From: "Nautiyal, Ankit K" <ankit.k.nautiyal@intel.com>
To: <intel-gfx@lists.freedesktop.org>
Cc: <intel-xe@lists.freedesktop.org>, <jani.nikula@linux.intel.com>,
<imre.deak@intel.com>, "Kandpal, Suraj" <suraj.kandpal@intel.com>
Subject: Re: [PATCH] drm/i915/dp: Return early if dsc is required but not supported
Date: Tue, 7 Jan 2025 13:51:20 +0530 [thread overview]
Message-ID: <eec5f895-bb21-4447-8167-65d6d46ee1dc@intel.com> (raw)
In-Reply-To: <20250103031424.1732774-1-ankit.k.nautiyal@intel.com>
On 1/3/2025 8:44 AM, Ankit Nautiyal wrote:
> Currently, when bandwidth is insufficient for a given mode, we attempt
> to use DSC. This is indicated by a debug print, followed by a check for
> DSC support.
>
> The debug message states that we are trying DSC, but DSC might not be
> supported, which can give an incorrect picture in the logs if we bail
> out later.
>
> Correct the order for both DP and DP MST to:
> - Check if DSC is required and supported, and return early if DSC is
> not supported.
> - Print a debug message to indicate that DSC will be tried next.
>
> Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Thanks for the reviews. Pushed to drm-intel-next.
Regards,
Ankit
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 8 +++++---
> drivers/gpu/drm/i915/display/intel_dp_mst.c | 7 +++++--
> 2 files changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 0d74adae2ec9..4fa0e0b675b0 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2642,15 +2642,17 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
> dsc_needed = true;
> }
>
> + if (dsc_needed && !intel_dp_supports_dsc(intel_dp, connector, pipe_config)) {
> + drm_dbg_kms(display->drm, "DSC required but not available\n");
> + return -EINVAL;
> + }
> +
> if (dsc_needed) {
> drm_dbg_kms(display->drm,
> "Try DSC (fallback=%s, joiner=%s, force=%s)\n",
> str_yes_no(ret), str_yes_no(joiner_needs_dsc),
> str_yes_no(intel_dp->force_dsc_en));
>
> - if (!intel_dp_supports_dsc(intel_dp, connector, pipe_config))
> - return -EINVAL;
> -
> if (!intel_dp_compute_config_limits(intel_dp, pipe_config,
> respect_downstream_limits,
> true,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index fffd199999e0..0433f2ff77e1 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -633,14 +633,17 @@ static int mst_stream_compute_config(struct intel_encoder *encoder,
> dsc_needed = true;
> }
>
> + if (dsc_needed && !intel_dp_supports_dsc(intel_dp, connector, pipe_config)) {
> + drm_dbg_kms(display->drm, "DSC required but not available\n");
> + return -EINVAL;
> + }
> +
> /* enable compression if the mode doesn't fit available BW */
> if (dsc_needed) {
> drm_dbg_kms(display->drm, "Try DSC (fallback=%s, joiner=%s, force=%s)\n",
> str_yes_no(ret), str_yes_no(joiner_needs_dsc),
> str_yes_no(intel_dp->force_dsc_en));
>
> - if (!intel_dp_supports_dsc(intel_dp, connector, pipe_config))
> - return -EINVAL;
>
> if (!mst_stream_compute_config_limits(intel_dp, connector,
> pipe_config, true,
prev parent reply other threads:[~2025-01-07 8:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-03 3:14 [PATCH] drm/i915/dp: Return early if dsc is required but not supported Ankit Nautiyal
2025-01-03 4:30 ` ✓ CI.Patch_applied: success for " Patchwork
2025-01-03 4:30 ` ✓ CI.checkpatch: " Patchwork
2025-01-03 4:32 ` ✓ CI.KUnit: " Patchwork
2025-01-03 4:50 ` ✓ CI.Build: " Patchwork
2025-01-03 4:52 ` ✓ CI.Hooks: " Patchwork
2025-01-03 4:53 ` ✓ CI.checksparse: " Patchwork
2025-01-03 5:26 ` ✓ Xe.CI.BAT: " Patchwork
2025-01-03 5:34 ` [PATCH] " Kandpal, Suraj
2025-01-03 6:58 ` ✗ Xe.CI.Full: failure for " Patchwork
2025-01-03 10:03 ` [PATCH] " Jani Nikula
2025-01-07 8:21 ` Nautiyal, Ankit K [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=eec5f895-bb21-4447-8167-65d6d46ee1dc@intel.com \
--to=ankit.k.nautiyal@intel.com \
--cc=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=suraj.kandpal@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox