From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Cc: <intel-xe@lists.freedesktop.org>, <matthew.brost@intel.com>,
<matthew.d.roper@intel.com>
Subject: Re: [PATCH v6 15/17] drm/xe/multi_queue: Support active group after primary is destroyed
Date: Fri, 19 Dec 2025 16:06:17 -0500 [thread overview]
Message-ID: <aUW-SeH7NnRoN0AM@intel.com> (raw)
In-Reply-To: <20251211010249.1647839-34-niranjana.vishwanathapura@intel.com>
On Wed, Dec 10, 2025 at 05:03:03PM -0800, Niranjana Vishwanathapura wrote:
> Add support to keep the group active after the primary queue is
> destroyed. Instead of killing the primary queue during exec_queue
> destroy ioctl, kill it when all the secondary queues of the group
> are killed.
>
> Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
> Reviewed-by: Matthew Brost <matthew.brost@intel.com>
> ---
> drivers/gpu/drm/xe/xe_device.c | 7 ++-
> drivers/gpu/drm/xe/xe_exec_queue.c | 55 +++++++++++++++++++++++-
> drivers/gpu/drm/xe/xe_exec_queue.h | 2 +
> drivers/gpu/drm/xe/xe_exec_queue_types.h | 4 ++
> include/uapi/drm/xe_drm.h | 4 ++
Hi Niranjana,
Where is the UMD ack for this? Who is using this uAPI?
Thanks,
Rodrigo.
> 5 files changed, 69 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/xe_device.c b/drivers/gpu/drm/xe/xe_device.c
> index 7a498c8db7b1..24efb6a3e0ea 100644
> --- a/drivers/gpu/drm/xe/xe_device.c
> +++ b/drivers/gpu/drm/xe/xe_device.c
> @@ -177,7 +177,12 @@ static void xe_file_close(struct drm_device *dev, struct drm_file *file)
> xa_for_each(&xef->exec_queue.xa, idx, q) {
> if (q->vm && q->hwe->hw_engine_group)
> xe_hw_engine_group_del_exec_queue(q->hwe->hw_engine_group, q);
> - xe_exec_queue_kill(q);
> +
> + if (xe_exec_queue_is_multi_queue_primary(q))
> + xe_exec_queue_group_kill_put(q->multi_queue.group);
> + else
> + xe_exec_queue_kill(q);
> +
> xe_exec_queue_put(q);
> }
> xa_for_each(&xef->vm.xa, idx, vm)
> diff --git a/drivers/gpu/drm/xe/xe_exec_queue.c b/drivers/gpu/drm/xe/xe_exec_queue.c
> index d337b7bc2b80..3f4840d135a0 100644
> --- a/drivers/gpu/drm/xe/xe_exec_queue.c
> +++ b/drivers/gpu/drm/xe/xe_exec_queue.c
> @@ -418,6 +418,26 @@ struct xe_exec_queue *xe_exec_queue_create_bind(struct xe_device *xe,
> }
> ALLOW_ERROR_INJECTION(xe_exec_queue_create_bind, ERRNO);
>
> +static void xe_exec_queue_group_kill(struct kref *ref)
> +{
> + struct xe_exec_queue_group *group = container_of(ref, struct xe_exec_queue_group,
> + kill_refcount);
> + xe_exec_queue_kill(group->primary);
> +}
> +
> +static inline void xe_exec_queue_group_kill_get(struct xe_exec_queue_group *group)
> +{
> + kref_get(&group->kill_refcount);
> +}
> +
> +void xe_exec_queue_group_kill_put(struct xe_exec_queue_group *group)
> +{
> + if (!group)
> + return;
> +
> + kref_put(&group->kill_refcount, xe_exec_queue_group_kill);
> +}
> +
> void xe_exec_queue_destroy(struct kref *ref)
> {
> struct xe_exec_queue *q = container_of(ref, struct xe_exec_queue, refcount);
> @@ -650,6 +670,7 @@ static int xe_exec_queue_group_init(struct xe_device *xe, struct xe_exec_queue *
> group->primary = q;
> group->cgp_bo = bo;
> INIT_LIST_HEAD(&group->list);
> + kref_init(&group->kill_refcount);
> xa_init_flags(&group->xa, XA_FLAGS_ALLOC1);
> mutex_init(&group->list_lock);
> q->multi_queue.group = group;
> @@ -725,6 +746,11 @@ static int xe_exec_queue_group_add(struct xe_device *xe, struct xe_exec_queue *q
>
> q->multi_queue.pos = pos;
>
> + if (group->primary->multi_queue.keep_active) {
> + xe_exec_queue_group_kill_get(group);
> + q->multi_queue.keep_active = true;
> + }
> +
> return 0;
> }
>
> @@ -738,6 +764,11 @@ static void xe_exec_queue_group_delete(struct xe_device *xe, struct xe_exec_queu
> lrc = xa_erase(&group->xa, q->multi_queue.pos);
> xe_assert(xe, lrc);
> xe_lrc_put(lrc);
> +
> + if (q->multi_queue.keep_active) {
> + xe_exec_queue_group_kill_put(group);
> + q->multi_queue.keep_active = false;
> + }
> }
>
> static int exec_queue_set_multi_group(struct xe_device *xe, struct xe_exec_queue *q,
> @@ -759,12 +790,24 @@ static int exec_queue_set_multi_group(struct xe_device *xe, struct xe_exec_queue
> return -EINVAL;
>
> if (value & DRM_XE_MULTI_GROUP_CREATE) {
> - if (XE_IOCTL_DBG(xe, value & ~DRM_XE_MULTI_GROUP_CREATE))
> + if (XE_IOCTL_DBG(xe, value & ~(DRM_XE_MULTI_GROUP_CREATE |
> + DRM_XE_MULTI_GROUP_KEEP_ACTIVE)))
> + return -EINVAL;
> +
> + /*
> + * KEEP_ACTIVE is not supported in preempt fence mode as in that mode,
> + * VM_DESTROY ioctl expects all exec queues of that VM are already killed.
> + */
> + if (XE_IOCTL_DBG(xe, (value & DRM_XE_MULTI_GROUP_KEEP_ACTIVE) &&
> + xe_vm_in_preempt_fence_mode(q->vm)))
> return -EINVAL;
>
> q->multi_queue.valid = true;
> q->multi_queue.is_primary = true;
> q->multi_queue.pos = 0;
> + if (value & DRM_XE_MULTI_GROUP_KEEP_ACTIVE)
> + q->multi_queue.keep_active = true;
> +
> return 0;
> }
>
> @@ -1312,6 +1355,11 @@ void xe_exec_queue_kill(struct xe_exec_queue *q)
>
> q->ops->kill(q);
> xe_vm_remove_compute_exec_queue(q->vm, q);
> +
> + if (!xe_exec_queue_is_multi_queue_primary(q) && q->multi_queue.keep_active) {
> + xe_exec_queue_group_kill_put(q->multi_queue.group);
> + q->multi_queue.keep_active = false;
> + }
> }
>
> int xe_exec_queue_destroy_ioctl(struct drm_device *dev, void *data,
> @@ -1338,7 +1386,10 @@ int xe_exec_queue_destroy_ioctl(struct drm_device *dev, void *data,
> if (q->vm && q->hwe->hw_engine_group)
> xe_hw_engine_group_del_exec_queue(q->hwe->hw_engine_group, q);
>
> - xe_exec_queue_kill(q);
> + if (xe_exec_queue_is_multi_queue_primary(q))
> + xe_exec_queue_group_kill_put(q->multi_queue.group);
> + else
> + xe_exec_queue_kill(q);
>
> trace_xe_exec_queue_close(q);
> xe_exec_queue_put(q);
> diff --git a/drivers/gpu/drm/xe/xe_exec_queue.h b/drivers/gpu/drm/xe/xe_exec_queue.h
> index ffcc1feb879e..10abed98fb6b 100644
> --- a/drivers/gpu/drm/xe/xe_exec_queue.h
> +++ b/drivers/gpu/drm/xe/xe_exec_queue.h
> @@ -113,6 +113,8 @@ static inline struct xe_exec_queue *xe_exec_queue_multi_queue_primary(struct xe_
> return xe_exec_queue_is_multi_queue(q) ? q->multi_queue.group->primary : q;
> }
>
> +void xe_exec_queue_group_kill_put(struct xe_exec_queue_group *group);
> +
> bool xe_exec_queue_is_lr(struct xe_exec_queue *q);
>
> bool xe_exec_queue_is_idle(struct xe_exec_queue *q);
> diff --git a/drivers/gpu/drm/xe/xe_exec_queue_types.h b/drivers/gpu/drm/xe/xe_exec_queue_types.h
> index 5fc516b0bb77..67ea5eebf70b 100644
> --- a/drivers/gpu/drm/xe/xe_exec_queue_types.h
> +++ b/drivers/gpu/drm/xe/xe_exec_queue_types.h
> @@ -62,6 +62,8 @@ struct xe_exec_queue_group {
> struct list_head list;
> /** @list_lock: Secondary queue list lock */
> struct mutex list_lock;
> + /** @kill_refcount: ref count to kill primary queue */
> + struct kref kill_refcount;
> /** @sync_pending: CGP_SYNC_DONE g2h response pending */
> bool sync_pending;
> /** @banned: Group banned */
> @@ -161,6 +163,8 @@ struct xe_exec_queue {
> u8 valid:1;
> /** @multi_queue.is_primary: Is primary queue (Q0) of the group */
> u8 is_primary:1;
> + /** @multi_queue.keep_active: Keep the group active after primary is destroyed */
> + u8 keep_active:1;
> } multi_queue;
>
> /** @sched_props: scheduling properties */
> diff --git a/include/uapi/drm/xe_drm.h b/include/uapi/drm/xe_drm.h
> index 705081bf0d81..bd6154e3b728 100644
> --- a/include/uapi/drm/xe_drm.h
> +++ b/include/uapi/drm/xe_drm.h
> @@ -1280,6 +1280,9 @@ struct drm_xe_vm_bind {
> * then a new multi-queue group is created with this queue as the primary queue
> * (Q0). Otherwise, the queue gets added to the multi-queue group whose primary
> * queue's exec_queue_id is specified in the lower 32 bits of the 'value' field.
> + * If the extension's 'value' field has %DRM_XE_MULTI_GROUP_KEEP_ACTIVE flag
> + * set, then the multi-queue group is kept active after the primary queue is
> + * destroyed.
> * All the other non-relevant bits of extension's 'value' field while adding the
> * primary or the secondary queues of the group must be set to 0.
> * - %DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE_PRIORITY - Set the queue
> @@ -1328,6 +1331,7 @@ struct drm_xe_exec_queue_create {
> #define DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE 3
> #define DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_GROUP 4
> #define DRM_XE_MULTI_GROUP_CREATE (1ull << 63)
> +#define DRM_XE_MULTI_GROUP_KEEP_ACTIVE (1ull << 62)
> #define DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE_PRIORITY 5
> /** @extensions: Pointer to the first extension struct, if any */
> __u64 extensions;
> --
> 2.43.0
>
next prev parent reply other threads:[~2025-12-19 21:06 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-11 1:02 [PATCH v6 00/17] drm/xe: Multi Queue feature support Niranjana Vishwanathapura
2025-12-11 1:02 ` [PATCH v6 01/17] drm/xe/multi_queue: Add multi_queue_enable_mask to gt information Niranjana Vishwanathapura
2025-12-11 1:02 ` [PATCH v6 02/17] drm/xe/multi_queue: Add user interface for multi queue support Niranjana Vishwanathapura
2025-12-11 1:02 ` [PATCH v6 03/17] drm/xe/multi_queue: Add GuC " Niranjana Vishwanathapura
2025-12-11 1:02 ` [PATCH v6 04/17] drm/xe/multi_queue: Add multi queue priority property Niranjana Vishwanathapura
2025-12-11 1:02 ` [PATCH v6 05/17] drm/xe/multi_queue: Handle invalid exec queue property setting Niranjana Vishwanathapura
2025-12-11 1:02 ` [PATCH v6 06/17] drm/xe/multi_queue: Add exec_queue set_property ioctl support Niranjana Vishwanathapura
2026-01-19 16:57 ` Thomas Hellström
2026-01-20 21:06 ` Niranjana Vishwanathapura
2026-01-20 22:20 ` Matthew Brost
2026-01-20 22:30 ` Matthew Brost
2026-01-21 15:29 ` Thomas Hellström
2026-01-21 21:23 ` Niranjana Vishwanathapura
2025-12-11 1:02 ` [PATCH v6 07/17] drm/xe/multi_queue: Add support for multi queue dynamic priority change Niranjana Vishwanathapura
2025-12-11 1:02 ` [PATCH v6 08/17] drm/xe/multi_queue: Add multi queue information to guc_info dump Niranjana Vishwanathapura
2025-12-11 1:02 ` [PATCH v6 09/17] drm/xe/multi_queue: Handle tearing down of a multi queue Niranjana Vishwanathapura
2025-12-11 1:02 ` [PATCH v6 10/17] drm/xe/multi_queue: Set QUEUE_DRAIN_MODE for Multi Queue batches Niranjana Vishwanathapura
2025-12-11 1:02 ` [PATCH v6 11/17] drm/xe/multi_queue: Handle CGP context error Niranjana Vishwanathapura
2025-12-11 1:03 ` [PATCH v6 12/17] drm/xe/multi_queue: Reset GT upon CGP_SYNC failure Niranjana Vishwanathapura
2025-12-11 1:03 ` [PATCH v6 13/17] drm/xe/multi_queue: Teardown group upon job timeout Niranjana Vishwanathapura
2025-12-11 1:03 ` [PATCH v6 14/17] drm/xe/multi_queue: Tracepoint support Niranjana Vishwanathapura
2025-12-11 1:03 ` [PATCH v6 15/17] drm/xe/multi_queue: Support active group after primary is destroyed Niranjana Vishwanathapura
2025-12-19 21:06 ` Rodrigo Vivi [this message]
2025-12-19 22:35 ` Niranjana Vishwanathapura
2025-12-19 22:53 ` Matt Roper
2025-12-31 1:51 ` Niranjana Vishwanathapura
2025-12-11 1:03 ` [PATCH v6 16/17] drm/xe/doc: Add documentation for Multi Queue Group Niranjana Vishwanathapura
2025-12-11 1:03 ` [PATCH v6 17/17] drm/xe/doc: Add documentation for Multi Queue Group GuC interface Niranjana Vishwanathapura
2025-12-11 1:11 ` ✗ CI.checkpatch: warning for drm/xe: Multi Queue feature support (rev6) Patchwork
2025-12-11 1:12 ` ✓ CI.KUnit: success " Patchwork
2025-12-11 2:25 ` ✓ Xe.CI.BAT: " Patchwork
2025-12-11 10:04 ` ✗ Xe.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aUW-SeH7NnRoN0AM@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=matthew.brost@intel.com \
--cc=matthew.d.roper@intel.com \
--cc=niranjana.vishwanathapura@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox