Replace drm_err() calls with xe_log_err() using the HWMON component
tag to enable structured error reporting with SIGID for hardware
monitor failures:

Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
---
 drivers/gpu/drm/xe/xe_hwmon.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/xe/xe_hwmon.c b/drivers/gpu/drm/xe/xe_hwmon.c
index 5284cab6703d..9ff351e87e5a 100644
--- a/drivers/gpu/drm/xe/xe_hwmon.c
+++ b/drivers/gpu/drm/xe/xe_hwmon.c
@@ -15,6 +15,7 @@
 #include "regs/xe_pcode_regs.h"
 #include "xe_device.h"
 #include "xe_hwmon.h"
+#include "xe_log.h"
 #include "xe_mmio.h"
 #include "xe_pcode.h"
 #include "xe_pcode_api.h"
@@ -563,9 +564,9 @@ xe_hwmon_power_max_interval_show(struct device *dev, struct device_attribute *at
 	if (hwmon->xe->info.has_mbx_power_limits) {
 		ret = xe_hwmon_pcode_read_power_limit(hwmon, power_attr, channel, &reg_val);
 		if (ret) {
-			drm_err(&hwmon->xe->drm,
-				"power interval read fail, ch %d, attr %d, val 0x%08x, ret %d\n",
-				channel, power_attr, reg_val, ret);
+			xe_log_err(hwmon->xe, HWMON, -EIO,

+				   "power interval read fail, ch %d, attr %d, val 0x%08x, ret %d\n",
+				   channel, power_attr, reg_val, ret);

 			reg_val = 0;
 		}
 	} else {
@@ -1599,7 +1600,8 @@ int xe_hwmon_register(struct xe_device *xe)
 								&hwmon_chip_info,
 								hwmon_groups);
 	if (IS_ERR(hwmon->hwmon_dev)) {
-		drm_err(&xe->drm, "Failed to register xe hwmon (%pe)\n", hwmon->hwmon_dev);
+		xe_log_err(xe, HWMON, -EIO,

+			   "Failed to register xe hwmon (%pe)", hwmon->hwmon_dev);

nit: Once we pass correct errno, no need to log so remove hwmon->hwmon_dev.

nit: add '\n' end of message

Thanks,

-/Mallesh

 		xe->hwmon = NULL;
 		return PTR_ERR(hwmon->hwmon_dev);
 	}