public inbox for intel-xe@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Mallesh, Koujalagi" <mallesh.koujalagi@intel.com>
To: Riana Tauro <riana.tauro@intel.com>, <intel-xe@lists.freedesktop.org>
Cc: <anshuman.gupta@intel.com>, <rodrigo.vivi@intel.com>,
	<aravind.iddamsetty@linux.intel.com>, <badal.nilawar@intel.com>,
	<raag.jadav@intel.com>, <ravi.kishore.koppuravuri@intel.com>
Subject: Re: [PATCH 2/8] drm/xe/xe_pci_error: Implement PCI error recovery callbacks
Date: Mon, 16 Feb 2026 14:23:07 +0530	[thread overview]
Message-ID: <b903b2bb-572b-4269-81c7-792b16e2acaf@intel.com> (raw)
In-Reply-To: <20260122100613.3631582-12-riana.tauro@intel.com>

[-- Attachment #1: Type: text/plain, Size: 6545 bytes --]

Hi Riana,

On 22-01-2026 03:36 pm, Riana Tauro wrote:
> Add error_detected, mmio_enabled, slot_reset and resume
> recovery callbacks to handle PCIe Advanced Error Reporting
> (AER) errors.
>
> For fatal errors, the device is wedged and becomes
> inaccessible. Return PCI_ERS_RESULT_SLOT_RESET from
> error_detected to request a Secondary Bus Reset (SBR).
>
> For non-fatal errors, return PCI_ERS_RESULT_CAN_RECOVER from
> error_detected to trigger the mmio_enabled callback. In this callback,
> the device is queried to determine the error cause and attempt
> recovery based on the error type.
>
> Once the secondary bus reset(SBR) is completed the slot_reset callback
> cleanly removes and reprobe the device to restore functionality.
>
> Signed-off-by: Riana Tauro<riana.tauro@intel.com>
> ---
>   drivers/gpu/drm/xe/Makefile          |  1 +
>   drivers/gpu/drm/xe/xe_device.h       | 15 +++++
>   drivers/gpu/drm/xe/xe_device_types.h |  3 +
>   drivers/gpu/drm/xe/xe_pci.c          |  3 +
>   drivers/gpu/drm/xe/xe_pci_error.c    | 85 ++++++++++++++++++++++++++++
>   5 files changed, 107 insertions(+)
>   create mode 100644 drivers/gpu/drm/xe/xe_pci_error.c
>
> diff --git a/drivers/gpu/drm/xe/Makefile b/drivers/gpu/drm/xe/Makefile
> index f6650ec3ab42..5581f2180b5c 100644
> --- a/drivers/gpu/drm/xe/Makefile
> +++ b/drivers/gpu/drm/xe/Makefile
> @@ -98,6 +98,7 @@ xe-y += xe_bb.o \
>   	xe_page_reclaim.o \
>   	xe_pat.o \
>   	xe_pci.o \
> +	xe_pci_error.o \
>   	xe_pci_rebar.o \
>   	xe_pcode.o \
>   	xe_pm.o \
> diff --git a/drivers/gpu/drm/xe/xe_device.h b/drivers/gpu/drm/xe/xe_device.h
> index 58d7d8b2fea3..81480248eeff 100644
> --- a/drivers/gpu/drm/xe/xe_device.h
> +++ b/drivers/gpu/drm/xe/xe_device.h
> @@ -43,6 +43,21 @@ static inline struct xe_device *ttm_to_xe_device(struct ttm_device *ttm)
>   	return container_of(ttm, struct xe_device, ttm);
>   }
>   
> +static inline bool xe_device_is_in_recovery(struct xe_device *xe)
> +{
> +	return atomic_read(&xe->in_recovery);
> +}
> +
> +static inline void xe_device_set_in_recovery(struct xe_device *xe)
> +{
> +	atomic_set(&xe->in_recovery, 1);
> +}
> +
> +static inline void xe_device_clear_in_recovery(struct xe_device *xe)
> +{
> +	 atomic_set(&xe->in_recovery, 0);
> +}
> +
>   struct xe_device *xe_device_create(struct pci_dev *pdev,
>   				   const struct pci_device_id *ent);
>   int xe_device_probe_early(struct xe_device *xe);
> diff --git a/drivers/gpu/drm/xe/xe_device_types.h b/drivers/gpu/drm/xe/xe_device_types.h
> index 944f909a86ad..2d140463dc5e 100644
> --- a/drivers/gpu/drm/xe/xe_device_types.h
> +++ b/drivers/gpu/drm/xe/xe_device_types.h
> @@ -669,6 +669,9 @@ struct xe_device {
>   		bool inconsistent_reset;
>   	} wedged;
>   
> +	/** @in_recovery: Indicates if device is in recovery */
> +	atomic_t in_recovery;
> +
>   	/** @bo_device: Struct to control async free of BOs */
>   	struct xe_bo_dev {
>   		/** @bo_device.async_free: Free worker */
> diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c
> index c92cc176f669..e1ee393b7461 100644
> --- a/drivers/gpu/drm/xe/xe_pci.c
> +++ b/drivers/gpu/drm/xe/xe_pci.c
> @@ -1255,6 +1255,8 @@ static const struct dev_pm_ops xe_pm_ops = {
>   };
>   #endif
>   
> +extern const struct pci_error_handlers xe_pci_error_handlers;
> +
>   static struct pci_driver xe_pci_driver = {
>   	.name = DRIVER_NAME,
>   	.id_table = pciidlist,
> @@ -1262,6 +1264,7 @@ static struct pci_driver xe_pci_driver = {
>   	.remove = xe_pci_remove,
>   	.shutdown = xe_pci_shutdown,
>   	.sriov_configure = xe_pci_sriov_configure,
> +	.err_handler = &xe_pci_error_handlers,
>   #ifdef CONFIG_PM_SLEEP
>   	.driver.pm = &xe_pm_ops,
>   #endif
> diff --git a/drivers/gpu/drm/xe/xe_pci_error.c b/drivers/gpu/drm/xe/xe_pci_error.c
> new file mode 100644
> index 000000000000..a3cc01afa179
> --- /dev/null
> +++ b/drivers/gpu/drm/xe/xe_pci_error.c
> @@ -0,0 +1,85 @@
> +// SPDX-License-Identifier: MIT
> +/*
> + * Copyright © 2026 Intel Corporation
> + */
> +#include <drm/drm_drv.h>
> +#include <linux/pci.h>
> +
> +#include "xe_device.h"
> +#include "xe_gt.h"
> +#include "xe_pci.h"
> +#include "xe_uc.h"
> +
> +static void xe_pci_error_handling(struct pci_dev *pdev)
> +{
> +	struct xe_device *xe = pdev_to_xe_device(pdev);
> +
> +	xe_device_set_in_recovery(xe);
> +	xe_device_declare_wedged(xe);
> +
> +	pci_disable_device(pdev);
> +}
> +
> +static pci_ers_result_t xe_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
> +{
> +	dev_err(&pdev->dev, "PCI error detected, state %d\n", state);
> +
We need to set recovery flag here right?
> +	switch (state) {
> +	case pci_channel_io_normal:
> +		return PCI_ERS_RESULT_CAN_RECOVER;
> +	case pci_channel_io_frozen:
> +		xe_pci_error_handling(pdev);
> +		return PCI_ERS_RESULT_NEED_RESET;
> +	case pci_channel_io_perm_failure:
> +		return PCI_ERS_RESULT_DISCONNECT;
> +	}
> +
> +	return PCI_ERS_RESULT_NEED_RESET;
Please make default case where we see "Unknown channel state" as dev_err 
and return PCI_ERS_RESULT_NEED_RESET.
> +}
> +
> +static pci_ers_result_t xe_pci_error_mmio_enabled(struct pci_dev *pdev)
> +{
> +	dev_err(&pdev->dev, "PCI mmio enabled\n");
> +
> +	return PCI_ERS_RESULT_NEED_RESET;
> +}
> +
> +static pci_ers_result_t xe_pci_error_slot_reset(struct pci_dev *pdev)
> +{
> +	const struct pci_device_id *ent = pci_match_id(pdev->driver->id_table, pdev);
> +	struct xe_device *xe = pdev_to_xe_device(pdev);
> +
Check xe is null or not? if null then return PCI_ERS_RESULT_DISCONNECT.
> +	dev_err(&pdev->dev, "PCI slot reset\n");
> +
> +	pci_restore_state(pdev);
> +
> +	if (pci_enable_device(pdev)) {
> +		dev_err(&pdev->dev,
> +			"Cannot re-enable PCI device after reset\n");
> +		return PCI_ERS_RESULT_DISCONNECT;
> +	}
> +
> +	/*
> +	 * Secondary Bus Reset wipes out all device memory
> +	 * requiring XE KMD to perform a device removal and reprobe.
> +	 */
> +	pdev->driver->remove(pdev);
> +	xe_device_clear_in_recovery(xe);
> +
> +	if (!pdev->driver->probe(pdev, ent))
> +		return PCI_ERS_RESULT_RECOVERED;
> +
> +	return PCI_ERS_RESULT_RECOVERED;
> +}
> +
> +static void xe_pci_error_resume(struct pci_dev *pdev)
> +{
> +	dev_info(&pdev->dev, "PCI error resume\n");

We need to clear recovery flag (if not already cleared), for normal 
operations.

Thanks

-/Mallesh

> +}
> +
> +const struct pci_error_handlers xe_pci_error_handlers = {
> +	.error_detected	= xe_pci_error_detected,
> +	.mmio_enabled	= xe_pci_error_mmio_enabled,
> +	.slot_reset	= xe_pci_error_slot_reset,
> +	.resume		= xe_pci_error_resume,
> +};

[-- Attachment #2: Type: text/html, Size: 7520 bytes --]

  parent reply	other threads:[~2026-02-16  8:53 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-22 10:06 [PATCH 0/8] Introduce Xe Uncorrectable Error Handling Riana Tauro
2026-01-22  9:42 ` ✗ CI.checkpatch: warning for " Patchwork
2026-01-22  9:43 ` ✓ CI.KUnit: success " Patchwork
2026-01-22 10:06 ` [PATCH 1/8] drm/xe/xe_sysctrl: Add System controller patch Riana Tauro
2026-01-22 10:06 ` [PATCH 2/8] drm/xe/xe_pci_error: Implement PCI error recovery callbacks Riana Tauro
2026-01-27 22:49   ` Michal Wajdeczko
2026-02-02  9:45     ` Riana Tauro
2026-01-29  9:09   ` Nilawar, Badal
2026-02-02 13:19     ` Nilawar, Badal
2026-02-03  3:46       ` Riana Tauro
2026-02-03  3:41     ` Riana Tauro
2026-02-08  8:02   ` Raag Jadav
2026-02-24  3:23     ` Riana Tauro
2026-02-24  5:33       ` Raag Jadav
2026-02-16  8:53   ` Mallesh, Koujalagi [this message]
2026-02-24  3:26     ` Riana Tauro
2026-01-22 10:06 ` [PATCH 3/8] drm/xe/xe_pci_error: Group all devres to release them on PCIe slot reset Riana Tauro
2026-01-27 11:23   ` Mallesh, Koujalagi
2026-02-02  8:46     ` Riana Tauro
2026-01-22 10:06 ` [PATCH 4/8] drm/xe: Skip device access during PCI error recovery Riana Tauro
2026-01-22 10:06 ` [PATCH 5/8] drm/xe/xe_ras: Initialize Uncorrectable AER Registers Riana Tauro
2026-01-27 12:41   ` Mallesh, Koujalagi
2026-02-02  9:34     ` Riana Tauro
2026-02-04  8:38   ` Aravind Iddamsetty
2026-02-16 12:27   ` Mallesh, Koujalagi
2026-02-18 14:48     ` Riana Tauro
2026-01-22 10:06 ` [PATCH 6/8] drm/xe/xe_ras: Add structures and commands for Uncorrectable Core Compute Errors Riana Tauro
2026-02-23 14:19   ` Mallesh, Koujalagi
2026-02-23 14:30     ` Riana Tauro
2026-01-22 10:06 ` [PATCH 7/8] drm/xe/xe_ras: Add support for Uncorrectable Core-Compute errors Riana Tauro
2026-01-27 11:44   ` Mallesh, Koujalagi
2026-02-02  8:38     ` Riana Tauro
2026-01-27 14:03   ` Mallesh, Koujalagi
2026-02-02  8:54     ` Riana Tauro
2026-02-24 12:17     ` Mallesh, Koujalagi
2026-02-17 14:02   ` Raag Jadav
2026-02-23 14:10     ` Riana Tauro
2026-01-22 10:06 ` [PATCH 8/8] drm/xe/xe_pci_error: Process errors in mmio_enabled Riana Tauro
2026-02-24 12:46   ` Mallesh, Koujalagi
2026-01-22 10:21 ` ✓ Xe.CI.BAT: success for Introduce Xe Uncorrectable Error Handling Patchwork
2026-01-22 20:28 ` ✗ Xe.CI.Full: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b903b2bb-572b-4269-81c7-792b16e2acaf@intel.com \
    --to=mallesh.koujalagi@intel.com \
    --cc=anshuman.gupta@intel.com \
    --cc=aravind.iddamsetty@linux.intel.com \
    --cc=badal.nilawar@intel.com \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=raag.jadav@intel.com \
    --cc=ravi.kishore.koppuravuri@intel.com \
    --cc=riana.tauro@intel.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox