From: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
To: Matthew Brost <matthew.brost@intel.com>
Cc: <intel-xe@lists.freedesktop.org>
Subject: Re: [PATCH v3 14/18] drm/xe/multi_queue: Support active group after primary is destroyed
Date: Fri, 21 Nov 2025 22:08:50 -0800 [thread overview]
Message-ID: <aSFTcvJjz6NGS4In@nvishwa1-desk> (raw)
In-Reply-To: <aSFQt7V/R7yjVZhR@lstrano-desk.jf.intel.com>
On Fri, Nov 21, 2025 at 09:57:11PM -0800, Matthew Brost wrote:
>On Thu, Nov 20, 2025 at 07:51:48PM -0800, Niranjana Vishwanathapura wrote:
>> Add support to keep the group active after the primary queue is
>> destroyed. Instead of killing the primary queue during exec_queue
>> destroy ioctl, kill it when all the secondary queues of the group
>> are killed.
>>
>> Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
>> ---
>> drivers/gpu/drm/xe/xe_device.c | 7 ++-
>> drivers/gpu/drm/xe/xe_exec_queue.c | 55 +++++++++++++++++++++++-
>> drivers/gpu/drm/xe/xe_exec_queue.h | 2 +
>> drivers/gpu/drm/xe/xe_exec_queue_types.h | 4 ++
>> include/uapi/drm/xe_drm.h | 4 ++
>> 5 files changed, 69 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/xe/xe_device.c b/drivers/gpu/drm/xe/xe_device.c
>> index 037206c8b543..e72294a7d4b1 100644
>> --- a/drivers/gpu/drm/xe/xe_device.c
>> +++ b/drivers/gpu/drm/xe/xe_device.c
>> @@ -177,7 +177,12 @@ static void xe_file_close(struct drm_device *dev, struct drm_file *file)
>> xa_for_each(&xef->exec_queue.xa, idx, q) {
>> if (q->vm && q->hwe->hw_engine_group)
>> xe_hw_engine_group_del_exec_queue(q->hwe->hw_engine_group, q);
>> - xe_exec_queue_kill(q);
>> +
>> + if (xe_exec_queue_is_multi_queue_primary(q))
>> + xe_exec_queue_group_kill_put(q->multi_queue.group);
>> + else
>> + xe_exec_queue_kill(q);
>> +
>> xe_exec_queue_put(q);
>> }
>> xa_for_each(&xef->vm.xa, idx, vm)
>> diff --git a/drivers/gpu/drm/xe/xe_exec_queue.c b/drivers/gpu/drm/xe/xe_exec_queue.c
>> index ab161b74fef0..839fb08f09e7 100644
>> --- a/drivers/gpu/drm/xe/xe_exec_queue.c
>> +++ b/drivers/gpu/drm/xe/xe_exec_queue.c
>> @@ -417,6 +417,26 @@ struct xe_exec_queue *xe_exec_queue_create_bind(struct xe_device *xe,
>> }
>> ALLOW_ERROR_INJECTION(xe_exec_queue_create_bind, ERRNO);
>>
>> +static void xe_exec_queue_group_kill(struct kref *ref)
>> +{
>> + struct xe_exec_queue_group *group = container_of(ref, struct xe_exec_queue_group,
>> + kill_refcount);
>> + xe_exec_queue_kill(group->primary);
>> +}
>> +
>> +static inline void xe_exec_queue_group_kill_get(struct xe_exec_queue_group *group)
>> +{
>> + kref_get(&group->kill_refcount);
>> +}
>> +
>> +void xe_exec_queue_group_kill_put(struct xe_exec_queue_group *group)
>> +{
>> + if (!group)
>> + return;
>> +
>> + kref_put(&group->kill_refcount, xe_exec_queue_group_kill);
>> +}
>> +
>> void xe_exec_queue_destroy(struct kref *ref)
>> {
>> struct xe_exec_queue *q = container_of(ref, struct xe_exec_queue, refcount);
>> @@ -629,6 +649,7 @@ static int xe_exec_queue_group_init(struct xe_device *xe, struct xe_exec_queue *
>> group->primary = q;
>> group->cgp_bo = bo;
>> INIT_LIST_HEAD(&group->list);
>> + kref_init(&group->kill_refcount);
>> xa_init_flags(&group->xa, XA_FLAGS_ALLOC1);
>> mutex_init(&group->list_lock);
>> q->multi_queue.group = group;
>> @@ -704,6 +725,11 @@ static int xe_exec_queue_group_add(struct xe_device *xe, struct xe_exec_queue *q
>>
>> q->multi_queue.pos = pos;
>>
>> + if (group->primary->multi_queue.keep_active) {
>> + xe_exec_queue_group_kill_get(group);
>> + q->multi_queue.keep_active = true;
>> + }
>> +
>> return 0;
>> }
>>
>> @@ -717,6 +743,11 @@ static void xe_exec_queue_group_delete(struct xe_device *xe, struct xe_exec_queu
>> lrc = xa_erase(&group->xa, q->multi_queue.pos);
>> xe_assert(xe, lrc);
>> xe_lrc_put(lrc);
>> +
>> + if (q->multi_queue.keep_active) {
>> + xe_exec_queue_group_kill_put(group);
>> + q->multi_queue.keep_active = false;
>> + }
>> }
>>
>> static int exec_queue_set_multi_group(struct xe_device *xe, struct xe_exec_queue *q,
>> @@ -735,12 +766,24 @@ static int exec_queue_set_multi_group(struct xe_device *xe, struct xe_exec_queue
>> return -EINVAL;
>>
>> if (value & DRM_XE_MULTI_GROUP_CREATE) {
>> - if (XE_IOCTL_DBG(xe, value & ~DRM_XE_MULTI_GROUP_CREATE))
>> + if (XE_IOCTL_DBG(xe, value & ~(DRM_XE_MULTI_GROUP_CREATE |
>> + DRM_XE_MULTI_GROUP_KEEP_ACTIVE)))
>> + return -EINVAL;
>> +
>> + /*
>> + * KEEP_ACTIVE is not supported in preempt fence mode as in that mode,
>> + * VM_DESTROY ioctl expects all exec queues of that VM are already killed.
>> + */
>
>Is the compute UMD ok with this? I really hope by the time multi-queue
>is enabled in the KMD the compute UMD is only using faulting VMs. Not
>blocker, we likely could actually fix preempt fence mode to avoid this
>restriction, more something we need communicate to the UMDs teams / keep
>an on eye if this becomes an issue.
>
Yes, compute team is fine with using the fault mode.
Niranjana
>Anyways patch LGTM:
>
>Reviewed-by: Matthew Brost <matthew.brost@intel.com>
>
>> + if (XE_IOCTL_DBG(xe, (value & DRM_XE_MULTI_GROUP_KEEP_ACTIVE) &&
>> + xe_vm_in_preempt_fence_mode(q->vm)))
>> return -EINVAL;
>>
>> q->multi_queue.valid = true;
>> q->multi_queue.is_primary = true;
>> q->multi_queue.pos = 0;
>> + if (value & DRM_XE_MULTI_GROUP_KEEP_ACTIVE)
>> + q->multi_queue.keep_active = true;
>> +
>> return 0;
>> }
>>
>> @@ -1286,6 +1329,11 @@ void xe_exec_queue_kill(struct xe_exec_queue *q)
>>
>> q->ops->kill(q);
>> xe_vm_remove_compute_exec_queue(q->vm, q);
>> +
>> + if (!xe_exec_queue_is_multi_queue_primary(q) && q->multi_queue.keep_active) {
>> + xe_exec_queue_group_kill_put(q->multi_queue.group);
>> + q->multi_queue.keep_active = false;
>> + }
>> }
>>
>> int xe_exec_queue_destroy_ioctl(struct drm_device *dev, void *data,
>> @@ -1312,7 +1360,10 @@ int xe_exec_queue_destroy_ioctl(struct drm_device *dev, void *data,
>> if (q->vm && q->hwe->hw_engine_group)
>> xe_hw_engine_group_del_exec_queue(q->hwe->hw_engine_group, q);
>>
>> - xe_exec_queue_kill(q);
>> + if (xe_exec_queue_is_multi_queue_primary(q))
>> + xe_exec_queue_group_kill_put(q->multi_queue.group);
>> + else
>> + xe_exec_queue_kill(q);
>>
>> trace_xe_exec_queue_close(q);
>> xe_exec_queue_put(q);
>> diff --git a/drivers/gpu/drm/xe/xe_exec_queue.h b/drivers/gpu/drm/xe/xe_exec_queue.h
>> index ffcc1feb879e..10abed98fb6b 100644
>> --- a/drivers/gpu/drm/xe/xe_exec_queue.h
>> +++ b/drivers/gpu/drm/xe/xe_exec_queue.h
>> @@ -113,6 +113,8 @@ static inline struct xe_exec_queue *xe_exec_queue_multi_queue_primary(struct xe_
>> return xe_exec_queue_is_multi_queue(q) ? q->multi_queue.group->primary : q;
>> }
>>
>> +void xe_exec_queue_group_kill_put(struct xe_exec_queue_group *group);
>> +
>> bool xe_exec_queue_is_lr(struct xe_exec_queue *q);
>>
>> bool xe_exec_queue_is_idle(struct xe_exec_queue *q);
>> diff --git a/drivers/gpu/drm/xe/xe_exec_queue_types.h b/drivers/gpu/drm/xe/xe_exec_queue_types.h
>> index 5721fb4bad1a..c6b80977ff4f 100644
>> --- a/drivers/gpu/drm/xe/xe_exec_queue_types.h
>> +++ b/drivers/gpu/drm/xe/xe_exec_queue_types.h
>> @@ -62,6 +62,8 @@ struct xe_exec_queue_group {
>> struct list_head list;
>> /** @list_lock: Secondary queue list lock */
>> struct mutex list_lock;
>> + /** @kill_refcount: ref count to kill primary queue */
>> + struct kref kill_refcount;
>> /** @sync_pending: CGP_SYNC_DONE g2h response pending */
>> bool sync_pending;
>> };
>> @@ -159,6 +161,8 @@ struct xe_exec_queue {
>> u8 valid:1;
>> /** @multi_queue.is_primary: Is primary queue (Q0) of the group */
>> u8 is_primary:1;
>> + /** @multi_queue.keep_active: Keep the group active after primary is destroyed */
>> + u8 keep_active:1;
>> } multi_queue;
>>
>> /** @sched_props: scheduling properties */
>> diff --git a/include/uapi/drm/xe_drm.h b/include/uapi/drm/xe_drm.h
>> index 71a851615876..74cbebb24aa5 100644
>> --- a/include/uapi/drm/xe_drm.h
>> +++ b/include/uapi/drm/xe_drm.h
>> @@ -1260,6 +1260,9 @@ struct drm_xe_vm_bind {
>> * then a new multi-queue group is created with this queue as the primary queue
>> * (Q0). Otherwise, the queue gets added to the multi-queue group whose primary
>> * queue's exec_queue_id is specified in the lower 32 bits of the 'value' field.
>> + * If the extension's 'value' field has %DRM_XE_MULTI_GROUP_KEEP_ACTIVE flag
>> + * set, then the multi-queue group is kept active after the primary queue is
>> + * destroyed.
>> * All the other non-relevant bits of extension's 'value' field while adding the
>> * primary or the secondary queues of the group must be set to 0.
>> * - %DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE_PRIORITY - Set the queue
>> @@ -1307,6 +1310,7 @@ struct drm_xe_exec_queue_create {
>> #define DRM_XE_EXEC_QUEUE_SET_PROPERTY_PXP_TYPE 2
>> #define DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_GROUP 3
>> #define DRM_XE_MULTI_GROUP_CREATE (1ull << 63)
>> +#define DRM_XE_MULTI_GROUP_KEEP_ACTIVE (1ull << 62)
>> #define DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE_PRIORITY 4
>> /** @extensions: Pointer to the first extension struct, if any */
>> __u64 extensions;
>> --
>> 2.43.0
>>
next prev parent reply other threads:[~2025-11-22 6:09 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-21 3:51 [PATCH v3 00/18] drm/xe: Multi Queue feature support Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 01/18] drm/xe/multi_queue: Add multi_queue_enable_mask to gt information Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 02/18] drm/xe/multi_queue: Add user interface for multi queue support Niranjana Vishwanathapura
2025-11-21 22:51 ` Matthew Brost
2025-11-22 4:35 ` Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 03/18] drm/xe/multi_queue: Add GuC " Niranjana Vishwanathapura
2025-11-22 22:16 ` Matthew Brost
2025-12-03 3:40 ` Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 04/18] drm/xe/multi_queue: Add multi queue priority property Niranjana Vishwanathapura
2025-11-21 22:57 ` Matthew Brost
2025-11-21 3:51 ` [PATCH v3 05/18] drm/xe/multi_queue: Handle invalid exec queue property setting Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 06/18] drm/xe/multi_queue: Add exec_queue set_property ioctl support Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 07/18] drm/xe/multi_queue: Add support for multi queue dynamic priority change Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 08/18] drm/xe/multi_queue: Add multi queue information to guc_info dump Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 09/18] drm/xe/multi_queue: Handle tearing down of a multi queue Niranjana Vishwanathapura
2025-11-21 23:03 ` Matthew Brost
2025-11-22 4:40 ` Niranjana Vishwanathapura
2025-11-22 5:47 ` Matthew Brost
2025-12-09 3:31 ` Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 10/18] drm/xe/multi_queue: Set QUEUE_DRAIN_MODE for Multi Queue batches Niranjana Vishwanathapura
2025-11-24 18:49 ` Matt Roper
2025-12-02 21:28 ` Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 11/18] drm/xe/multi_queue: Handle CGP context error Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 12/18] drm/xe/multi_queue: Reset GT upon CGP_SYNC failure Niranjana Vishwanathapura
2025-11-21 23:08 ` Matthew Brost
2025-11-21 3:51 ` [PATCH v3 13/18] drm/xe/multi_queue: Tracepoint support Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 14/18] drm/xe/multi_queue: Support active group after primary is destroyed Niranjana Vishwanathapura
2025-11-22 5:57 ` Matthew Brost
2025-11-22 6:08 ` Niranjana Vishwanathapura [this message]
2025-11-21 3:51 ` [PATCH v3 15/18] drm/xe/xe3p: Disable GuC Dynamic ICS for Xe3p Niranjana Vishwanathapura
2025-11-21 3:51 ` [PATCH v3 16/18] drm/xe/doc: Add documentation for Multi Queue Group Niranjana Vishwanathapura
2025-11-22 6:02 ` Matthew Brost
2025-11-21 3:51 ` [PATCH v3 17/18] drm/xe/doc: Add documentation for Multi Queue Group GuC interface Niranjana Vishwanathapura
2025-11-22 6:10 ` Matthew Brost
2025-11-21 3:51 ` [PATCH v3 18/18] drm/xe/multi_queue: Enable multi_queue on xe3p_xpc Niranjana Vishwanathapura
2025-11-21 4:01 ` ✗ CI.checkpatch: warning for drm/xe: Multi Queue feature support (rev3) Patchwork
2025-11-21 4:02 ` ✓ CI.KUnit: success " Patchwork
2025-11-21 4:51 ` ✗ Xe.CI.BAT: failure " Patchwork
2025-11-21 8:10 ` ✗ Xe.CI.Full: " Patchwork
2025-11-24 14:04 ` Patchwork
2025-11-27 9:38 ` [PATCH v3 00/18] drm/xe: Multi Queue feature support Hoppe, Mateusz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aSFTcvJjz6NGS4In@nvishwa1-desk \
--to=niranjana.vishwanathapura@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=matthew.brost@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox