From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Arun R Murthy <arun.r.murthy@intel.com>
Cc: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
imre.deak@intel.com, suraj.kandpal@intel.com
Subject: Re: [PATCH] drm/i915/dp: On DPCD init/caps wake the DPRx
Date: Thu, 19 Feb 2026 16:53:07 +0200 [thread overview]
Message-ID: <aZcj08k5dG4lxRNE@intel.com> (raw)
In-Reply-To: <20260219094326.34922-1-arun.r.murthy@intel.com>
On Thu, Feb 19, 2026 at 03:13:26PM +0530, Arun R Murthy wrote:
> Before reading the DPCD caps for eDP wake the sink device and for DP
> after reading the lttpr caps and before reading the dpcd caps wake up
> the sink device.
Why?
>
> Closes: https://issues.redhat.com/browse/RHEL-120913
> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 41 +++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_dp.h | 1 +
> .../drm/i915/display/intel_dp_link_training.c | 3 ++
> 3 files changed, 45 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 454e6144ee4e..2fbb947e6cc8 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -4705,6 +4705,45 @@ intel_edp_set_sink_rates(struct intel_dp *intel_dp)
> intel_edp_set_data_override_rates(intel_dp);
> }
>
> +void intel_dp_wake_sink(struct intel_dp *intel_dp)
> +{
> + u8 value = 0;
> + int ret = 0, try = 0;
> +
> + intel_dp_dpcd_set_probe(intel_dp, false);
> +
> + /*
> + * Wake the sink device
> + * Spec DP2.1 section 2.3.1.2 if AUX CH is powered down by writing 0x02
> + * to DP_SET_POWER dpcd reg, 1ms time would be required to wake it up
> + */
> + while (try < 10 && ret < 0) {
> + ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_SET_POWER, &value);
> + /*
> + * If sink is in D3 then it may not respond to the AUX tx so
> + * wake it up to D3_AUX_ON state
> + */
> + if (value == DP_SET_POWER_D3) {
> + /* After setting to D0 need a min of 1ms to wake(Spec DP2.1 sec 2.3.1.2) */
> + drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
> + DP_SET_POWER_D0);
> + fsleep(1000);
> + drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
> + DP_SET_POWER_D3_AUX_ON);
> + break;
> + } else if ((value == DP_SET_POWER_D0) ||
> + (value == DP_SET_POWER_D3_AUX_ON)) {
> + /* if in D0 or D3_AUX_ON exit */
> + break;
> + }
> + /* Sink in D0 or even if read fails a minimum of 1ms is required to wake and respond */
> + fsleep(1000);
> + try++;
> + }
> +
> + intel_dp_dpcd_set_probe(intel_dp, true);
> +}
> +
> static bool
> intel_edp_init_dpcd(struct intel_dp *intel_dp, struct intel_connector *connector)
> {
> @@ -4713,6 +4752,8 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp, struct intel_connector *connector
> /* this function is meant to be called only once */
> drm_WARN_ON(display->drm, intel_dp->dpcd[DP_DPCD_REV] != 0);
>
> + intel_dp_wake_sink(intel_dp);
> +
> if (drm_dp_read_dpcd_caps(&intel_dp->aux, intel_dp->dpcd) != 0)
> return false;
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
> index b0bbd5981f57..3f16077c0cc7 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -232,6 +232,7 @@ bool intel_dp_dotclk_valid(struct intel_display *display,
> bool intel_dp_joiner_candidate_valid(struct intel_connector *connector,
> int hdisplay,
> int num_joined_pipes);
> +void intel_dp_wake_sink(struct intel_dp *intel_dp);
>
> #define for_each_joiner_candidate(__connector, __mode, __num_joined_pipes) \
> for ((__num_joined_pipes) = 1; (__num_joined_pipes) <= (I915_MAX_PIPES); (__num_joined_pipes)++) \
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> index 54c585c59b90..cbb712ea9f60 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> @@ -270,6 +270,9 @@ int intel_dp_init_lttpr_and_dprx_caps(struct intel_dp *intel_dp)
> lttpr_count = intel_dp_init_lttpr(intel_dp, dpcd);
> }
>
> + /* After reading LTTPR wake up the sink before reading DPRX caps */
> + intel_dp_wake_sink(intel_dp);
> +
> /*
> * The DPTX shall read the DPRX caps after LTTPR detection, so re-read
> * it here.
> --
> 2.25.1
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2026-02-19 14:53 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-19 9:43 [PATCH] drm/i915/dp: On DPCD init/caps wake the DPRx Arun R Murthy
2026-02-19 10:45 ` ✗ CI.checkpatch: warning for " Patchwork
2026-02-19 10:46 ` ✓ CI.KUnit: success " Patchwork
2026-02-19 11:22 ` ✓ Xe.CI.BAT: " Patchwork
2026-02-19 14:20 ` ✗ Xe.CI.FULL: failure " Patchwork
2026-02-19 14:53 ` Ville Syrjälä [this message]
2026-02-19 15:12 ` [PATCH] " Murthy, Arun R
2026-02-20 3:11 ` Ville Syrjälä
2026-02-20 5:01 ` Murthy, Arun R
2026-02-24 8:24 ` Ville Syrjälä
2026-02-24 8:48 ` Murthy, Arun R
2026-02-24 7:48 ` [PATCHv2] " Arun R Murthy
2026-02-24 14:50 ` Imre Deak
2026-02-25 3:33 ` Murthy, Arun R
2026-02-25 5:58 ` Murthy, Arun R
2026-03-02 7:57 ` Imre Deak
2026-03-02 9:04 ` Murthy, Arun R
2026-03-02 9:20 ` Imre Deak
2026-03-10 8:52 ` Murthy, Arun R
2026-02-24 7:56 ` ✓ CI.KUnit: success for drm/i915/dp: On DPCD init/caps wake the DPRx (rev2) Patchwork
2026-02-25 6:11 ` [PATCHv3] drm/i915/dp: On DPCD init wake the DPRx for eDP Arun R Murthy
2026-02-25 6:19 ` ✓ CI.KUnit: success for drm/i915/dp: On DPCD init/caps wake the DPRx (rev3) Patchwork
2026-02-25 6:56 ` ✓ Xe.CI.BAT: " Patchwork
2026-02-25 11:20 ` ✗ Xe.CI.FULL: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aZcj08k5dG4lxRNE@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=arun.r.murthy@intel.com \
--cc=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=suraj.kandpal@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox