intel_dp_get_lines_for_sdp(crtc_state, DP_SDP_ADAPTIVE_SYNC));
>
> return sdp_guardband;
> }
> --
> 2.43.0
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2025-10-22 15:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-22 12:25 [PATCH] drm/i915/display: Take into account AS SDP in intel_dp_sdp_min_guardband Jouni Högander
2025-10-22 15:37 ` Ville Syrjälä [this message]
2025-10-22 16:08 ` Hogander, Jouni
2025-10-23 6:05 ` Hogander, Jouni
2025-10-22 20:31 ` ✓ CI.KUnit: success for " Patchwork
2025-10-22 21:36 ` ✓ Xe.CI.BAT: " Patchwork
2025-10-23 1:36 ` ✗ Xe.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aPj6LCMluIBg5J1W@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jouni.hogander@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox