From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Subject: Re: [PATCH 2/5] drm/i915/dsi: s/eotp_pkt/eot_pkt/
Date: Thu, 26 Mar 2026 17:22:16 +0200 [thread overview]
Message-ID: <dd598a54a852038b91659752d3357220d2a54d68@intel.com> (raw)
In-Reply-To: <20260326111814.9800-3-ville.syrjala@linux.intel.com>
On Thu, 26 Mar 2026, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> eotp == "End of Transmission Packet". Drop the redundant
> extra 'p' from 'eotp_pkt', and make the thing a boolean
> while at it.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/display/icl_dsi.c | 2 +-
> drivers/gpu/drm/i915/display/intel_dsi.h | 3 +--
> drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 4 ++--
> drivers/gpu/drm/i915/display/vlv_dsi.c | 2 +-
> 4 files changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index a763f2b13ff2..6ea37929198c 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -711,7 +711,7 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder,
> dsi_trans = dsi_port_to_transcoder(port);
> tmp = intel_de_read(display, DSI_TRANS_FUNC_CONF(dsi_trans));
>
> - if (intel_dsi->eotp_pkt)
> + if (intel_dsi->eot_pkt)
> tmp &= ~EOTP_DISABLED;
> else
> tmp |= EOTP_DISABLED;
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi.h b/drivers/gpu/drm/i915/display/intel_dsi.h
> index 489d26ffd235..8e39d2b52c54 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/display/intel_dsi.h
> @@ -80,8 +80,7 @@ struct intel_dsi {
> /* NON_BURST_SYNC_PULSE, NON_BURST_SYNC_EVENTS, or BURST_MODE */
> int video_mode;
>
> - /* eot for MIPI_EOT_DISABLE register */
> - u8 eotp_pkt;
> + bool eot_pkt;
> u8 clock_stop;
>
> u8 escape_clk_div;
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> index 18755a8e613d..51f6a5b82cb2 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> @@ -718,7 +718,7 @@ void intel_dsi_log_params(struct intel_dsi *intel_dsi)
> "burst" : "<unknown>");
> drm_printf(&p, "Burst mode ratio %d\n", intel_dsi->burst_mode_ratio);
> drm_printf(&p, "Reset timer %d\n", intel_dsi->rst_timer_val);
> - drm_printf(&p, "Eot %s\n", str_enabled_disabled(intel_dsi->eotp_pkt));
> + drm_printf(&p, "EoT packet %s\n", str_enabled_disabled(intel_dsi->eot_pkt));
> drm_printf(&p, "Clockstop %s\n", str_enabled_disabled(!intel_dsi->clock_stop));
> drm_printf(&p, "Mode %s\n", intel_dsi->operation_mode ? "command" : "video");
> if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
> @@ -770,7 +770,7 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>
> drm_dbg_kms(display->drm, "\n");
>
> - intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
> + intel_dsi->eot_pkt = !mipi_config->eot_pkt_disabled;
> intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
> intel_dsi->lane_count = mipi_config->lane_cnt + 1;
> intel_dsi->pixel_format =
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index 36591d724638..d4db73c184e5 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1367,7 +1367,7 @@ static void intel_dsi_prepare(struct intel_encoder *encoder,
> }
>
> tmp = 0;
> - if (intel_dsi->eotp_pkt == 0)
> + if (!intel_dsi->eot_pkt)
> tmp |= EOT_DISABLE;
> if (intel_dsi->clock_stop)
> tmp |= CLOCKSTOP;
--
Jani Nikula, Intel
next prev parent reply other threads:[~2026-03-26 15:22 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-26 11:18 [PATCH 0/5] drm/i915/dsi: Some DSI fixes and improvements Ville Syrjala
2026-03-26 11:18 ` [PATCH 1/5] drm/i915/dsi: Don't do DSC horizontal timing adjustments in command mode Ville Syrjala
2026-03-26 15:20 ` Jani Nikula
2026-03-26 11:18 ` [PATCH 2/5] drm/i915/dsi: s/eotp_pkt/eot_pkt/ Ville Syrjala
2026-03-26 15:22 ` Jani Nikula [this message]
2026-03-26 11:18 ` [PATCH 3/5] drm/i915/dsi: Make 'clock_stop' boolean Ville Syrjala
2026-03-26 13:40 ` Jani Nikula
2026-03-26 14:02 ` Ville Syrjälä
2026-03-26 15:01 ` Jani Nikula
2026-03-26 15:16 ` Ville Syrjälä
2026-03-26 15:22 ` Jani Nikula
2026-03-26 11:18 ` [PATCH 4/5] drm/i915/dsi: Fill BLLPs with blanking packets if requested Ville Syrjala
2026-03-26 15:23 ` Jani Nikula
2026-03-26 11:18 ` [PATCH 5/5] drm/i915/dsi: Place clock into LP during LPM " Ville Syrjala
2026-03-26 15:24 ` Jani Nikula
2026-03-26 11:24 ` ✗ CI.checkpatch: warning for drm/i915/dsi: Some DSI fixes and improvements Patchwork
2026-03-26 11:26 ` ✓ CI.KUnit: success " Patchwork
2026-03-26 12:00 ` ✓ Xe.CI.BAT: " Patchwork
2026-03-27 0:36 ` ✓ Xe.CI.FULL: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dd598a54a852038b91659752d3357220d2a54d68@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox